August FS Thread
#1
August FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#3
Honda-Tech Member
Re: August FS Thread
Up for sale is this Edlebrock 65mm throttle body part number EDL- 4790. Asking 150.00 and will ship in a flat rate box for free, Please include paypal fee. The throttle body is in perfect working condition and the TPS does come with it.
#4
Honda-Tech Member
#5
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2001
Location: Somewhere withing the 5 boroughs, NY, USA
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
Custom B series T4 38mm flange divided bottom mount manifold. Great quality, great weld and awesome all together. Will come with two dumptubes. Only reason I am selling because I chose a top mount instead. Asking $700
Only trade I would accept is AEM V2 6050 or 6040.
Pm me or text (718) 413-6348
Only trade I would accept is AEM V2 6050 or 6040.
Pm me or text (718) 413-6348
#6
Honda-Tech Member
Join Date: Aug 2004
Location: 253, WA, USA
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
I have for sale our backup 2.7L all motor shortblock. We wont be using this so we decided to sell it. The shortblock is already assembled and contains:
Golden Eagle sleeved
Sony Bryant 106mm Billet crank
Arias 90mm pistons, 15:1
GRP Aluminum rods
ACL race bearings
Looking to get $5000 for the shortblock. Parts alone are worth more. This shortblock has never been run and all the parts except the Sonny Bryant crank are brand new. The crank was run all last season and this is the same setup we had last year that went 10.08.
Golden Eagle sleeved
Sony Bryant 106mm Billet crank
Arias 90mm pistons, 15:1
GRP Aluminum rods
ACL race bearings
Looking to get $5000 for the shortblock. Parts alone are worth more. This shortblock has never been run and all the parts except the Sonny Bryant crank are brand new. The crank was run all last season and this is the same setup we had last year that went 10.08.
#7
Honda-Tech Member
iTrader: (3)
Re: August FS Thread
I have for sale my fully built motor
Motor was fully built and tuned by Speedfactory Racing in University Place, WA
Willing to ship at buyer's expense
Engineblock:
Golden Eagle sleeved B18C1
84.5mmArias Pistons
10.5.1 BME Aluminum Rods
ACL bearings Calico Coated Rod Bearings
Short block $2500 obo
Stock port GSR head
Complete Ferrea Valvetrain
Ferrea 6000 Seres Valves
Ferrea dual valvesprings & retainers
$1000 obo
Blox 68mm TB-100
ATI Super Damper-250
Precision CEA 67/68 HPQ precision turbo 1.15ar divded housing*
DSS 5.9 axles no hubs -850
67/68 HPQ precision turbo 1.15ar divided housing-900
Text for fastest response 253 777 7341
Motor was fully built and tuned by Speedfactory Racing in University Place, WA
Willing to ship at buyer's expense
Engineblock:
Golden Eagle sleeved B18C1
84.5mmArias Pistons
10.5.1 BME Aluminum Rods
ACL bearings Calico Coated Rod Bearings
Short block $2500 obo
Stock port GSR head
Complete Ferrea Valvetrain
Ferrea 6000 Seres Valves
Ferrea dual valvesprings & retainers
$1000 obo
Blox 68mm TB-100
ATI Super Damper-250
Precision CEA 67/68 HPQ precision turbo 1.15ar divded housing*
DSS 5.9 axles no hubs -850
67/68 HPQ precision turbo 1.15ar divided housing-900
Text for fastest response 253 777 7341
Last edited by tmar253; 08-19-2013 at 10:06 AM.
Trending Topics
#10
Honda-Tech Member
iTrader: (3)
Join Date: Nov 2003
Location: OC, Ca USA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
GSR Eagle Rods ARP 2000 bolt USED **SOLD**
Skunk Tuner 2 Cams with Cam gears $500 obo USED
BDL 72mm TB, Speed factory 4 Bar map, Tps $280 obo USED
JG B16 Intake Manifold, Wrinkle black $200 USED
Vibrant Van jean Clamp 3" Complete $80 NEW
Hondata p28 Ecu boost options **SOLD
Hondata CPR kit $350 (Payment Pending)
Rywire Mil-spec Tucked B-series Harness, 1 piece OBD1, ID2000 injector clip,(have ID1000 clips also) With Cabin Harness $500 ($639 Reg price) http://www.rywire.com/catalog/shopping_cart.php **SOLD**
Griffin Intercooler core with endtanks 35x10.5x3 and charge pipe for EG/DC and tial 50mm bov flange *SOLD**
2200cc Injectors **SOLD**
MagnaFuel 4703 FuelPump **SOLD**
If you want more pics text me... 714-388-7303 TEXT ME TEXT ME TEXT ME
Text me for the fastest response..... PM me on HT for the Slowest response cuz I don't really log onto HT...
