My DA/LSVTEC Build thread!!! jihad on 56K!... ongoing build!
#52
Honda-Tech Member
Thread Starter
Re: (alex_s817)
Thanks guys. Not sure what I want to do with the fuel tank .. kind of looking at a fuel cell setup, but I have alot of research to do on what they require and may end up just cleaning up the tank and replacing the fuel pump instead.
Last thing looming is my valve cover! haha .. it's been neglected all this time and I can't decide what I want to do with it, guess I better hurry up with that eh?
Last thing looming is my valve cover! haha .. it's been neglected all this time and I can't decide what I want to do with it, guess I better hurry up with that eh?
#54
Honda-Tech Member
Thread Starter
Re: (Jerms)
Sneak peak update from today! Pic is crappy, snapped it quick:
Fuel tank is off getting hot-tanked, should get it back tomorrow .
Fuel tank is off getting hot-tanked, should get it back tomorrow .
#55
Honda-Tech Member
Thread Starter
Re: (redlineintegra)
Today's progress:
Fuel tank came back from the radiator shop (hot-tanking):
Cleaned up and painted the GSR manifold pieces:
Cleaned up, sanded, primered the valve cover:
Stuck for ideas on what to do with the valve cover, hrmm.
Next up, valve springs/retainers install (next weekend), claying for clearances before final engine assembly.:hi5:
Fuel tank came back from the radiator shop (hot-tanking):
Cleaned up and painted the GSR manifold pieces:
Cleaned up, sanded, primered the valve cover:
Stuck for ideas on what to do with the valve cover, hrmm.
Next up, valve springs/retainers install (next weekend), claying for clearances before final engine assembly.:hi5:
#60
Honda-Tech Member
Thread Starter
Re: (integraXTC)
Thanks all!
Some updates from today..
Picked up some parts:
Grabbed me a cold brew ..
Head studs in!
Valves in!
AAAAAAAAAND that's where I had to stop, dammit! I was all stoked to clay and get the motor together, but those muthafawkin valve springs are toight! So I'll have to get me a compressor tool and do those on the weekend.
Some updates from today..
Picked up some parts:
Grabbed me a cold brew ..
Head studs in!
Valves in!
AAAAAAAAAND that's where I had to stop, dammit! I was all stoked to clay and get the motor together, but those muthafawkin valve springs are toight! So I'll have to get me a compressor tool and do those on the weekend.
#61
Honda-Tech Member
Thread Starter
Re: (redlineintegra)
Updates!
Valve springs/retainers/keepers installed:
Hauled the motor in two pieces up to the garage:
Head gasket in place:
Head installed, torqued:
Cams installed:
Caps:
Cam covers:
Cam gears blang!!!
Timing belt on:
Valve cover on temporarily:
How it sits until tomorrow!
Valve springs/retainers/keepers installed:
Hauled the motor in two pieces up to the garage:
Head gasket in place:
Head installed, torqued:
Cams installed:
Caps:
Cam covers:
Cam gears blang!!!
Timing belt on:
Valve cover on temporarily:
How it sits until tomorrow!
#62
Honda-Tech Member
Thread Starter
Re: (redlineintegra)
Not a whole lot done today, but some updates:
Pulled the LS trans off (going to use it until I find an S1)
Cleaned up the starter
Started on the trans
Painted the M/C, new grommet:
Distributor installed:
Got the wheels back from the chemical dip (will be painted soon)
New injectors installed!
Last batch order of parts will arrive in two weeks! Then she'll be alive :burnout:
Pulled the LS trans off (going to use it until I find an S1)
Cleaned up the starter
Started on the trans
Painted the M/C, new grommet:
Distributor installed:
Got the wheels back from the chemical dip (will be painted soon)
New injectors installed!
Last batch order of parts will arrive in two weeks! Then she'll be alive :burnout:
#63
Honda-Tech Member
Thread Starter
Re: (redlineintegra)
Updates !!
Last items ordered today:
Rywire harnesses
Outlaw gasket kit
AEM UEGO
SMSP header
Innovative mounts
FullRace crossmember
FTW!!!
Pics from the last week:
Refinished my wheels today boys! Few pics of the process, gonna let em cure for a good week before I mount tires on em:
How I bought them a couple weeks ago: ($300)
After being chemical-dipped, sand-blasted, and the lip machined: ($120)
3 layers of paint were removed, uuugliness!!
Lip painted:
Debated going silver/red:
Nahhhhh!!:
Inside painted:
Outside painted:
Finished product FTW!! I personally love how they turned out, MUCH better than I had hoped!
Other three wheels finished up:
Some valve cover work (waiting on parts so I'm left to some DIY stuff!):
Two weeks from install, header should arrive around then too!! :rockon:
Last items ordered today:
Rywire harnesses
Outlaw gasket kit
AEM UEGO
SMSP header
Innovative mounts
FullRace crossmember
FTW!!!
Pics from the last week:
Refinished my wheels today boys! Few pics of the process, gonna let em cure for a good week before I mount tires on em:
How I bought them a couple weeks ago: ($300)
After being chemical-dipped, sand-blasted, and the lip machined: ($120)
3 layers of paint were removed, uuugliness!!
