http://www.vadriven.com/forums/showthread.php?t=376320

Posting this from another forum.

I am looking to sell my SFWD Ek civic.
Some people might know the car and yes Jason Hunt owned this car a few years ago.
I am looking to either sell it out right or to trade it for a S2000 at a somewhat equal price.

 

.

 

wilwood BBK's x2

http://www.hondamarketplace.com/show....php?t=2864125

 

FS:
aem ugeo o2 controller single channle
part #:
30-2301-01053

120 +shipping



thanks

 

garage sale check it..

http://www.hondamarketplace.com/show...7#post44434407

 

Im selling a complete 5speed gear set. It is PPG 1/2 synchro set with typeS 3-5th. It has brand new synchros except for 5th(but still in good shape) and brand new shaft bearings. Im sellin both shafts complete for $2300 obo or $2200 minus the counter shaft. Counter shaft is a 4.76
Pm me for the ratios.



Thanks
Tim Grey

 

Have a brand new Kens kustom stright axel never installed, direct bolt on for 92-00 civic and 94-00 integ. also have weld gold spindle mount rear skinnies new. Percy pexy glass complete kit for 96-00 civic hatch, new in the box. Precision 800hp front mount intercooler (used but in great cond) Weldon 2025 fuel pump (used but in great conditon). can provide pics if needed.


LOOKING TO TRADE/BUY FOR THE FOLLOWING ITEMS:

2 Tial 44mm Gate (New)
Weld Rims 15" Gold center 4x100
Weld Rims Rear Skinny Gold 4x100
Dog Box Gear set
Quaif lsd
Gsr Trans
72mm Turbo
3 piece frontend for 00 civic
g force long shifter

 

DPR STAGE 5 B-SERIES VALVETRAIN

DPR (dan paramoire racing) had built the head, very reputable company, he's been around for almost 40yrs now doing tha head work. everything completed, but i had switched to Skunk2 Pro1's and the clearance and coil bind isnt going to work. so, long story short i've already installed all my new Supertech head setup, so i have all my DPR Stage 5 valvetrain ready to sell. everything BARELY has 748 miles on them.

SS Valves .5mm in .5mm exh (calico caoted)
Ti retainers
Dual valve springs (max lift is .475)

js looking to get best offers on these to help pay off some of the headwork i had done, and get this ready for the big event out here in AZ for import face-off. pleaseee shoot offers. unfortunately no pix til i go pick up tha stuff later this weekend. but i have plenty of Vouches and Dan himself will tell u, since we talk everyday

623.565.7319

 

Greddy 52mm gauges oil press,boost,egt
light up green are in metric $375obo with 2 Auto Meter 2121 Carbon Fiber Gauge Mount Cup
will post pics 2 night

 

MSD digital 6, blaster SS coil, noise filter and H22 distributor cap only 300 miles on set up $300

 

b16/typer victor intake manifold in great shape. it has been port matched and ported for 75mm tb bye tony palo at t1 race development. it 240.00
i will sand blast intake for 15 dollars more

offers and questions welcome.
call anytime 5757493103 rocky



[IMG][/IMG]

 

Afi/boostflow turbo kit 400 miles garret t/3 60 trim tial 38mvs gate 10psi $1900
complete kit with oil lines and drain same as website




usdm itr seats MINT NO RIPS,TEARS,FADING,BURNS ETC. never seen a set cleaner $900




hondata s300 installed in a obd 1 ecu with cd and usb cord $500


percision 780s 400 miles bad picture sorry $200
AEM fuel rail $100
bbk intake manifold (same as edelbrock victor x) $200
professional products 68mm tb $100
omni 4 bar map sensor $ 75


aluminum radiator $75


jdm gsr head 40k miles $300
type r valve cover $100


jdm gsr trans no grinds pop out etc $500
competition stage 3 clutch 400miles $250


inovate lc1 wide band with cd $100



jdm ITR dual valvesprings 30k miles (still have green ink on them) $50



tial 44mm large red 10 psi spring $20


1993 civic dx shell clean nj title $1300 with
walbro 255 fpr
new ksport 36 way adjustable one peice coilovers $500 plus stock
D2 rear lower control arms $100 plus stock
black housing head lamps $ 100 plus stock
cf mirrors new not pictured but in box $40
energy suspension b series mounts $100
3 inch turbo back straight pipe mandel bent exhaust $100
2004 civic ex wheels $200 plus stock
arp extended lugs
new rear brake shoes/hardware
new front calipers rotors and pads
semi wire tuck
no front seats stock rear black









ALL PRICES ARE OBO BUT DONT DISRESPECT ME. SHIPPING IS NOT INCLUDED NOR PAYPAL FEES 4%. paypal address id d16z6Tcrx@aol.com located in south jersey exit 4 off njtp. pm me first come first serve.

 

Weld 4x100 Import Magnums 15x4 Skinnies with 22" Tires.
Feel Free to text if SERIOUSLY interested (704)781-7165

Shitty Cell Phone Pics for reference..







$700 Shipped for the Skinnies!!!

