Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.

I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.

The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.

The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.

Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.

I payed $2000 for the Pistons and rods.

For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.

I AM LOOKING TO GET $2500 O.B.O + SHIPPING AND PAYPAL FEES. NOTICE I SAID O.B.O(WHICH MEANS I AM WILLING TO LISTEN TO PRICES)

FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG][/IMG]












UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.











NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.











LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.

 

Fs: brand new precision 6766 its t4 and ball bearing 1.15 divided exhaust housing one year warranty 1600 obo
New Tempest racing B series forward facing divided manifold dual 44 gates 899
Can do a package deal 2100 picked up or 2150 shipped located in maryland any questions pm or text me 2402161030 thanks

 

Selling this AEM 30-1050 ECU (1.7) for 99/00 Civic

$700

 

ALL SOLD
Motec B-series setup. Ready to run. Everything is in mint condition.
Includes:
M800 (US spec) that has Advanced tuning, Lambda, 1mb logging enabled
Motec engine harness and cabin harness with Mil spec plug for firewall
Motec E888
ProDrag 4
Ignition harness with Mil spec plug for firewall
CBR coils
T1 coil hold down
Motec UTC
$8500 firm for everything!
Buyer flaked so it's back up for sale.

I also have the complete pinout for the harnesses, and original boxes that stuff came in from Motec. I will include a startup cal with the sale of the M800.

PM me with any info.
Chris

ALL SOLD

 

Selling for a friend a custom B series Myers Competition header. Asking $1000 obo buyer pays shipping and 4% PayPal fees unless you send it as a gift

Pm me or text me for inquiries 7184136348






Here is a dyno graph of what it made

 

3'' vband al flange and clamp 35

bnib t4 6766 1100

 

FS: Mil-spec Hondata CPR harness. Replace that bulky, electrical taped harness that they supply with the Hondata CPR kit. Also replaces the ugly blue colored K-series cop connectors.

All brand new connectors, pins, seals, etc. Raychem DR-25 heat shrink, Raychem adhesive shrink, Teflon coated Tefzel wiring, Deutsch quick disconnect connector and OBD1 distributor plug for a plug and play engine bay setup. Qty. 1 for sale in this configuration.

Price = $200 shipped in the states.

FS: GSR Cylinder head. Ported by Head Games. Fully built. Ferrera stainless valves, Supertech valve springs, Supertech Ti retainers. Built with bronze valve guides, OEM valve stem seals, new OEM LMAs, etc. Head was rewelded and ported in the water jacket near cylinder 1. Head was then resurfaced. Head has been used for six events. Normal wear on rockers and cam caps. Does not come with cams or valve cover or vtec solenoid/sensors, etc. Brad Penn oil run at all times. Any questions ask.

Price = $1200.00 shipped in the states

 

Skunk 2 - pro+ 3 camshafts only. For h22.

Perfect condition - like new.
Only ran 4 passes and a few dyno pulls. Purchased bnib from skunk. They were almost $800 after shipping. These will make GOOD power gains on stock valve 13:1 + all motor h22's.

Reason selling: too big for my compression setup.
Price: $520 shipped or best offer.
Location : NC 28086

Cam gears Not included.

Will trade for pro + 2's or jun 3's or similar spec cam.

 

Everything is brand new aside from long block.

have vouches if needed

Arias pistons for k24
part # 3330565
87.5mm bore
14.5:1 compression
$470

Eagle rods
k24a length
small end already machined to fit wrist pins
$330

k24a1 longblock
PPA head (sought after for having same ports as PRB head)
Separated head from block, otherwise it's complete.
$600

 

Mickey Thompson 24.5/9-13.

Great shape. Used 8 passes.

Looking for m&h in same size.

$320 + shipping .

Revn9k@hotmail.com for more pics or info.

 

All prices are + shipping and paypal fees.


Rolling shell-$10k non neg price! Don't ask! This is a crackhead price! 25.5 cert chassis, Progress custom coil over setup, custom front, shaved bay, custom flat paint by Goolsby customs, fiberglass tailgate, CCC spoiler, carbon hood, weld ...rear skinny's, Exospeed 15x9 fronts with 26x9 toyo's, Kirky seat, stroud window net, custom staging brake, stroud parachute, sumped tank, Mfactory LCA, and I don't know what else I'm forgetting. I also have enough carbon wrap to do the hood, tailgate, and rear diffusers. I will do that before it leaves here.








