Coupe from GER... drive härd
07-10-2010, 12:30 PM
#51
Honda-Tech Member
Join Date: Jan 2009
Location: Fredericksburg,VA
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
damn dude! sick build, can i ask though how you are getting all the bolts and hardware re coated? zinc i believe? who does that, and how much does it cost?
i want to re do my ej1, and that would be great to know!
also, how are the ES bushings? im planning on installing those in my car
i want to re do my ej1, and that would be great to know!
also, how are the ES bushings? im planning on installing those in my car
07-19-2010, 04:47 AM
#52
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
correct sir! zinc recoated!!
cost around 250$...
small update... time to seal the chassis... pretty f*ckn comfortable with a jackstand and a few bits of wood :/
and some bodywork to drive the 205/45 tires slammed without any problems...
regards
cost around 250$...
small update... time to seal the chassis... pretty f*ckn comfortable with a jackstand and a few bits of wood :/
and some bodywork to drive the 205/45 tires slammed without any problems...
regards
08-15-2010, 09:56 AM
#57
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
just a small update...
painting my starter and a comparsion between a few brake cylinders...
the poly filled mounts
the new springs for the suspension setup...
master cylinders...
i think i will use the itr abs cylinder with the same brake booster and a 91' crx propotioning valve... any suggestions??
painting my starter and a comparsion between a few brake cylinders...
the poly filled mounts
the new springs for the suspension setup...
master cylinders...
i think i will use the itr abs cylinder with the same brake booster and a 91' crx propotioning valve... any suggestions??
09-29-2010, 02:42 AM
#59
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
finally!!!! have found a place to work on the car with 2 buddys...
ready to get in...
and after some more elbow grease and some woodwork...
and some new parts...
_____________
aaaaand got a new daily...
old
vs "new"
42000 miles and 4wd realtime^^
ive made an oil+filterchange and give her a new cooler+therm.
put on some oldskool bbs and a thule rack...
lookin' forward to drop her soon...
regards tobi
ready to get in...
and after some more elbow grease and some woodwork...
and some new parts...
_____________
aaaaand got a new daily...
old
vs "new"
42000 miles and 4wd realtime^^
ive made an oil+filterchange and give her a new cooler+therm.
put on some oldskool bbs and a thule rack...
lookin' forward to drop her soon...
regards tobi
10-07-2010, 11:59 AM
#68
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
thanks fellas...
try to keep pushin' me forward but every day im tired and lazy from work :/
shuttle =
________
next week goin' strong on e85...
and throw in new plugs and fresh oil+filter+fuelfilter
and some interior goodies... always keep an eye on engine-health!
and the rear fenders... lookin' forward to change them before first snow falls here in germany...
for driving pleasure
very rare and have spent 35 bucks... lol
coupe-time!!!1 =
______________
egt gauge... goes into the place where the clock sits
tial wg with cooling ports 8)
does anybody use them or recommend it?
greetings
try to keep pushin' me forward but every day im tired and lazy from work :/
shuttle =
________
next week goin' strong on e85...
and throw in new plugs and fresh oil+filter+fuelfilter
and some interior goodies... always keep an eye on engine-health!
and the rear fenders... lookin' forward to change them before first snow falls here in germany...
for driving pleasure
very rare and have spent 35 bucks... lol
coupe-time!!!1 =
______________
egt gauge... goes into the place where the clock sits
tial wg with cooling ports 8)
does anybody use them or recommend it?
greetings
01-28-2011, 02:32 AM
#70
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
gotcha!!!
...and just fab'd a box to sandblast some dirty parts!
finished fuel rail... nice and clean
done!
bye bye!
made some progress on my wagonvan project/dd too!
welded an custom stainless catback - 2 inch all the way back...
But have to reweld it with a flex-pipe -.-
rattlin' those f*ckin bolts out all the time^^
and replaced the driveshaft boot/cover (???)
got it tuned on e85 and push her to the ground...
and soon with some new shoes... any suggestions what color i should paint these rims?
greetings
...and just fab'd a box to sandblast some dirty parts!
finished fuel rail... nice and clean
done!
bye bye!
made some progress on my wagonvan project/dd too!
welded an custom stainless catback - 2 inch all the way back...
But have to reweld it with a flex-pipe -.-
rattlin' those f*ckin bolts out all the time^^
and replaced the driveshaft boot/cover (???)
got it tuned on e85 and push her to the ground...
and soon with some new shoes... any suggestions what color i should paint these rims?
greetings
07-05-2012, 01:19 PM
#72
Honda-Tech Member
Join Date: Jun 2010
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coupe from GER... drive härd
Wow some good work here looks like its coming along nicely, question what was in the doors were those packing penuts, what was the purpose does it keep ur door panels from raddlwing or something, what is the best kind of glue for gluuing stuff luke that or like foam if i wanted to but some behind my door panels?
Thread
Thread Starter
Forum
Replies
Last Post
