Bryce's Honda life in Fargo build thread!
#51
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Here is the turbo for the black crx. Turbonetics super 60. It's a 60 trim T3 turbo with a stage 3 wheel/extended shaft.
I also got in my 2nd headlight bucket for the passenger side. The 1st one I got was crushed in shipping:S The black crx got in a fender bender years ago, and I have been waiting to replace the bucket. It's also getting a roll bar put in right before paint.
My OEM hood, fenders, and 91 front bumper should be in anyday. My Mugen Fit parts just came in. It took 3 months of waiting for them to come in at the dealership I work at..
Got some more hardwear too. I love new bolts.
I also got in my 2nd headlight bucket for the passenger side. The 1st one I got was crushed in shipping:S The black crx got in a fender bender years ago, and I have been waiting to replace the bucket. It's also getting a roll bar put in right before paint.
My OEM hood, fenders, and 91 front bumper should be in anyday. My Mugen Fit parts just came in. It took 3 months of waiting for them to come in at the dealership I work at..
Got some more hardwear too. I love new bolts.
#53
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
I'm bored at home so I decided to update the thread with a few random pictures of past cars that I have built. Most of these cars came into my life busted up and stock. Last time I added it up I have owned around 30 Hondas :thumb:
Black crx 2005
Still 05
2006
Black crx 2008
2009
My old DD vx hatch ugg rust
"Dseries" Integra haha (Sold before it was done)
Motor ready for it. Vx with y8 tranny, then I was going to boost it using as many stock vx parts as I could. Then the bet was if I could beat a stock TypeR qarter mile time haha.
Manifold lol
My 92 si mid makeover
My red teg
what can I say, I live hub caps.
Sorry if I posted anything twice! I hope you enjoyed some of my old prodject and photos! You can never have too many pictures in a build thread right?
Black crx 2005
Still 05
2006
Black crx 2008
2009
My old DD vx hatch ugg rust
"Dseries" Integra haha (Sold before it was done)
Motor ready for it. Vx with y8 tranny, then I was going to boost it using as many stock vx parts as I could. Then the bet was if I could beat a stock TypeR qarter mile time haha.
Manifold lol
My 92 si mid makeover
My red teg
what can I say, I live hub caps.
Sorry if I posted anything twice! I hope you enjoyed some of my old prodject and photos! You can never have too many pictures in a build thread right?
#57
Honda-Tech Member
Join Date: Oct 2009
Location: San Antonio,Tx
Posts: 1,384
Likes: 0
Received 0 Likes
on
0 Posts
#58
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Well guys, after months of driving the crx I upgraded. I need a DD with some creature comfort, mind you I was planing on getting a S2000 but after thinking about it they are not a practical DD. This came in for trade at the dealership I work at so I picked it up. Its sooo much better then I could have ever hoped. It is a 2006 civic si with 25k on the ticker. It has I/H/E, tein springs, slipstreams, and a Hondata reflash. It ran a 13.7 in sabin two years back with these mods.
On to the pics!
On to the pics!
#59
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Took a few shots in the fog.
I got my first Mugen part for the new wip.
New wheels, more Mugen, and lots of crx parts coming soon!
I got my first Mugen part for the new wip.
New wheels, more Mugen, and lots of crx parts coming soon!
#60
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Got my hardware in for the crx, and few for the Si yesterday. I'm so excited to use almost nothing but new bolts.
I'm using a few books to help me figure out how I want the si to look and what parts I want to get..
Honda CTR
Honda CTR Mugen parts mag
And a few others
I'm using a few books to help me figure out how I want the si to look and what parts I want to get..
Honda CTR
Honda CTR Mugen parts mag
And a few others
#62
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Thanks man, I will be getting another ITR/CTR red valve cover for both Si's the year.
all cell phone pictures for this update.. I will put up some real pictures as soon as I can.
Pushed the crx out so it could get the first taste of snow in years.
Got the new oem 91 crx hood. New hood latch, T-bar, and all the hardwear.
New oem 91 crx front bumper, along with bumper lights and the J's lip is on its way.