Chase Bays b series mil spec harness-$1000




Used Golden eagle B series head studs-$90


Used oversized flat bottom valves. sold

UPR billet intercooler water tank lid-SOLD


New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.


15 used Crower valve spring retainers. 1 missing for some reason.-$75


New MSD distributor cap for b series-SOLD

MSD HVC 2 coils. all but the blue one sold -$100


AEM fuel rail for b series with sample valve and SX regulator-$150


PWR radiator w/Spal fan for 92-95 civic-$150



Turbo smart 40mm wastegate-sold

Hks bov-$50


Unknown intercooler-$50


OG B series Spec twin disc clutch-SOLD





Intercooler water tank-$50



F22 drag turbo manifold-$50




B18C1 CNC race head for sale. This head was used in the BRE Hot Rod car, but has been reworked with a new valve job from CNC. It's all done, just needs to be professionally assembled. I know I would prefer it this way so everything can be confirmed to be correct during assembly. Valves, springs, and retainers are Ferrea. Comes with keepers, shims, and seal. All cam caps and oil rails included too. SOLD

Xenocron b series cam degree kit. SOLD

JG Edelbrock intake for B18c1 sold


BDL 70mm throttle body-$200



Weldon 2025 fuel pump with fresh rebuild from Weldon. Filters included-SOLD


MSD 75314 4cyl ignition box w traction control-$600



Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to mske it run for a long time. $1250 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.

__________________

 

BDL Cam gears 100$obo can come with REAL arp hardware for 130$

 

SOLD

Set of EFI Wizard 2000cc injectors, great shape, idle quality was pretty good. Car made over 800hp with no issues. Have only ran about 15gal of c16 through them. Need new 14mm O-rings for the top hats if they are being used. SOLD

 

USED K SERIES SKUNK2 VERSION 3 STAGE 1 CAMSHAFT $375 obo
USED BRMS ALUMINUM RADIATOR OVERFLOW TANK - $100 obo
BUYER PAYS SHIPPING AND PAYPAL FEES

 

Engine Block - Have most of paper work Shawn Ramey built and will vouch for $3000 for Shortblock no ati pulley $3500 with crank pulley $4500 for Longblock with everything
- 84.5 mm AEBS sleeves
-O- ringed
- turbo tuff rods
- 10:1 Weisco pistons
-golden eagle studs
- Golden eagle head gasket
- upgraded wrist pins
Golden eagle oil block offs
Complete GSR Head $
Gsr head which includes all of the following Fresh rebuild less than 200 miles on entire set up :
Ported and polished
Pro 1 cams
Skunk 2 valves spring and retainers

Ryan
804-536-3879

 

Remainder of my parts from my SFWD car...
http://hondamarketplace.com/showthread.php?t=3191574

 

706-346-6024
matt.stover@comcast.net

Clevite Race CB-1777HX ROD Bearing Sets(B Series):
$75 shipped

Clevite Race CB-1353H and HX ROD Bearing Sets(B Series, has oiling hole):
$75 shipped

FS: Forward Facing Manifold. one off manifold.
$650 Shipped OBO

**Option: I can have this thing ceramic coated FOR YOU for a non negotiable price.
$200 additional

706-346-6024

 

832-282-4959 jlvp79@hotmail.com
B20 piston JE 199888 84.5 bore 9.3:1 compression $400
65 mm throttle body $70

 

1988 Honda CRX drag car part out.

Crx drag shell includes fiberglass one piece front end, lexan windows, wheelie bars , roll cage , front traction bar setup , neusped drag coil springs, racing seat w/ harness , dash with tachometer and water temp gauge , parachute mount,handle and cable , and rolling chasis. $1200

Bosch 044 fuel pump with fittings
HKS super sequential blow off valve $150
turbo xs RFL blow off valve $150
GM 3 bar map sensor new $50
GM turbo solenoid for boost control
gt3076 turbo has damage to turbine wheel from engine failure 700177-5011 chra part number Best offer
Hasport B series hydro engine mounts for 88-91 civic crx includes timing belt bracket $200
Aeromotive fuel pressure regulator for boost $80
4403 autometer boost gauge $40
3301 autometer boost gauge $40