Skunk Tuner 2 Cams with Cam gears $500 obo USED
BDL 72mm TB, Speed factory 4 Bar map, Tps $280 obo USED
JG B16 Intake Manifold, Wrinkle black $200 USED
Vibrant Van jean Clamp 3" Complete $80 NEW
Hondata p28 Ecu boost options **SOLD
Hondata CPR kit $350 (Payment Pending)
Rywire Mil-spec Tucked B-series Harness, 1 piece OBD1, ID2000 injector clip,(have ID1000 clips also) With Cabin Harness $500 ($639 Reg price) http://www.rywire.com/catalog/shopping_cart.php **SOLD**
Griffin Intercooler core with endtanks 35x10.5x3 and charge pipe for EG/DC and tial 50mm bov flange *SOLD**
2200cc Injectors **SOLD**
MagnaFuel 4703 FuelPump **SOLD**
If you want more pics text me... 714-388-7303 TEXT ME TEXT ME TEXT ME
Text me for the fastest response..... PM me on HT for the Slowest response cuz I don't really log onto HT...
Last edited by Almtrhb; 08-19-2013 at 05:16 PM.
#12
Honda-Tech Member
Re: August FS Thread
706-346-6024
matt.stover@comcast.net
MSD Digital 6: $200 Shipped
MSD Blaster SS Coils: $30 Shipped EACH, $50 for Both
Aeromotive Pro Pump - $525(On Hold until November)
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
-Friend purchased it and then shipped out to Japan in the USAF...
With 4" SS Downpipe
Flanged for 60mm Tial
$875.00 OBO!!
matt.stover@comcast.net
MSD Digital 6: $200 Shipped
MSD Blaster SS Coils: $30 Shipped EACH, $50 for Both
Aeromotive Pro Pump - $525(On Hold until November)
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
-Friend purchased it and then shipped out to Japan in the USAF...
With 4" SS Downpipe
Flanged for 60mm Tial
$875.00 OBO!!
Last edited by SPOOLINmatt; 08-26-2013 at 06:08 PM.
#13
Honda-Tech Member
Join Date: Sep 2007
Location: NJ
Posts: 1,739
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
Neptune RTP inside a P28 with PWM components, 2 0-5V inputs, 0-5V o2 sensor mod, and have serial code for neptune program. $450
Jdm H22A Type S with LSD tranny $550
Jdm H22a Type S longblock $1800
Hydro GSR tranny, No grinds, No popouts, was just gone over and have pictures to verify condition. $500 or trade for hydro B16.
Jdm H22A Type S with LSD tranny $550
Jdm H22a Type S longblock $1800
Hydro GSR tranny, No grinds, No popouts, was just gone over and have pictures to verify condition. $500 or trade for hydro B16.
#14
Honda-Tech Member
iTrader: (2)
Join Date: Aug 2008
Location: Concord, NH, united states
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
I'm selling my 1991 Acura Integra LS. It has a weld in ten point cage, Lighter/Faster sunroof plug, VIS carbon fiber hood, ETD tracking bar, Skunk2 drag coilovers, sumped tank, and relocated battery. It has the factory dash, door panels and head liner. It doesn't have seat, heat or a/c behind dash, gauge cluster, steering wheel, or fuel system.. Asking $800. I check my pm's often or you can text me at (603) 724 0164. Bobby
Last edited by TegraGSXR; 08-27-2013 at 02:50 PM.
#16
Honda-Tech Member
iTrader: (1)
Re: August FS Thread
Need to clear some stuff up to get ready for west coast nationals in bakerfield ca next month so here is some stuff for sale
1- evolution h2b bracket new never used $25
2-aem series 1 obd1 $400
3-h23 50 main cryo treated crank no spun bearings $150
4-h22 I-BEAM small bolt rods $150
5- brake booster delete for eg/DC with WILWOOD 3/4 master cyl with QSD DELETE PLATE $120 NEW!!!!!