A test fit to see how everything lines up.
I also got a set of perfect 91 headlights, and corner lights. Here is a picture of it all together.
I can not tell you how much I want this snow to go away! The white crx is sold. I took most of the good parts off the car before I sold it, so the NRG hub, B&M shifter, seats, 91 tail lights, and hub caps all were removed. Most of the parts are going on the black crx.
all cell phone pictures for this update.. I will put up some real pictures as soon as I can.
Pushed the crx out so it could get the first taste of snow in years.
Got the new oem 91 crx hood. New hood latch, T-bar, and all the hardwear.
New oem 91 crx front bumper, along with bumper lights and the J's lip is on its way.
A test fit to see how everything lines up.
I also got a set of perfect 91 headlights, and corner lights. Here is a picture of it all together.
I can not tell you how much I want this snow to go away! The white crx is sold. I took most of the good parts off the car before I sold it, so the NRG hub, B&M shifter, seats, 91 tail lights, and hub caps all were removed. Most of the parts are going on the black crx.
#63
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Sorry this thread has became a mess of me just building all my cars at once, so if you guys hate it let me know and I will change it. I'm building the Turbo B16 CRX, FD2 Civic Si, and my 79 Roadrunner right now.
DD Civic Si update!
Right away I got mud flaps and filled in all the rock chips.
I hated the tinted tail lights, so those had to go.
I traded with a buddy at work who has a 2009 with 6,ooo miles on it.
Much better.
Then I got a new valve cover, CTR shift ****, and Mugen oil cap.
Tossed those in, along with a Mugen RR black oil dip stick.
Then I picked up some new DD tires, Falken RT615s (225/45/17)
And for autocross use Hoosier slicks. (225/40/17)
Crx update time;
Got a new T-bar, and new bumper lights! They look sooo clean new.
Here is a better shot of the test fit of the new front end.
A better shot of the rear brakes I putting in soon; Brembo blanks with Halk pads new studs/wheel bearings, Energy bushings, braided lines.
Used KYB adj shocks (Only used for 600 miles, but they are beat super looking)
Start button;
A few Moroso parts, over flow tank, and a kill switch. (They look cheaper then I expected so I don't know if they will get used)
Got a GSR valve cover that I clean up, and got ready for paint.
Injectors (DSM 440's I might not use these)
Front brakes, and I got yet ANOTHER set of rear 91 taillights!)
In the mean time built a K20 ITR lol
And lastly a old picture of the crx on the 4th of july. I loved this stage of the crx..
I just rolled it out of the garage a week ago. Painted the wheels, and installed a new starter. I also painted it satin black, spray paint style. I have to order some new tires, then pull the gas tank to have that cleaned out. Here are a few pictures of how it looks now. Only 31,ooo miles on it too! lol
Tossed the front brakes in the crx the other day.
Got to work on the harness, but only took this picture. It has nothing to do with the harness.
Got the USDM GSR valve cover ready for paint. I was hoping it would get hot enough to paint, but it only reached 68 even with my heat lamp on it
Got the harness as far as I could today with out installing the Rywire kit. I reloomed the whole motor harness. Also got the ITR brake booster, and master cylinder installed.
Assembled the motor;
ACT light weight flywheel, ACT stage 2 clutch, Hasport cable to hydro kit, and all new OEM bolts for everything~!
Motor hangin.
DD Civic Si update!
Right away I got mud flaps and filled in all the rock chips.
I hated the tinted tail lights, so those had to go.
I traded with a buddy at work who has a 2009 with 6,ooo miles on it.
Much better.
Then I got a new valve cover, CTR shift ****, and Mugen oil cap.
Tossed those in, along with a Mugen RR black oil dip stick.
Then I picked up some new DD tires, Falken RT615s (225/45/17)
And for autocross use Hoosier slicks. (225/40/17)
Crx update time;
Got a new T-bar, and new bumper lights! They look sooo clean new.
Here is a better shot of the test fit of the new front end.
