WIlson Intake manifold for a GSR head. Setup for 8 injectors, 4 on top 4 on bottom! comes with both fuel rails that have been hard anodized black. THe manifold has also been anodized clear to prevent unwanted fingermarks! Has 3 push lock fittings for vacumm ports.

Thorttle body flange is setup for either WIlson or Mustang throttle body. also has npt ports on the top side of runners just incase you would like to run nitrous!

asking 1900 shipped!

 

Swift Premium Race springs 2.25" ID 7" long 60 mm.. Three set of different spring rates. The 20kg and 18kg are new but the 16kg has less than 500 miles on them. Great for upgrading your coilovers with stiffer rates for the track. $375 shipped for all 3 sets.

 

1. Bullseye Power S366 T4 Turbo
Honda/Acura T4 TURBO S366 - $900 OBO/ Trade for 72mm turbo

Bullseye S366 Turbo (Capable of upwards of 800hp) BIG POWER
.91AR
T4 flange
Vband exhaust
This turbo has been installed on my car and only started up to test for oil leaks...Other than that it is brand new....it has never seen any boost nor Dyno time. Wanting to
sale so I can get a S372 or a precision turbo of compatible size.

2. MSD 6AL ignition box with HVC coil-$150 OBO

3. have a D-series bare block and Transmission for spare parts. –Make offer

Prices do not include paypal fees or shipping fees, it is all negotiable though.

More pics upon request

Call/text for fast response: 620 262 7796 or send a PM

 

need some pics !

 

SOLD!

 

MSD Pro Billet Distributor complete setup.

Includes
MSD Distributor-8488
MSD Ignition Driver-6305
MSD Blaster SS coil
MSD plug wires

New over $800

Asking $450 obo

http://images.ibsrv.net/ibsrv/res/sr...attach/jpg.gif

 

For sale. 2 44mm tial wastegate, they come with 2 spring options! $250 each or both for $450firm . ITR cams $300 obo, 68mm edelbrock throttle body $150 obo. You can email for question RGRrodrigo@hotmail.com. Everything is plus shipping cost.

 

Used Pro drive spool....with speedo gear....300 shipped. B series GSR

 

1999 b16a2 vtec head. this head has 0 street miles and 8 pulls. the bottom end had issues so im parting it out. the head has just been freshened up. the head comes with the valve cover pictured and has -10an fittings welded to it. and stock b16a2 cams. theres no stripped holes!! CAMS and JOURNALS look brand new. head doesnt not have a lot of original miles and has NOT been rebuilt a million times like other heads for sale..this is a nice piece!

offers and questions welcome same day response.
im asking 450.00 shipped and i paypal fees.
call anytime 5757493103 rock

 

b16/typer victor intake manifold in great shape. it has been port matched and ported for 75mm tb bye tony palo at t1 race development. it comes with aem fuel rail and b@m fuel pressure regulator.

290.00 shipped for all of it!! throttle bracket included also.
i will sand blast intake for 15 dollars more

offers and questions welcome.
call anytime 5757493103 rocky

 

I'm selling my 90 Civic PRO ALLMOTOR Car rolling chassis,K-series ready, no motor, no electronics, cage is NHRA certified to go 8.50s, Skunk2 upper control arms, custom lower control arms, Penske front shocks, Strange Rear shocks, Kens Kustom whellie bars, Kens Kustom rear trailing arm with spindel mount Weld Wheels with M/T tires, Weld magnum front wheels 15by 8 with M/T tires 26/8.5/15, Custom one piece carbon fiber front end, Fiberglass doors, Custom Pro Stock wing and much more>>>>>
$5,000obo car is being sold as a rolling shell

Might Part out
hasport solid mounts $500
2 sets of driveshaft shop axels 3.9s with a set of hubs one set is barnd new still in the box $1600 obo
Six sigma race header with megaphone $1100 obo
Weld wheels painted black 15x8 with mt 15x8x26 they have 10passes on them $1100 obo
Rear Kens Kustom Trailing arm with Strange shocks 80lb springs and gold Weld wheels with almost new tires aerospace brakes and custom braided brake lines $3000 obo
Front penske shocks with resevoirs $800obo
Skunk2 upper control arms $150obo
Kens Kustom single wheel wheelie bars $700obo
Front lower control arms with custom solid bushing $120obo
Custom carbon fiber one piece front end $1200 obo
Franks Custom fiberglass doors modified window frame for ef complete with hardware doors need a lil work $600obo
pro stock wing $300
Bare chassis 8.50certified cage $1300obo
wilwood brake master with bracket $150
tilton clutch master cylender with pedal $180
buyer pays shipping

 

SOLD thanks HT

 

Up for sale K-series 62mm Magnesium Kinsler ITB's $1,900 picked up in Hesperia Ca. shipping is available at buyers expense. fuel rail was powered coated gloss black. TOP FEED, INJECTORS & THROTTLE CABLE ARE NOT INCLUDED. PM with questions. serious inquires only please. i will give specs to potential buyers.