6-h22 SKUNK2 PRO2 cams used $400
7-MYERS COMPETITION HEADER WITH 3"vband$900
8-oem bseries flywheels $10 each
9-h22 crower springs and retainers used $100
More to come such as QSD H2b kit and products
1- evolution h2b bracket new never used $25
2-aem series 1 obd1 $400
3-h23 50 main cryo treated crank no spun bearings $150
4-h22 I-BEAM small bolt rods $150
5- brake booster delete for eg/DC with WILWOOD 3/4 master cyl with QSD DELETE PLATE $120 NEW!!!!!
6-h22 SKUNK2 PRO2 cams used $400
7-MYERS COMPETITION HEADER WITH 3"vband$900
8-oem bseries flywheels $10 each
9-h22 crower springs and retainers used $100
More to come such as QSD H2b kit and products
#17
Honda-Tech Member
Join Date: Mar 2007
Location: Mission, Bc, canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
D16 - Competition Clutch Stage 4 - Sprung 6 Puck
Used 1500km, properly broken in, no track use
$200 + Shipping (Paypal verified)
BWR D16 Ramhorn
Nearly brand new T3 manifold with a 38mm wastegate flange.
Used for 1000miles, before setup was parted out.
The bad.. 2 of the bolts seized. Tried to have them drilled out to no avail. I can either leave it how it is, with the drill hole threw the bolt, OR completely drill it out, and a longer bolt + lock washer will be needed.
$375 + shipping
Used 1500km, properly broken in, no track use
$200 + Shipping (Paypal verified)
BWR D16 Ramhorn
Nearly brand new T3 manifold with a 38mm wastegate flange.
Used for 1000miles, before setup was parted out.
The bad.. 2 of the bolts seized. Tried to have them drilled out to no avail. I can either leave it how it is, with the drill hole threw the bolt, OR completely drill it out, and a longer bolt + lock washer will be needed.
$375 + shipping
#18
Honda-Tech Member
Join Date: Jul 2002
Location: Los Angeles, CA, USA
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
H22 Turbo Manifold - $700
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe and dumptube as well.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $1000
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $600
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe and dumptube as well.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $1000
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $600
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
#19
Re: August FS Thread
72mm GT42R ball bearing 1.15A/R still usable needs new exhaust wheel or rebuilt $1200obo
AEM PN:30-1060 OBD II brand new never used $600
Skunk2 Racing B-series radiator hose kit like new $80
Skunk2 Racing billet vtec solenoid like new $80
MSD coil p/n8253 $80
Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160
Used Moroso battery box only $75
Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320
M&H 26x8.5x15 Slicks ONLY like new $275
AEM PN:30-1060 OBD II brand new never used $600
Skunk2 Racing B-series radiator hose kit like new $80
Skunk2 Racing billet vtec solenoid like new $80
MSD coil p/n8253 $80
Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160
Used Moroso battery box only $75
Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320
M&H 26x8.5x15 Slicks ONLY like new $275
#20
Full-Race topmount/dp
Full-Race topmount and down pipe combo forsale. Was purchased off from a member in this section but plans and priorities have changed. T4 divided, dual 44mm gate and the row pipe is 3"-4" with vbands on each end. $900+shipping.
#21
Honda-Tech Member
Join Date: Oct 2010
Location: lake anna, Va
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
selling my true street build
92 civic dx shell
10pt molly cage with chute
sparco seat
omni suspension
traction bar
sumped fuel tank with all fuel lines ran
k-series stuff for build:
afi side winder manifold with down pipe and dump pipe 1300$
precision 6266bb turbo 1000$
custom je pistons and brian crower rods 1000$
super tech valve springs and retainers 200$
avid solid k-series motor mounts 250$
also have 0bd2 hondata s300 for sale 400$
take everything together for 4500$
call, text, or pm sam (801) 636-1943
i can send pictures of everything if you ask
92 civic dx shell
10pt molly cage with chute
sparco seat
omni suspension
traction bar
sumped fuel tank with all fuel lines ran
k-series stuff for build:
afi side winder manifold with down pipe and dump pipe 1300$
precision 6266bb turbo 1000$
custom je pistons and brian crower rods 1000$
super tech valve springs and retainers 200$
avid solid k-series motor mounts 250$
also have 0bd2 hondata s300 for sale 400$
take everything together for 4500$
call, text, or pm sam (801) 636-1943
i can send pictures of everything if you ask
#22
Re: August FS Thread
91 CRX HF drag shell. Original body and paint with absolutely NO RUST! Custom hand bent 10pt cage by Tom at Fabrications Unlimited. Cage is complete with door swing outs and a removable parachute bar with cable. Everything is tig welded and good for 8.50s. Up front there is a Vibrant 875hp intercooler with custom 3 inch piping, all covered by a urethane wings west bumper (intercooler is too big for stock bumper). 4 wheel disc brakes and camber kit up front. Full interior is present even with full cage, only thing missing is the front seats. There is a Kirkey that comes with it. I have all tail lights and dent free panels so this is a complete roller. Simply drop in your swap of choice and race. All electrical harnesses are included. Located just outside of Baltimore, MD. $2000 Cash. NO TRADES. There is 3k worth of cage work alone!
