Contact :
Tony@facetuned.com
253-238-070zero
www.facetuned.com

Buyer covers PAYPAL fee's!!!


Complete MSD Ignition. Blaster II coil , Digital 6 , and OEM gsr distributor OBD2.

Asking $475 + shipping



Brand New ARP for B18C or ls/vtec or b20/vtec

Asking $110 + Shipping



Used Tial 50mm Bov Silver has a couple scratch's but nothing major.

Asking $150 + Shipping





B16/ITR Victor x Intake Manifold , 70mm throttle body , Golden eagle rail with FIC 1600cc injectors(low impedance).

Will not come with sensors, only whats listed.

Asking $450 + shipping





ITR VALVE COVER CUT

Asking $100 + shipping







MAC BOOST SOLENOID - specifically for use with boost by gear or wheel speed. aem , s300 , motec , ectune, neptune etc... whatever you got that supports it.

ASKING $45 SHIPPED I GOT ABOUT 6 OF THESE

 

*more pics coming soon..

We're not looking to trade for anything. Paypal accepted if you send as gift or add 3% to cover the fee. PLEASE E-MAIL US DIRECTLY AT SALES@CMRPARTS.COM FOR INQUIRIES. I MAY NOT SEE YOUR RESPONSE HERE.

--BMC pro billet with Moran motorsports 90mm throttlebody. Setup for 8 injectors on the bottom side. $2500.






--Tilton carbon/carbon clutches for b series honda. Two complete units available with hydro throw out bearings. The original 6lbs flywheels (now discontinued).

2 complete sets for sale. $3000 for each complete setup.

Also have a new carbon stack, cover and pressure plate. $2000, no flywheel.





--GSR longblock $12k each

GSR blocks with LA sleeves, JE big pin flat top pistons and GRP aluminum rods. All bells an whistles. LS crank with our standard race treatment. ACL race bearings throughout. Step deck and copper oring. Custom ARP head studs.

Cylinder head is a pro top line core, Berylium seats, steel guides, 6mm stem valves on both intake and exhaust. Chambers are pinned. All valvetrain is custom made for these heads and not hard to get. We have spares. All work on head was done by Brad at RLZ. Web pro series cams and rockers are the cam of choice. Engines have t1 trigger exhaust gear on them.

All misc stuff from cam seals, vtec block offs and breather fittings, Valve cover etc is included.

1 engine is brand new and 1 has a few hits. The one with a few hits was torn down completely and checked.

Price is not negotiable.









--Albins Trans and Nitro driveline for sale.

Albins gear stac. Liberty bell housing, brand new outter housing that was stress relieved and REM polished . Upgraded bearings through out transmission. Entire Gear stack was REM polished also. Speed factory shift mechanism. Every nut and bolt is brand new from honda.

Nitro driveline, brake rotors and pads are only 3 passes old. Also so are the wheel bearings. Axles are freshly checked out from rob Moore.

$12,500 takes the whole package. Will split for $10k for Trans and $3000 for driveline. This is the NO BS Non-Negotiable price. Not the haggle price.














--Lithium 16V pro battery kit... SOLD

 

Got Spinwerkes 15"x3.5" skinnies for sale
They are 5x114.3 Lug Pattern
Were just mounted but none were ever used.
They fit on my RSX and I'm sure they would fit and 06 and up SI along with an ITR probably.
Selling because I decided to change up my wheels
$500 OBO, Will ship at buyers expense.
Message me on here as I check frequently. Thanks

 

PM me if interested. Accepting offers on all items....

Custom 3 inch intake with velocity stack-Make offer



Various SS lines and fittings-Make offer


Hybrid Racing shift cables-$225









Jazz 1 gallon fuel cell w/foam-$50
(Was left outside for a long period of time which is the reason it has some of the marks inside the cap, but it should work fine)





DSS 2.9 axles for K20 in a crx with K20a half shaft-$350


Six Sigma Racing 4-2-1 K20 in a Crx header-$750
(One runner has a minor bend in it, it shouldn't affect performance that much)





Aeromotive in-line fuel filter casing (used) w/ brand new 10 micron replacement fuel filter & -10AN fittings-$75


Aeromotive A1000 fuel pump w/ -10AN fittings (new, only mounted. Has some scratches from mounting)-$310


Autometer 3 3/4 in. electronic tachometer- $120



Autometer 2 1/16 in. mechanical water temp gauge w/ 12ft. tubing- $70



Autometer 2 1/16 in. volt meter- $30

 

