Tippyman's Project Thread
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">
Gotcha. So, like 14-15 then. And I'll let out a little air after each run.
</TD></TR></TABLE>
yeah, just check and recheck them until you can figure it out.
good luck. im rootin for you to hit 13s!
Gotcha. So, like 14-15 then. And I'll let out a little air after each run.
</TD></TR></TABLE>
yeah, just check and recheck them until you can figure it out.
good luck. im rootin for you to hit 13s!
Honda-Tech Member
Joined: Jul 2005
Posts: 234
Likes: 0
From: elyria ohio, oh, usa
to the guy saying something about axles.... yea its all preloading my buddy is making 400whp in his eg hatch on stock axles stock tranny and slicks. and he hasnt broke anything yet.
i think with some good launches on those radials and some good driving u can get some mid-low 13's.
i think with some good launches on those radials and some good driving u can get some mid-low 13's.
Re: (teamlegacy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teamlegacy »</TD></TR><TR><TD CLASS="quote"> Buy me some dinner and I'll hook yous up.</TD></TR></TABLE>
maybe even a movie? lol, i want to see this hit the 13's also
maybe even a movie? lol, i want to see this hit the 13's also
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: (pandarex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teamlegacy »</TD></TR><TR><TD CLASS="quote">Tim, I work and have access to every Midas in the greater Richmond/Mechanicsville/Colonial Heights area. Buy me some dinner and I'll hook yous up.</TD></TR></TABLE>
Cool man. I still owe you that $15 too...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">good luck. im rootin for you to hit 13s!</TD></TR></TABLE>
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extensioncordy »</TD></TR><TR><TD CLASS="quote">to the guy saying something about axles.... yea its all preloading my buddy is making 400whp in his eg hatch on stock axles stock tranny and slicks. and he hasnt broke anything yet. </TD></TR></TABLE>
I'm not really worried about the axles, I'm gonna preload, plus if they break, no biggie, i'll just get the autozone axles. Lifetime warranty FTW.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pandarex »</TD></TR><TR><TD CLASS="quote">
maybe even a movie? lol, i want to see this hit the 13's also</TD></TR></TABLE>
I'm trying to get tires mounted, not get laid.
Trust me, no one wants to see me hit 13's more than I do.
Cool man. I still owe you that $15 too...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">good luck. im rootin for you to hit 13s!</TD></TR></TABLE>
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extensioncordy »</TD></TR><TR><TD CLASS="quote">to the guy saying something about axles.... yea its all preloading my buddy is making 400whp in his eg hatch on stock axles stock tranny and slicks. and he hasnt broke anything yet. </TD></TR></TABLE>
I'm not really worried about the axles, I'm gonna preload, plus if they break, no biggie, i'll just get the autozone axles. Lifetime warranty FTW.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pandarex »</TD></TR><TR><TD CLASS="quote">
maybe even a movie? lol, i want to see this hit the 13's also</TD></TR></TABLE>
I'm trying to get tires mounted, not get laid.
Trust me, no one wants to see me hit 13's more than I do.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: (UltimX)
Two different ways, really.
Some people stage and let the clutch out just to the point where its starting to catch, and hold it there.
Some people let the clutch out to just past the point of catching and hold the car back with the e-brake or a staging brake.
Some people stage and let the clutch out just to the point where its starting to catch, and hold it there.
Some people let the clutch out to just past the point of catching and hold the car back with the e-brake or a staging brake.
Honda-Tech Member
iTrader: (1)
Joined: Sep 2005
Posts: 5,669
Likes: 0
From: Wasted away again in Margaritaville
Re: (Tippyman)
Tires are hot and you're car is gonna ****** roll down the track next Saturday I'm trying everything I can to be there and hopefully with Kenny.
I'm trying everything I can to be there and hopefully with Kenny.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: (Ross 4107)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ross 4107 »</TD></TR><TR><TD CLASS="quote">Tippymans car has been resurrected and will live again.
I'll let him tell you what i had to do...</TD></TR></TABLE>
Lol. Apparently I am a little girly man and don't know how to tighten down bolts. The axle nut was loose!
Other than that, everything went pretty much as expected. Timing retarded 2 degrees, leakdown 11%, little coolant leak fixed, and brand new oem t-belt, waterpump, tensioner, and covers are on!
Thanks Ross!
I'm taking the car to Colin tomorrow to get the tires mounted on my balla rims.
I'll let him tell you what i had to do...</TD></TR></TABLE>
Lol. Apparently I am a little girly man and don't know how to tighten down bolts. The axle nut was loose!
Other than that, everything went pretty much as expected. Timing retarded 2 degrees, leakdown 11%, little coolant leak fixed, and brand new oem t-belt, waterpump, tensioner, and covers are on!
