My DA/LSVTEC Build thread!!! jihad on 56K!... ongoing build!
02-01-2007, 09:30 AM
#37
Honda-Tech Member
Join Date: Aug 2002
Location: San Diego, CA
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Re: (redlineintegra)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redlineintegra »</TD></TR><TR><TD CLASS="quote">I used an ED/EF manual rack, with EF inner tie rod ends, and DA outers (Altrom brand). 
</TD></TR></TABLE>
Rack for the Si or non Si?
</TD></TR></TABLE>Rack for the Si or non Si?
02-01-2007, 06:26 PM
#38
Honda-Tech Member
Thread Starter
Re: (whoa its len 2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whoa its len 2 »</TD></TR><TR><TD CLASS="quote">Rack for the Si or non Si?</TD></TR></TABLE>
Thanks guys! Again, the wheels are something that will require significant modifications if I do decide to run them, still up in the air.
As for the manual rack, mine was out of an Si ( I believe anyway). Looking into the Quaife kit for it as soon as the build is complete.
Thanks guys! Again, the wheels are something that will require significant modifications if I do decide to run them, still up in the air.
As for the manual rack, mine was out of an Si ( I believe anyway). Looking into the Quaife kit for it as soon as the build is complete.
02-04-2007, 04:21 PM
#44
Honda-Tech Member
Thread Starter
Re: My DA/LSVTEC Build thread!!! jihad on 56K!... ongoing build! (redlineintegra)
New stuff added, waiting on valve springs/retainers and head studs before I can slap her together .. guess I better get to this valve cover too eh!?
Double-checking the journals for lubrication, retorqing rod cap nuts, main bolt:
Oil pump installed WITH o-ring:
Oil pickup gasket arrived:
Oil pickup installed:
Oil pan gasket:
Oil pan/Spoon drain plug (YA something Spoon! haha):
Short block assembled completely:
Next up: wednesday = valve cover/chassis work! updates then.
Double-checking the journals for lubrication, retorqing rod cap nuts, main bolt:
Oil pump installed WITH o-ring:
Oil pickup gasket arrived:
Oil pickup installed:
Oil pan gasket:
Oil pan/Spoon drain plug (YA something Spoon! haha):
Short block assembled completely:
Next up: wednesday = valve cover/chassis work! updates then.
02-11-2007, 09:19 PM
#45
Honda-Tech Member
Thread Starter
Re: My DA/LSVTEC Build thread!!! jihad on 56K!... ongoing build! (redlineintegra)
Updates today (fuel tank dropped, head progress):
Rear raised to fit mah bucket:
Mah bucket (no it's really a bucket
)
Out with the fueeeel:
Fugly tank out:
Enough of that, to the head! .. LMA's in:
Rocker assemblies in:
That important centre dowel/o-ring!
Bare:
Ready to go:
Still waiting on my valve springs/retainers!!!
Rear raised to fit mah bucket:
Mah bucket (no it's really a bucket
)Out with the fueeeel:
Fugly tank out:
Enough of that, to the head! .. LMA's in:
Rocker assemblies in:
That important centre dowel/o-ring!
Bare:
Ready to go:
Still waiting on my valve springs/retainers!!!