 

hi im selling a brand new never installed Xcesive Manufacturing Bottom Mount Intake manifold it comes with all the hardware and a Q45 90mm throttle body valued at 100 bucks and optional velocity stack plate valued at 70 bucks...im asking $800OBO shipped





let me know if interested

 

2000 Integra 700+ hp
precision 6765sp turbo
Completely Built

$8500 firm

http://hondamarketplace.com/showthre...4#post44413494

 

sold....

 

5 gallon Jegs Aluminum fuel cell w/ foam and -8 male outlets, it has never been used however it does have scratches on it form test fitting and being around.

These are $139.00 new I would like to sell it for $80.00

I live in Broomfield CO, 80021




PM ME!

 

Not looking for any trades, PM me for offers thanks!



Borg Warner S372R with CompR wheel and race cover 1.44 exhaust housing twin scroll t4 flanged, fresh rebuilt. $1000.00
I made over 900whp with this turbo. (Turbo Only)



Intercooler piping and backdoor for EG/EK/DC chassis
$500.00



Neukin top mount t3 made for Borg Warner S362ett could use for other turbos has a 44mm wg flange welded onto it for B series.
Turbo and manifold combo for $1800.00



PIC Drag Coilovers $550.00 EG/EK/DC/EF



Borg Warner 362ett twinscroll t3 flanged, 1k use if that. $900.00 firm
Made 670 hp on this one.

 

password JDM 3 point strut bar used $200 92-2000 civic all models and also integras

new walbro 255LPH pump $90 92-00 civics and integras

used walbro 255LPH pump $65 92-00 civics and integras

new ATP Turbo intercooler blank end tanks suitable for custom setup, backdoor etc $ $65 each


new cx intercooler $150 universal


used threadstone tr10 intercooler $100 universal


integra type r rear seats for ek $200 will fit 96-00 civics maybe 92-95


civic type r door panels $200 96-00 civics
00 civic parcel shelf $50


vibrant mid muffler $85
[lmghttp://img836.imageshack.us/img836/8408/dsc02924d.jpg][/img]

stock ek seats $150

m/t skinnies 15/4.5/26 mounted never ran. $200


t67 turbo needs rebuild $500

the smaller one in the pic

2.5" aluminum vband clamp set 2 flanges and 1 clamp

Brand new OEM fuel tank straps 92-00 civic and integra

more **** too lazy to put up

 

K20 Omni 4 Bar $90 shipped
K20 ID 1000 Injectors $400 Shipped w/ clips no resistor box needed.


JDM Itr Clock delete In perfect condition. $20 Shipped

Auto Meter 2 5/8 Guages. Come w/ everting you see on them. $40 shipped each
Oil pressure
Water temp

5 Gallon RCI Fuel Cell $90 shipped New

 

2000 civic si shell 10 point cage cert went out last year has 84 crx aluminum drums with rear speed sensor carbon hood energy suspension bushing skunk2 camber kits front and rear i will leave the efi race harness in it for the wright price car is very light for an si with minimal cutting 2330lb with my 240lb *** in it $2500. dss3.9 axels with hubs $800. precision 6265bb $1400 long shifter with linkage like tony sells $725 old skunk retainers $25 mw pro14 $750 hasport solid mounts $250 inline pro t4 cast turbo manifold has 90ty welded to it $380 edelbrock victor x with 8 880cc injectors fuel rails and bbk 70mm throtlebody with vband $1000 rlz cnc b16 head new intake seats $1000 gsr block sleeved by z10 with 84mm 9to1 je pistons upgraded pins good crank ready to be put together machine work is done $1500

 

I planned to use this short block in my build but plans changed and I'm parting it all out. Motor is freshly built and ready to go. The pistons were used in a previous all motor build in which the rings got washed out before it was ever even broken in. They have carbon on the top but have idle time only. This bottom end is ready to make 800+ hp

Specs:

84mm Golden eagle sleeved OBD1 GSR block and crank

11:5.1 compression Arias pistons with upgraded HD wrist pins

Eagle Rods with upgraded L19 rod bolts

Brand new OEM oil pump

All brand new OEM bearing used in the bottom end fully spec'd out to have the best clearances

Golden eagle oil squirter block offs

Motor was assembled by Kevin Kempf fromt Speedfactory Racing

I have a build sheet showing all the specific clearances on everything

2400 obo







825HP Precision intercooler in perfect shape

Part # 053-1020

Dimensions are 34.5" L x 10.5" H x 3.5" D 2.75" in/out

425 obo

 

1999 b16a2 vtec head. this head has 0 street miles and 8 pulls. the bottom end had issues so im parting it out. the head has just been freshened up. the head comes with the valve cover pictured and has -10an fittings welded to it. and stock b16a2 cams. theres no stripped holes!! CAMS and JOURNALS look brand new. head doesnt not have a lot of original miles and has NOT been rebuilt a million times like other heads for sale..this is a nice piece!

offers and questions welcome same day response.
im asking 350.00 shipped and i paypal fees.
call anytime 5757493103 rock

 

PPG B-series gearset- $6000
20-25 passes

 

S372 with race cover and 1.25 exhaust housing $675.00 shipped

Brand New H22 SPEC Twin Disc clutch $975.00 shipped