Thanks Ross!
I'm taking the car to Colin tomorrow to get the tires mounted on my balla rims.
Honda-Tech Member
iTrader: (1)
Joined: Sep 2005
Posts: 5,669
Likes: 0
From: Wasted away again in Margaritaville
Re: (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ross 4107 »</TD></TR><TR><TD CLASS="quote">Tippymans car has been resurrected and will live again.
I'll let him tell you what i had to do...</TD></TR></TABLE>
To bad you weren't there for his starter escapade
I'll let him tell you what i had to do...</TD></TR></TABLE>
To bad you weren't there for his starter escapade
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: (jdm_ef3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_ef3 »</TD></TR><TR><TD CLASS="quote">
To bad you weren't there for his starter escapade </TD></TR></TABLE>
BWAHAHAHA!!!
Yeah, that **** was not funny when I had to go to C.A.P.S. for a new one with Brittany the next day.
DO NOT TAKE THE TWO SKINNY BOLTS OUT OF YOUR STARTER! You WILL NOT be able to get it back together...
To bad you weren't there for his starter escapade
</TD></TR></TABLE>BWAHAHAHA!!!
Yeah, that **** was not funny when I had to go to C.A.P.S. for a new one with Brittany the next day.
DO NOT TAKE THE TWO SKINNY BOLTS OUT OF YOUR STARTER! You WILL NOT be able to get it back together...
Honda-Tech Member
Joined: Dec 2004
Posts: 1,585
Likes: 0
From: ND
Re: (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">
BWAHAHAHA!!!
Yeah, that **** was not funny when I had to go to C.A.P.S. for a new one with Brittany the next day.
DO NOT TAKE THE TWO SKINNY BOLTS OUT OF YOUR STARTER! You WILL NOT be able to get it back together... </TD></TR></TABLE>hah me and my dad took my starter apart on the sedan and i couldnt figure it out,but he used to rebuild starters:-p he got it back together in like 2 minutes
BWAHAHAHA!!!
Yeah, that **** was not funny when I had to go to C.A.P.S. for a new one with Brittany the next day.
DO NOT TAKE THE TWO SKINNY BOLTS OUT OF YOUR STARTER! You WILL NOT be able to get it back together...
</TD></TR></TABLE>hah me and my dad took my starter apart on the sedan and i couldnt figure it out,but he used to rebuild starters:-p he got it back together in like 2 minutes
In a Junkyard near you.
Joined: Mar 2004
Posts: 5,084
Likes: 2
From: Richmond, Va
Re: (jdm_ef3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_ef3 »</TD></TR><TR><TD CLASS="quote">
To bad you weren't there for his starter escapade </TD></TR></TABLE>
LOL!!!
To bad you weren't there for his starter escapade
</TD></TR></TABLE>LOL!!!
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: Tippyman's Project Thread (blub16hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blub16hatch »</TD></TR><TR><TD CLASS="quote">where did you get that lip thats on the 4dr</TD></TR></TABLE>
The burgandy one? It was a mugen lip for an EG.
The burgandy one? It was a mugen lip for an EG.
Honda-Tech Member
iTrader: (1)
Joined: Sep 2005
Posts: 5,669
Likes: 0
From: Wasted away again in Margaritaville
Re: Tippyman's Project Thread (Tippyman)
It's my old four door. It's a Mugen EG hatch lip. To make it fit a EF you need a heat gun, patience and something to cut the ends off (dremel tool).
Honda-Tech Member
Joined: Aug 2004
Posts: 3,366
Likes: 0
From: Charleston, SC - Myrtle Beach, SC
Re: (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">I hope so, and yes Tirerack owns. </TD></TR></TABLE>
I autocrossed at their test track. It oenz too.
</TD></TR></TABLE>I autocrossed at their test track. It oenz too.
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">i dont really feel like searching the thread for your setup, i looked at it a few monthes ago and you did a sohc zc. Whats the setup you are expecting 13s from?</TD></TR></TABLE>
stock zc..... duh!
stock zc..... duh!
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: (STREETWERKZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">
stock zc..... duh! </TD></TR></TABLE>
Well, Cometic HG and ARP headstuds. Other than that it's stock.
stock zc..... duh!
</TD></TR></TABLE>Well, Cometic HG and ARP headstuds. Other than that it's stock.
In a Junkyard near you.
Joined: Mar 2004
Posts: 5,084
Likes: 2
From: Richmond, Va
Re: (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">
Well, Cometic HG and ARP headstuds. Other than that it's stock. </TD></TR></TABLE>
i can vouch for that
Well, Cometic HG and ARP headstuds. Other than that it's stock.
</TD></TR></TABLE>i can vouch for that
