F.B.R.M. Benson/CP/Eagle/ARP/Golden Eagle/REV!!!!!!!
#1
Thread Starter
Join Date: Jul 2003
Location: TX, usa
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
F.B.R.M. Benson/CP/Eagle/ARP/Golden Eagle/REV!!!!!!!
Ok Guys im back again with a fully built turbo race motor for those of you who are looking to run at the minimum of 10 second passes.
The motor is a properly built LS/Vtec longblock:
B18B:
Benson sleeves
CP 9.5:1 pistons
Eagle H beam rods
polished and balanced crank
Arp rod bolts
Golden Eagle LS/Vtec kit
B16 head:
ported and polished
ARP exhaust/intake manifold studs
ARP head bolts
REV dual valve springs/retainers/valves
multi-angle valve job
adjustable cam gears
sir-II cams
Golden Eagle cam seal
Looking to trade for something of equal or greater value. If purchased out right, looking for nothing less than 5000. Just seeing what all is out there and looking over options. I am in no rush to sell this. LMK what you guys have. Im really looking for a DART bottom end (the casted version not the a sleeved honda motor) with a stroker kit.
WILL NOT PART OUT OR TRADE FOR STOCK MOTOR!!!!!
pictures VVVV (more to come)
The motor is a properly built LS/Vtec longblock:
B18B:
Benson sleeves
CP 9.5:1 pistons
Eagle H beam rods
polished and balanced crank
Arp rod bolts
Golden Eagle LS/Vtec kit
B16 head:
ported and polished
ARP exhaust/intake manifold studs
ARP head bolts
REV dual valve springs/retainers/valves
multi-angle valve job
adjustable cam gears
sir-II cams
Golden Eagle cam seal
Looking to trade for something of equal or greater value. If purchased out right, looking for nothing less than 5000. Just seeing what all is out there and looking over options. I am in no rush to sell this. LMK what you guys have. Im really looking for a DART bottom end (the casted version not the a sleeved honda motor) with a stroker kit.
WILL NOT PART OUT OR TRADE FOR STOCK MOTOR!!!!!
pictures VVVV (more to come)
Thread
Thread Starter
Forum
Replies
Last Post
b18b1 - je pistons 9.2:1 - eagle hp rods (3/8's arp rod bolts) - knifed crank - 950$ - GE ls/vtec ki
caspers_hatch
Classifieds: Forced Induction
2
12-18-2005 07:51 AM
pushinlsteg
Forced Induction
10
08-09-2005 10:23 AM