FOR SALE:
Mission Critical Peformance CNC ported F20C head, all supertech components. what you see in the picture is what you get. $1550 obo shipped and buyer pays paypal fees

 

used fcs race 5 gallon fuel cell off the grey car. -10 feeds and -8 return. comes with new straps and hardware
350.00 mint cond.



msd blue coil mint cond. comes with coil wire.
100.00



turbosmart hyper 45mm gates. got 2 of them off the grey car. in very good condition. comes with 8lb and 14 lb springs and all the fire rings, and new flanges to weld. i have 2 of them.
300.00 ea.




place racing b series crx civic 88-91 mount kit. used in very good condition
80.00


fcs race battery location fuel cell never used but light surface scratches.
275.00


fuel cap plastic new.
30.00 shipped


borg warner airwerks s400sx 72mm turbo.
specifications: ported housing, 72mm inducer extended tip technology, new inconel 87mm/83mm ti wheel modified 1.25 a/r housing est 1.30 a/r
hyrdo dynamic bearings
1900.00 new.


all items are first come first serve.
paypal is info@fcsfab.com
all items are used unless specified.

for quicker response please email info@fcsfab.com

 

Selling for a friend B series Comp Stage 5 clutch less than 100 miles on it. He switched over to a twin disc and is shooting for more power than a single stage 5 will hold. $225 plus shipping and ebay fee's PM me or txt 203-410-2574

 

percy Lexan full kit for 96-00 Ek full kit including windshield. Include install kit with hardware, Paid $1500 make offer
glass is in original package never opened.
Full race forward facing mani new $950

Golden eagle pro fuel rail new in box $100

Willwood big brake kit, comes with dril rotors dual piston calipers, pads all bolts new in box $500

Aem 1040 used but in mint cond $500

bloxs toda spec b cams new in the box $300

Arp main studs $100

pr3 pistons new in the box $150

Aem fuel rail used $90

Auto meter 11,000 rpm tack with mini programable shift light silver face $180

100lb spring for any shocks $100

bosh 1600cc injector (rail need to be drilled out or buy adapter from
xenacron

waterman fuel filters I have 6 -6 and 4 -8

pic will be up soon. price neg but not giving for free.

 

I'm posting this for a friend, so please contact him with any questions.

Name: Alex G.
Location: Indy
Contact: alexgonz@iupui.edu (317.362.5even5four)
Price: $275 OBO SHIPPED
Literally a BRAND NEW Precision Turbo & Engine 46mm wastegate (black). Box was opened to verify that everything was there.

Pictures here.
http://s110.photobucket.com/user/liq...44999073073466

 

FS chase bays master cylinder plate used $75 obo

 

Up for sale is a used K20A2 block and head. I bought the block with intention of using the cylinder head only. Since then, I sold all of my Honda **** ad I no longer have use for this.

At the time of purchase, I was told that the bottom end was KNOCKING.

I don't know how they came to that conclusion, nor did I inspect the block. The pistons and cylinder walls look okay from a quick visual inspection. I don't have the time to check for the damage, so it's being sold AS IS.

The cylinder head is in good condition.

For the block (Block, crank, main girdle, pistons, rods, oil pan, water pump, oil cooler) $360

For the cylinder head (Head, cam caps, valve springs, valve cover, cam gears, red 2.0L iVTEC cover) $420

Prices DO NOT INCLUDE SHIPPING!!
I'm willing to ship if you're willing to spend the coin.



























I also have this Accord 5-speed tranny. I'm selling this for $120







Text me with ofers at 845-549-39-ONE-FIVE

Or PM me here.

DISCOUNT WILL BE GIVEN IF YOU BUY ALL OF THE ****!!

 

Name: Andrew Moore
Location: North Beach, MD
Means of contact: Email-yzracer323@aol.com
Price: $varies

Shipping is available(Buyer pays shipping and Paypal fees.)

2x, Mac boost by gear solenoids $40/ea

Autometer Boost and Oil press $40/ea


Victor-X Intake Manifold, #4760/GSR, $195


Hondata IM Gasket, GSR $20


Personal Steering wheel, with NRG quick release(black suede/red stitching) $225


NRG short hub(EG/DC) $75

BWR B-Series 5th gear cuff, NEW $175


BWR/Cometic 81mm LS VTEC conversion kit, includes everything: gasket, sandwich plate, hose, dowels, fittings/plugs $155


BWR 'Black Series' Aluminum Radiator, 92-00 Civic, Unopened $145

Stock photo

 

Name: Norman
Location: Gloucester, VA
Means of contact: Text 7573429549
Price: $4500

Engine has roughly 3000 miles, doesn't leak, smoke tick, knock or anything. Never overheated.
Made 651whp on this block on a 6262 on e85. Only reason I am selling is that I don't need that much power anymore.
This block was sleeved and assembled by CNC Engine Dynamics. I have the spec sheet and receipts.