Last edited by boostedhfrex; 08-22-2013 at 03:08 PM.
#23
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2008
Location: Clifton, nj
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
2 sets of drive shaft shop pro level axel with diff
one has a brand new wavetrack lsd and mid shaft its new too
the other set comes with a quaife
located in south NJ
862-596-4279 during business hour only
one has a brand new wavetrack lsd and mid shaft its new too
the other set comes with a quaife
located in south NJ
862-596-4279 during business hour only
#24
Honda-Tech Member
Join Date: Mar 2011
Location: Phoenix, AZ
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: August FS Thread
Dual Bosch 044 fuel pumps with MB racing dual pump brackets. One pump has inlet and outlet fittings....$350 shipped.
FAST wideband controller w/ sensor....$100 shipped
Borg Warner S400SX turbo. T4 1.25 A/R exhaust housing. Black ceramic coating. Polished compressor housing. 71mm compressor. 3" compressor outlet. 4" turbine housing outlet. $850
FAST wideband controller w/ sensor....$100 shipped
Borg Warner S400SX turbo. T4 1.25 A/R exhaust housing. Black ceramic coating. Polished compressor housing. 71mm compressor. 3" compressor outlet. 4" turbine housing outlet. $850
Last edited by TeagueSpeed; 08-30-2013 at 07:29 PM.
#25
Honda-Tech Member
Re: August FS Thread
Email Address/Phone Number- 316-806-8992 OR PM
Zip Code: 67213
Name: Jeff
Descriptionarting out my 2g AWD drag car, mostly all is new and all top quality parts. All prices does not include fees or shipping
AEM Cam gears, $150
Summit brake pump for staging with auto trans- $250
Mishimoto oil sandwich plate adapter, with fitting for oil coolers etc. $75
Moroso 6 bolt alunimun oil pan with x capicity and block studs. $500
Power Division balance shaft delete kit.- $160
Frontline FAB rear diff cover and brace -
ID 1000 injectors -$400
ID 2000 injectors -$850
2 Aeromotive fuel rails - $150 each
GRP Aluminum rods for 94mm crank with bearings - $700
AMS 7 liter intake manifold with Accufab 75mm TB - $850
With NOS direct post system designed around this manifold - $1350
NOS direct port system alone -$550
Custom CP pistons 10:1 with cp groove and upgrade pins -$650
Concrete 6 bolt block never ran, pic upon request! - $450
AMS deck/torque plate -$300
Eagle 94mm crank - $500
Kiggly 6 bolt in a 2G SFI flex plate - $280
Kiggly 12 tooth crank trigger kit -$200
Kiggly HLA pressure reg - $125
Kiggly main girdle - $100
Tial 50mm BOV -$225
Precision Billet Torque converter -$750
Misc Vibrant van jan clamps 3'', first come first serve -$75 each
Power division Zero tick lifers -$150
EVO 8 Rockers - $150
<a href="http://s1197.photobucket.com/user/85mmek9/media/047_zps1c900c44.jpg.html" target="_blank"><img src="http://i1197.photobucket.com/albums/aa437/85mmek9/047_zps1c900c44.jpg" border="0" alt=" photo 047_zps1c900c44.jpg"/></a>
Built 6 bolt head, all set up with super tech valve train and Ferrea locks! Patterson Racing port work and mission critical control valve job and blend work and assembly! The valve train is set up for the big Kelford cams I have for sale.