Lip painted:
Debated going silver/red:
Nahhhhh!!:
Inside painted:
Outside painted:
Finished product FTW!! I personally love how they turned out, MUCH better than I had hoped!
Other three wheels finished up:
Some valve cover work (waiting on parts so I'm left to some DIY stuff!):
Two weeks from install, header should arrive around then too!! :rockon:
#66
Honda-Tech Member
Thread Starter
Re: (JasperDA9)
Some minor updates from today:
New gaskets on the IM:
IM installed with fuel rail, injectors:
And a sneak peak at my valve cover work (still to be completed):
That's all till tomorrow!
New gaskets on the IM:
IM installed with fuel rail, injectors:
And a sneak peak at my valve cover work (still to be completed):
That's all till tomorrow!
#70
Honda-Tech Member
Join Date: Jan 2003
Location: PA
Posts: 5,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tenedor sports)
g2ic OG!! Car looks great man! Props on keeping it for 13 years! I remember back in the day i was the biggest fan of harookz car.. do you have any other pics of it?
#71
Honda-Tech Member
Thread Starter
Re: (BACKintheDA)
thanks guys! I do have more pics of Haruki's car somewhere, I'll have to dig em up though.
Updates from today:
Parts that arrived (Rywire harnesses, Outlaw Engineering gasket kit, complete fuel system fittings/hoses, FPR, filter, pump, Endyn block adapter:
Installed the Endyn adapter:
Outlaw gasket kit installed, throttle body as well:
Currently having issues installing the stainless lines into the hose ends, I guess I need some better methods or hacksaw blades, cause **** ain't workin'! Also, the Walbro pump I have is too long for the OEM bracket and did not come with a screen FTL .. more updates next weekend
.
Updates from today:
Parts that arrived (Rywire harnesses, Outlaw Engineering gasket kit, complete fuel system fittings/hoses, FPR, filter, pump, Endyn block adapter:
Installed the Endyn adapter:
Outlaw gasket kit installed, throttle body as well:
Currently having issues installing the stainless lines into the hose ends, I guess I need some better methods or hacksaw blades, cause **** ain't workin'! Also, the Walbro pump I have is too long for the OEM bracket and did not come with a screen FTL .. more updates next weekend
.
#72
Honda-Tech Member
Thread Starter
Re: (redlineintegra)
Installed flywheel
Installed pressure plate/disc
And a quick pic of one wheel mounted (disregard the rusted rotor!)
Been kinda quiet with pictures lately mostly because I have been waiting for parts (mounts, header, catalytic converter, chipped ecu). I will have the mounts this week, so the engine will be going in pretty soon! Also have been reinstalling the fuel tank with the Walbro pump, installing some generic coilover sleeves (temporary to adjust for ride height, will be going the GC/Koni route in the summer), converting fuel supply/return hardlines to -6AN fittings, and reinstalling the exhaust. 2 weeks from today will be the turnkey (crosses fingers!!!).
UEGO arrived:
Innovative mounts as well (SpoolinDevelopment FTW):
Camera's batteries went dead so that's all I have for today as far as pics. Pretty much spent the day re&re'ing the rear suspension (snapped LCA bolt), re-hanging the exhaust and fuel tank, mounting the transmission and engine mounts, as well as the catch can and fuel pressure regulator. Couple more full days of installs/prepping before the motor goes in on the 15th!
UPDATED 04/09/07:
So, pretty much down to waiting for my header FTL! Should be shipped soon here though, MAY have to postpone the firing up until the 22nd though.
Progress pics:
Installed the catch can, fuel filter, and fuel pressure regulator with lines:
Transmission mounted, wiring harness attached, injectors modified and connected, unfinished valve cover:
Fenders back on, can you spot the new CF? :
Installed pressure plate/disc
And a quick pic of one wheel mounted (disregard the rusted rotor!)
Been kinda quiet with pictures lately mostly because I have been waiting for parts (mounts, header, catalytic converter, chipped ecu). I will have the mounts this week, so the engine will be going in pretty soon! Also have been reinstalling the fuel tank with the Walbro pump, installing some generic coilover sleeves (temporary to adjust for ride height, will be going the GC/Koni route in the summer), converting fuel supply/return hardlines to -6AN fittings, and reinstalling the exhaust. 2 weeks from today will be the turnkey (crosses fingers!!!).
UEGO arrived:
Innovative mounts as well (SpoolinDevelopment FTW):
Camera's batteries went dead so that's all I have for today as far as pics. Pretty much spent the day re&re'ing the rear suspension (snapped LCA bolt), re-hanging the exhaust and fuel tank, mounting the transmission and engine mounts, as well as the catch can and fuel pressure regulator. Couple more full days of installs/prepping before the motor goes in on the 15th!
UPDATED 04/09/07:
So, pretty much down to waiting for my header FTL! Should be shipped soon here though, MAY have to postpone the firing up until the 22nd though.
Progress pics:
Installed the catch can, fuel filter, and fuel pressure regulator with lines:
Transmission mounted, wiring harness attached, injectors modified and connected, unfinished valve cover:
Fenders back on, can you spot the new CF? :