Any questions text or call 530-515-9268

 

ek shell w/ 56k original miles 10piont cage w/ window net setup two Kirkey seats with covers.. dash and panels died black gauge pods and fresh black carpet sumped tank with dual Bosch 044 fuel system compete race bushings throughout the suspension gsr front n rear disc with brembo rotors and green pads.. extended studs on front hubs skunk 2 camber kits front n rear seibon cf hood n visracing cf hatch fresh white paint flat black roof.. bay is shaved 4500 FIRM not looking taking any parts off what is listed is what is included for the price.. Whoever has saw in person can vouche for fresh *** car.. comes on steelies nothing is cut up or chopped up on car.. Has complete interior minus back seats due to cage..

NO TRADES!!!! For serious buyers plz text me 203-556-5676
I can send more clearer pics if interested!!!! Text with any additional questions!!

 

new M&W pro14 cdi box. purchased a few months ago, wired in and never ran the car. ended up changing to smart coils...

selling as a bulk package, and will include:
M&W pro14 box
complete harness
new in package harness plug w/pins and rubber grommets
8 coils-4cbr and 4gsxr

asking $750 OBRO

 

selling my 6.0L Bmc intake manifold bought it off of Armondo from ill garage's race car but is too big for my little 1.8 stock port head 62mm car...so i need to go smaller looking to get $900 plus shipping and paypal fees and you will get the intake manifold and rail and also a accufab 90mm tb with tps sensor and throttle cable bracket and jegs throttle cable works like oem and is adjustable if need be...intake is amazing has zero leaks or anything broken used it for about half a season...im located in chicago
thanks

 

ForSale--->> im selling a few things off my race car, prices are firm! Buyer pays shipping and paypal fees thanks! Robert 7022870150 call or text me for faster response

1.)speedfactory scha (shift change holder assembly) for use with a stock shifter (stiff spring) used but in great shape--->$old!!



2.)fluidampr street balancer bseries used in great shape (alt/ps)--->$OLD!!

3.)victor X intake manifold for b16 head with 70mm Erick's racing throttlebody used in great shape--->$450.00

 

Hi Guys I'm selling My B-Series Outlaw Water To air Setup it has been custom fabricated it is in excellent condition. This system is for water to air setup but intercooler can be replaced for Air to Air. I fabricated the setup a while back, but never ran it i decided to take it off and enter a different race class. These parts are in immaculate shape their is absolutely no problem with this. I only used it for mock ups after it was constructed car never even hit the Dyno on this set up. This setup is good for any Bracket car or Index car that wants to play and have fun, but if you want play with the big Dogs at Outlaw You can. I had these parts in my storage for too long now its time to sell it.

Includes:
1. (4) 3'' 16G charge pipes (Made to Fit a Fullrace top mount or similar Topmount)
2. 5 inch Water to Air Double core Intercooler 3'' outlets (Same DImension As most Air to Air so it can be replaced)
4. All T bolts Clamps and Cupplers Needed
5. Water To Air Ice Resevoir (Cold side Pipe Gets freezing cold also and it has a fuel cooler coil Built in that cools off the fuel right before it enters the FuelRail)
6. Water Pump for this setup
7. All Lines A/N-12 included
Asking Price $980 OBO. PayPal Ok.


Foward Facing Kooks Kustom Outlaw Manifold (material is SCH10 T4 Divided with 1/8NPT EGT bungs that can be plugged and chrome Ceramic coating. WG exit is divided and diameter for 60mm -with no flange or WGate)
Asking For $580 OBO

Please don't waste my time if you are not serious. I'm willing to ship at buyers expense I will send Requested Pics of any part to anyone who is serious in buying it My Email KVFAB.VP@GMAIL.COM, I rarely log on to HT check my inbox for quicker response you can always text me 201-494-1621 or call

PPG TRANS SOLDSOLDSOLD.....AEM version 2 EMS SOLDSOLDSOLD....DSS 5.9 Axles SOLDSOLDSOLD..