A better shot of the rear brakes I putting in soon; Brembo blanks with Halk pads new studs/wheel bearings, Energy bushings, braided lines.
Used KYB adj shocks (Only used for 600 miles, but they are beat super looking)
Start button;
A few Moroso parts, over flow tank, and a kill switch. (They look cheaper then I expected so I don't know if they will get used)
Got a GSR valve cover that I clean up, and got ready for paint.
Injectors (DSM 440's I might not use these)
Front brakes, and I got yet ANOTHER set of rear 91 taillights!)
In the mean time built a K20 ITR lol
And lastly a old picture of the crx on the 4th of july. I loved this stage of the crx..
I just rolled it out of the garage a week ago. Painted the wheels, and installed a new starter. I also painted it satin black, spray paint style. I have to order some new tires, then pull the gas tank to have that cleaned out. Here are a few pictures of how it looks now. Only 31,ooo miles on it too! lol
Tossed the front brakes in the crx the other day.
Got to work on the harness, but only took this picture. It has nothing to do with the harness.
Got the USDM GSR valve cover ready for paint. I was hoping it would get hot enough to paint, but it only reached 68 even with my heat lamp on it
Got the harness as far as I could today with out installing the Rywire kit. I reloomed the whole motor harness. Also got the ITR brake booster, and master cylinder installed.
Assembled the motor;
ACT light weight flywheel, ACT stage 2 clutch, Hasport cable to hydro kit, and all new OEM bolts for everything~!
Motor hangin.
#64
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Had a nice few days, so I got to work.
Repainted everything I wanted to on the rear, then put all that back together. Look so good nice and clean.
Picked up a set of new taillight gaskets. Man these we hard to find.
Got the rear back together.
Got most of the engine bay wired and done.
put the new brakes and new Sportlines with KYB adj on.
I painted the valve cover and brakes a new Honda Insight color. I LOVE this color so much.
Also I got everything hooked up and got it running today.
Repainted everything I wanted to on the rear, then put all that back together. Look so good nice and clean.
Picked up a set of new taillight gaskets. Man these we hard to find.
Got the rear back together.
Got most of the engine bay wired and done.
put the new brakes and new Sportlines with KYB adj on.
I painted the valve cover and brakes a new Honda Insight color. I LOVE this color so much.
Also I got everything hooked up and got it running today.
#65
Honda-Tech Member
Join Date: Apr 2009
Location: San Diego, CA
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bryce's Honda life in Fargo build thread!
so much progress in every post! i dig the valve color a lot. what color is that exactly? . Great job so far! Baller on the OEM parts.
#66
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
#67
Honda-Tech Member
Join Date: Jul 2009
Location: ☆★ ℂolorado ★☆
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bryce's Honda life in Fargo build thread!
Clean *** crx , I didnt know people are doin it like that up here in ND. I may be moving up to Fargo (currently visiting) in a couple months, glad to see there is a little scene up here lol
#68
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Quite a few boosted 10/11 second hondas rolling around in street trim
(Hit me up if your in town, Ill show you around)
#70
Honda-Tech Member
Join Date: Jul 2009
Location: ☆★ ℂolorado ★☆
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bryce's Honda life in Fargo build thread!
Nice nice, ill be getting my license back here within a month or 2 and have my car up here too. Ill hit you up and what not so you can show me how you up north folks do it lol.
#72
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
Took the car over to Matts shop and we started putting the turbo kit together. He wanted to go with a stock SRT intercooler, that he cuts and puts new end tanks on. It will be a back door style FMIC.
Mock up rad, with manifold.
Tial 38mm wategate in place.
Mock up rad, with manifold.
Tial 38mm wategate in place.
#73
Honda-Tech Member
#74
Honda-Tech Member
Thread Starter
Re: Bryce's Honda life in Fargo build thread!
I got some perfect condition old school Volk wheels for the crx. I also have Falken RT615s for the rear and BFgoodwench drag radials for the front tires for the volks
A picture from last summer.
interior with some new toys.
Got my rear brakes installed.
A picture from last summer.
interior with some new toys.
Got my rear brakes installed.