 

sold

 

Innovative mounts for an h22 into an eg, they are pretty much like new, look at the pics. Axles are also in great condition they're stage 0 drive shaft shop also selling the half shaft for a little more cash







Also for sale
gsr eagle rods $250
aem wideband $170
PIC lower control arms for ek $120
blox lower control arms ( slight used $ 80 )
h22 skunk2 intake manifold $275
h22 skunk2 intake manifold used $245
scion cast turbo manifold $80
d16 cast turbo manifold $80
nissan sr20 stg 2 spec clutch $200
h22 exedy stage 2 clutch an fidanza flywheel ( used but great condtion ) $250

 

I have the following for sale:

Brand new Earl's fuel filter:230206ERL

-6an, 85 micron.

$38 shipped anywhere in the US.

 

I've got a brand new sleeved AEBS GSR (B18C1) block up for grabs... I bought it with intentions of building a turbo b-series... However, I've changed my plans... The block is bored and honed to 85mm... The main caps are all line bored and honed... As I said its a new block, had it sitting down in my apartment since last October... Never spun a bearing, dropped a valve or anything like that... The block is coated with a high temp gray paint and also has in Golden Eagle Oil squirter plugs and has the H22 plugs at the back of the block to support a catch can...

I'm located in Texas.... The block is priced at $1200 plus paypal (4%) and shipping (approximately $80 continental US).... Pick up is also welcome...
Shoot me a PM or Text me anytime @ 940-337-7481

Pictures:

 

full-race front mount turbo manifold. dual 44 gate outlets. t4 flanged.
$950

s372r. race cover. double bore front wheel ($200extra). 87mm turbine wheel ($300extra)
3" vband compressor outlet, 4" vband exhaust outlet
$1050

1000hp spearco air-water intercooler, meziere pump, and water tank setup
$850

Turbosmart 50mm Pro-Gate BNIB
$400

go here for pics of the above: https://honda-tech.com/forums/showth...1#post43188651
post #11

slightly used eagle rods. gsr (87.2mm) stroke. $200.

'91 b16 head. cams, dizzy, vtec solenoid NOT included.

brand new GE sleeved 84mm ls b18b block, micropolished ls crank, acl race rod & main bearings, aluminum girdle w/ arp studs, 9:1 cp pistons. will part pistons and block.

600+whp daily/turn-key race car: http://hondamarketplace.com/showthread.php?t=2853404

 

Exedy Stage1 clutch for H22 (about 150mi on it)--$150
ACT Prolite 8lb flywheel for H22 --$150
Honda Prelude USDM 3rd gear with syncro brand new from honda --$150
Yonaka H/F mount kit for EG solid urethane --$100
Prelude JDM M2A4 Transmission shifts great --$500
Gator Dragracing axles for H/F in EG --$300
OEM JDM Prelude injectors --$60

all are obo + paypal + shipping

 

I have a stock EG cluster with 3 autometer gauges. Speedometer, tachometer and oil pressure gauge.

I also have a gauge bezel were your stock radio or ac control unit goes or if you have the jdm center console. that gauge pod is for three gauges but i only have the water temp and volts!

they are all brand new, there all the same series (pro-comp)

Asking 300 for everything!

 

MB Products one piece front end- Modified by KAIZENSPEED. Painted. Front attachment tabs and bar are attached. You would have to build your front end to fit it. $500
I can include the aluminum splitter too.




Carbon Fiber hatch with FAL Lexan rear window for EK. Fits 96-00 Civic hatchbacks. Latches to hold it down will be included. Saves over 25 pounds. $600

 

Few parts i have laying around..

Snow Performance Stage 1 Water/Methanol Injection Kit New Price $250
Comes with 2 Free bottles of Boost Juice
Slightly used, but comes with all components and some extra jets.
Like mentioned above it comes with 2 containers of boost juice. These are 30 bucks a piece normally. A $60 value for free.








Infiniti Q45 Throttle Body (90mm) ($65)
Of course it is used. This is in good working condition, but it is missing the throttle position sensor (tps). These go for 90 bucks and up on Ebay. Get it here cheaper







Greddy Intercooler SOLD
This is used, but its in good shape. Was used on my CRX.
Inlet & Outlet are 2.5 inches.
Intercooler dimensions i will have shortly





CV Products LS/Vtec Kit / Adaptor SOLD
New in the box never used. Comes with dowel pins and all.





B Series Log Manifold ($60)
I made this for my CRX years ago. T3 flanged, 38mm wastegate.. Its been lying around collecting dust.. im mean rust Good sturdy manifold though

 

ATS Carbon clutch (Single Pro Spec Type R) for b-series in excellent condition. $450 shipped with fedex tracking #.









This ATS carbon clutch (Single Pro Spec Type R) is retail at $ 1,418.94

 

first gen B16 head with dual valve springs and titanium retainers. Local shop said springs looked like ferrerra and retainers were supertech. I am
Unsure of exacty what they are but they held ITR cams at 9800 and pro2s at 9400 on my turbo car multiple passes (50-60)

Has one broken valve cover stud and one cam cap bolt hole is stripped.


$350 + shipping

Will include good obd 2 dizzy and ngk wires and gsr cams for $50 more

205-401-1433

 

Brand new precision 6262sp .82 a/r v-band comes with v band clamp and flange.
$850 shipped