B18a block:
Darton MID sleeves
O ringed
84mm Manley pistons w/ upgraded wrist pins
Manley "Turbo Tuff" rods.
ACL race bearings
Golden eagle main studs and main girdle
Type r oil pump
Golden Eagle Oil line kit
Morosi oil pan
Ati street damper

All beginning pictures are with 0 miles, I pulled the head off the other night and snapped the final picture. No signs of detonation or anything. Motor was in great running condition.

Pictures:














Turbo Kit:
Price: $2000

Description:
For sale is my 6262 t4 turbo kit. I made 651whp on 32psi on this kit, just decided I don't need that much power anymore.

The kit consists of:
Top speed performance ram horn
Precision pw46 gate
Tial q46 blow off valve
Precision 6262 journal bearing t4 .68 ar (also have a t4 .58 ar housing)
3" v banded down pipe(heat wrapped)
Wastegate dump tube
Backdoor inter cooler with 3" cold side piping
3" v banded pipe with glasspack muffler.
All oil lines and gaskets
Xenocron turbo screen
Pictures:

 

I have for sale a freshly rebuilt and flow tested Weldon 2025 fuel pump with an extra base. Pump currently has the -8an inlet and outlet, I will include the base to convert it to -12 inlet and -10 outlet. This pump is capable of supporting 1400 hp! Kinsler did the rebuild (Weldon referred me to them since their lead time for rebuilds wass a few months). Will also include all flow and rebuild paperwork.
Asking $550 via paypal, shipped to the continental 48, all others pm me for price.

Also have a brand new never used Golan 10 micron fuel filter (-8an in and out) perfect for e85!
Asking $70 via paypal, shipped to the continental 48, all other pm for price.
Also have a brand new never used 2 bolt b series motor mount. Has U70A race insert.
Asking $110 via paypal, shipped to the continental 48, all other pm for price.

 

F/s MFactory Final drive 4.92 for B16 first gen cable trans Y1,S1 (non YS1) like a new only 4 months ran. $200 paypal ready!! *I have problem to upload photos here. Pm

 

Paypal payment only. Shipping and advertised prices are negotiable. For FASTEST response please call/text 501-908-2973

(2) sets of DSS 5.9 axles for eg/dc with a B series trans. $1300 for one set with the knuckles, hubs and intermediate shaft. $1000 for one set of axles ONLY.



NLR AMS 1000 boost controller setup $650




Manely turbo tuff rods for GS-R stroke. Used but in great condition $600



Toda Adjustable cam gears $175



Darton MID sleeved B18C block. bore is currently at 85mm. Has GE oil squirter block off plugs and GE main studs. Also comes with Moroso 5.5qt oil pan, new ITR oil pump, -10 AN breather ports, and your choice of a LS OR GS-R crankshaft. -$1100



B series transmission scatter shield -$100

tial 38mm 1 bar spring $20



(2) Vafc 2 vtec controllers- $75 each $125 for both



JG edlebrock Victor X intake manifold for B18c1 cylinder head. Ported by Endyn and throttle body hole opened to 70mm.



Buddy Club stage 3 camshafts with adjustable cam gears $300

 

I have a set of FIC low impedence 1650cc injectors in great working condition cleaned and tested. Precision 750 HP Intercooler with no leaks and has been pressured tested. Used MSD Digital SCI in working condition.

FIC 1650cc Injectors supports Q16 $ 315.00 shipped
Precision 750 HP Intercooler with taped -an fitting for boost source 330 Shipped
MSD Digital SCI $90 Shipped
B16/B18 Vtec valve cover powered silver vein with tapped -8an 80 Shipped

 

Hello HT,

I am selling my used 85mm Golden Eagle Sleeved B18B1 bare block. Over last winter we had pulled everything apart for inspection and found that Cylinder (1) and Cylinder (4) had slight piston scuff (can’t tell anything on the block what so ever). After taking the block to our local machine shop we were advised that it would need to be bored to an 85.5 or 86mm. I had decided to go ahead and sleeve a new block (83mm) due to being a forced induction car. This block would be great for an ALL MOTOR build of some sort.

Pictures as follows:











What you see is what you get!

Price: $525.00 shipped in the 48. Add 3% for PayPal fees.

Contact: Tyler @ 1-541-570-5071

Thank you!

