What's up everyone. Just started a new project last night snapped a few pics of the tear down. Much more on the way. Hopefully you guys will be able to answer and question I have and I'll do the same...

The plan is J32a2 with a +04 TL 6 spd tranny..

Enjoy:
Before





Can someone tell me if this amount of oil in the IM is normal?

 

nice! i've been waiting to see one of these torn apart. just refresh or actually building it?

 

Ummm that's the big question. To build or not to build that is the question lol but seriously as of now I'm doing rings, rod bolts and every gasket possible... Well see what happens

 

in for this build fasho!

 

Just a little up date started cleaning the block and removing the stock paint off the valve covers. Also remove the butterfly from the I.M will have pics tonight or tomorrow of that. Enjoy. Also i have been using my iphone camera for these pics sorry about that will bring my digital camera to the shop next time.

Before:

After (still needs more work) :


Valve covers completely stripped:



Both heads side by side, IM pretty sure the one on the right was replaced


since i didn't post any pics of the pistons or deck here you are


My boy jeff with the drill and val holding the V.C making sure it doesn't fly away

 

in for updates!

 

Hemm, this thread looks like a win!

 

I'm tring hopeing to pick up a shell soon and get this really going

 

mmmmmmm j's

 

nice idea on refreshening the motor

 

Yea I felt it was necessary to do this since i want this project to last.

Other update the shell that i was suppose to pick up this weekend, ends up that the kid doesn't have the title for it yet so he is going to call me sometime next if its actually legit.

 

So iv done some playing with the ds and the bs looked into a k sounded sick to me but then I just started reading about the j just a lil bit ago all I'm trying to find out is this what I need to do it

-Motor (j32a2)
-Mounts (Hybrid racing)
-Transmission (accord 6 Speed)
-RPM Conversion
-Fuel lines
-Axles
-Shifter assembly (trying to figure out K or the accords or a hybrid racing shifter box)
-ECU
-Harness

And how much is it goingto run me iv heard from 1500 to 2000 to do it and I'm lookingto put this in an Integra

 

This is just something I can't really sink my teeth into, something about it just doesnt sit right with me.



Do you know what your ground clearance will be like with the v6? I dont know what mounts you plan on using, but will the hood shut or are there other tricks to get it to shut?


ps - put it in the back

 

In for more pics/updates