My new project
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
My new project. *Going Right Hand Drive*
I finally started my right hand drive project today. I have been thinking about it for a while and decided earlier this week that when I got home for the weekend I would start....
My car this morning before the tear down....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Then I took a little break to catch some lunch...
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
And this was the final result of a good sized 5 hour work day on it....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Tried to get most of teh engine bay done today. Going to pull the motor and tranny out tomarrow at some point and hit the interior just as hard. A fellow honda-tech member "jdmorgan" was working on it a little today when i was in the engine bay. He will chime in here sometime soon
Looking to have the car all ready so I can start drilling after this weekend...
Modified by rdssk8rcs1 at 9:07 PM 8/24/2007
My car this morning before the tear down....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Then I took a little break to catch some lunch...
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
And this was the final result of a good sized 5 hour work day on it....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Tried to get most of teh engine bay done today. Going to pull the motor and tranny out tomarrow at some point and hit the interior just as hard. A fellow honda-tech member "jdmorgan" was working on it a little today when i was in the engine bay. He will chime in here sometime soon
Looking to have the car all ready so I can start drilling after this weekend...
Modified by rdssk8rcs1 at 9:07 PM 8/24/2007
#5
Honda-Tech Member
Join Date: Jun 2003
Location: Danbury, CT, 06804
Posts: 3,775
Likes: 0
Received 0 Likes
on
0 Posts
im really just helping him with wiring and plumbing. i pulled his dash, gauges, srs ****, and most any interior forward of the rear seats out. i got started on the wiring a bit too. jimmy got the whole bay stripped today too.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDMorgan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMorgan »</TD></TR><TR><TD CLASS="quote">ls/vt. rods, pistons, t3/t4, and lsd tranny.</TD></TR></TABLE>
thank you....just found out that last part today
thank you....just found out that last part today
#18
Junior Member
Join Date: Jun 2007
Location: fresno, ca
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rdssk8rcs1)
very nice project i never new you can change it to right hand drive ill keep following and see how it is. if it turns out good you can teach me how to do it.
#19
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: (pokmijn)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pokmijn »</TD></TR><TR><TD CLASS="quote">very nice project i never new you can change it to right hand drive ill keep following and see how it is. if it turns out good you can teach me how to do it.</TD></TR></TABLE>
Well so far it hasnt be difficult at all its just very time consuming
Well so far it hasnt be difficult at all its just very time consuming
#21
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: (silver knight)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by silver knight »</TD></TR><TR><TD CLASS="quote">cant wait to see the final result!</TD></TR></TABLE>
your telling me. Hoping to clean the bay out a lot while doing this aswell
your telling me. Hoping to clean the bay out a lot while doing this aswell
#24
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new project. *Going Right Hand Drive* (rdssk8rcs1)
Worked on the car more this weekend starting on the spotwelds....
Also removed the subframe, steering rack and all teh front suspension....
Also finally removed the fenders, front bumper and lights.....
Also removed the subframe, steering rack and all teh front suspension....
Also finally removed the fenders, front bumper and lights.....
#25
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2006
Location: 626 SoCal
Posts: 1,956
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new project. *Going Right Hand Drive* (rdssk8rcs1)
hey. lookin good.. how'd u take the windshield off.. i dont wanna have someone come take it off unless i really have to