 

Location: Macungie, PA
MSD Digital 6 -- $200


Twin Fire with CBR coils -- $350


Fluidyne radiator $150


Kill Switch Setup (what you see is what you get)

 

I had this built by Go-Autoworks, its their GT-1000 FMIC single backdoor, side exit cold side, 3 inch inlet and 3 inch outlet it has a 1000HP Garrett Core, 12x24x4'', Its never been mounted, still in the bubble wrap it was shipped in, I paid almost a thousand shipping and all, they sell them for $889 + shipping, I need it gone ASAP....make me an offer...No low ball offers please...This is Brand new.....Feel Free to PM me...I am flexible...

http://www.go-autoworks-store.com/gogtrain2.html

 

Name: Carlos

Location: Richmond VA area

Contact: PM or txt 804-687-7125 or email Info@momentum-autoworks.com

Trades: Glock 19, glock 23, nice handguns, cash, large frame t4 turbo, cash, fcs 5 gal fuel cell, Skunk2 Pro1 cams for B series, B series built trans or hardened gears for gsr/itr trans, cash, etc.

I will ship and accept paypal but prices do not inclue shipping or paypal fees.

-JDL K series T3 sidewinder manifold with 44mm gate flange fully ported. $900

-Tial 44mm MVR Wastegate $325



-Precision 62/62 Ball Bearing Turbo with 2 dyno sessions and a no more than 500 miles. Has a vibrant 90 bend welded on. I also have a precision race compressor housing with a straight outlet I can swap or include for $100 more. This turbo has no issues at all and is in perfect working order. $1000







-B Series Custom made T3 top mount manifold with 44mm wastegate flange. I have made 450+ hp on this manifold several times with no issues. Manifold has no cracks or issues. This will come with a godspeed t70 turbo, godspeed 44mm wastegate and 3" downpipe with flex. $500

 

MSD digital 6 $185 shipped sold
MSD pro billet distributor with coil driver and blaster SC/SS coil, and wires $450 shipped
MSD HVC coil $120 shipped sold
Hondata S300 V1 with ECU with PWM components $600 shipped sold
Fastline road race shifter used, **** not included pic is of new item $170


ARP B series Flywheel bolts $50 shipped.


Summit racing 5 gal fuel cel. $120 shipped

 

Some left over parts I have for sale. Please make reasonable offers.
Pm me or call/text me if you have any questions or need more pictures. 706-627-9865
***All parts are new, unless noted***

- Fuel Lab 10 Micron Post-Pump Filter $85 OBO
- Earl 85 Micron Fuel Pre-Pump Filter $70 OBO
- Downstar Inc Clutch Line Fittings $10 OBO
- Russel Fuel Pressure Gauge 650320 $30 OBO
- KS Tuned Kaizenspeed Manual Timing Belt Tensioner $115 OBO

- RCi Seat Belt Harness 9210D $60 OBO
- Golden Eagle Sandwich Plate Kit $75 OBO
- Taylor 1032 Battery Cut Off Disconnect Switch $25 OBO

- Avid Pro Series Sold EG DC Mounts $250 OBO

- B-series Vtec Valve Cover w/ Spark Plug Cover Make an offer
- Omni 5 Bar Map Sensor $85 OBO
- Vibrant 3" Silicon Couplers $10 OBO

- Vibrant Performance Intercooler Core 12832 $225 OBO

- Golden Eagle K20 K24 K-series Fuel Rail Black $80 OBO
- GSR Transmission mFactory LSD & Carbon Syncrhos installed by Aquafina $1000 OBO
- Lenso Drag Wheels Slicks & Skinnies Gold $800 OBO

 

hey ht just changing my setup up alittle and selling some parts. please text me 814 937 12three four. if you pm me it may take a few days for me to get back to you.

RLZ h22 head with 500 miles. has stock size valves in it with crower springs and retainers. ran pro3s with no problems. $1550



H23 crank had the counter weights taken off. weighs 11lbs less than stock. also is balanced. $350


H22 wiseco pistons. 89mm bore 11.5 to 1 cr. brand new never used come with rings, wrist pins, and locks $350

 

FOR SALE FROT FACE EXHAUST MANIFOLD COMPLETE KIT FROM MY RACE CAR
EVERUTHING INCLUDED//

44MM WATEGATES
4 INCH DOWNPIPE
DUMP TUBES
EGT'S BUNGS
02 SENSORS BUNGS
S
ASKING PRICE $850.00

FOR SALE 7280R PRECISION TURBO
IN GOOD CONDITION $2000.00