$1250
Kelford Cams (big) -$ 500
Garrett core, 24x12.1x4.5 -$300
2 weld RTS 15x8 wheels with MH 26x10x15 DOT slick, I have all 4 slicks. $625
1999 Eclipse with 50k orginal miles! Sibon carbon trunk and hatch, the hatch still needs lexan or glass installed. New 10 point cage, chute and net all done by Riffle Motorsports in Newton KS, also a custom 10.5 outlaw wind was built and installed, one off! Paint was custom done 5 years ago and is still in great shape! Car is set up for the track but if you wanted to you could also street the car. Moly front lower rad bar for weight and clearancing, Kirky drag seat with custom moly mounts, NRG steering wheel and quick release. 8 Gallon fuel cell with -10 feed and -8 return all up to meth standards. There is a mount in the back for a magnafuel pump ready to go. I can clean up and take more pics if someone is interested, I must sell because I have to put more important things in life first for once . with some polished eagle wheels $4800 OBO or trade maybe. 3-4 years ago the car was going 9.3-9.4 at 149ish on a much weaker set up on pretty low boost. I do have all the lights, center consol and front part interior of the car.
And back in the day
Zip Code: 67213
Name: Jeff
Descriptionarting out my 2g AWD drag car, mostly all is new and all top quality parts. All prices does not include fees or shipping
AEM Cam gears, $150
Summit brake pump for staging with auto trans- $250
Mishimoto oil sandwich plate adapter, with fitting for oil coolers etc. $75
Moroso 6 bolt alunimun oil pan with x capicity and block studs. $500
Power Division balance shaft delete kit.- $160
Frontline FAB rear diff cover and brace -
ID 1000 injectors -$400
ID 2000 injectors -$850
2 Aeromotive fuel rails - $150 each
GRP Aluminum rods for 94mm crank with bearings - $700
AMS 7 liter intake manifold with Accufab 75mm TB - $850
With NOS direct post system designed around this manifold - $1350
NOS direct port system alone -$550
Custom CP pistons 10:1 with cp groove and upgrade pins -$650
Concrete 6 bolt block never ran, pic upon request! - $450
AMS deck/torque plate -$300
Eagle 94mm crank - $500
Kiggly 6 bolt in a 2G SFI flex plate - $280
Kiggly 12 tooth crank trigger kit -$200
Kiggly HLA pressure reg - $125
Kiggly main girdle - $100
Tial 50mm BOV -$225
Precision Billet Torque converter -$750
Misc Vibrant van jan clamps 3'', first come first serve -$75 each
Power division Zero tick lifers -$150
EVO 8 Rockers - $150
<a href="http://s1197.photobucket.com/user/85mmek9/media/047_zps1c900c44.jpg.html" target="_blank"><img src="http://i1197.photobucket.com/albums/aa437/85mmek9/047_zps1c900c44.jpg" border="0" alt=" photo 047_zps1c900c44.jpg"/></a>
Built 6 bolt head, all set up with super tech valve train and Ferrea locks! Patterson Racing port work and mission critical control valve job and blend work and assembly! The valve train is set up for the big Kelford cams I have for sale.
$1250
Kelford Cams (big) -$ 500
Garrett core, 24x12.1x4.5 -$300
2 weld RTS 15x8 wheels with MH 26x10x15 DOT slick, I have all 4 slicks. $625
1999 Eclipse with 50k orginal miles! Sibon carbon trunk and hatch, the hatch still needs lexan or glass installed. New 10 point cage, chute and net all done by Riffle Motorsports in Newton KS, also a custom 10.5 outlaw wind was built and installed, one off! Paint was custom done 5 years ago and is still in great shape! Car is set up for the track but if you wanted to you could also street the car. Moly front lower rad bar for weight and clearancing, Kirky drag seat with custom moly mounts, NRG steering wheel and quick release. 8 Gallon fuel cell with -10 feed and -8 return all up to meth standards. There is a mount in the back for a magnafuel pump ready to go. I can clean up and take more pics if someone is interested, I must sell because I have to put more important things in life first for once . with some polished eagle wheels $4800 OBO or trade maybe. 3-4 years ago the car was going 9.3-9.4 at 149ish on a much weaker set up on pretty low boost. I do have all the lights, center consol and front part interior of the car.
And back in the day