1998 Honda Civic Dx -From Ricey to Right-
#52
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
I need some help on the rims guys
I am wanting to do the Itr or Ctr , but that would mean
converting to (4x114 -Dc2 ITR) or 5 lug (Ctr)
I am wanting to do the Itr or Ctr , but that would mean
converting to (4x114 -Dc2 ITR) or 5 lug (Ctr)
#53
Honda-Tech Member
Join Date: Oct 2007
Location: happy ****ing valley
Posts: 2,992
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
I have seen some civics with the ITR rims? How their 4 lug?
And I am welding most holes, but the dumba*s pop-riveted right above the body line, and the welding and grinding can ruin it.
I am more worried about the exterior, and interior for now, I want to have this car looking clean again, then later on I will do an engine swap, but I want to go big, 10-15 psi maybe more? I am shooting for 300-400 horsepower?
I am not an engine guy, one of my friends handles that department on this project, but a built b18 boosted, how much horsepower am I looking at it? and how much psi could it handle if I had major internal upgrades?
Thanks everyone for your support, and thanks to all of you helping with the engine department of this project, I take your thoughts, and opinions into mind
And I am welding most holes, but the dumba*s pop-riveted right above the body line, and the welding and grinding can ruin it.
I am more worried about the exterior, and interior for now, I want to have this car looking clean again, then later on I will do an engine swap, but I want to go big, 10-15 psi maybe more? I am shooting for 300-400 horsepower?
I am not an engine guy, one of my friends handles that department on this project, but a built b18 boosted, how much horsepower am I looking at it? and how much psi could it handle if I had major internal upgrades?
Thanks everyone for your support, and thanks to all of you helping with the engine department of this project, I take your thoughts, and opinions into mind
#54
Honda-Tech Member
Join Date: May 2009
Location: huntsville
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
this is what the guy b4 donald got this car did to this engine
the guy ran cheap as oil in it, thats like the only explanation for this, but tomorrow this will be lookin almost like my head
opie i figured id post these on here for ya buddy i have more **** if you want ill post up everthing i have just lemme know ok
the guy ran cheap as oil in it, thats like the only explanation for this, but tomorrow this will be lookin almost like my head
opie i figured id post these on here for ya buddy i have more **** if you want ill post up everthing i have just lemme know ok
#55
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
#56
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
this is what the guy b4 donald got this car did to this engine
the guy ran cheap as oil in it, thats like the only explanation for this, but tomorrow this will be lookin almost like my head
opie i figured id post these on here for ya buddy i have more **** if you want ill post up everthing i have just lemme know ok
the guy ran cheap as oil in it, thats like the only explanation for this, but tomorrow this will be lookin almost like my head
opie i figured id post these on here for ya buddy i have more **** if you want ill post up everthing i have just lemme know ok
#57
Honda-Tech Member
Join Date: May 2009
Location: huntsville
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
#58
Honda-Tech Member
Join Date: May 2009
Location: huntsville
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
btw opie compare the heads yours=non vtec mine =vtec , look at everything that is different, just tryin to be a helpful friend bud
#59
Honda-Tech Member
Re: 1998 Honda Civic Dx -From Ricey to Right-
Holy ****. Good luck with the head. I didn't even know anything could get that disgusting and I work on 1600dp volkswagen engines. YIKES!
#60
Re: 1998 Honda Civic Dx -From Ricey to Right-
wow, you're un-fu<king an ek coupe. I bet the guy you bought it from would hate you for taking the Supra spoilier off and loosing the 50whp from it LOL. good work man.
#61
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
#62
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
#64
Honda-Tech Member
Join Date: May 2009
Location: huntsville
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
#65
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
#72
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
Well, paint will probably last, but before the swap, I will prime it black and ride like that for a while. I am thinking a red color, though!
#73
Honda-Tech Member
Thread Starter
Join Date: May 2009
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1998 Honda Civic Dx -From Ricey to Right-
Update
So I am going out of town for a week, and I doubt I will find a computer
I did not get around to cleaning the head today, but my gf's step-dad and I built shelves in the garage, and are building a workbench tomorrow. So I am still happy seeing how I have been practically living in the garage. We need the extra space, and with the up-coming wire tuck yes, wire tuck "minor" the work bench will be great!
I will be gone for abot a week, so here is a list of parts, and plans for when I get back , any comments, or info would be great. I am also looking for some coilovers, cheap ones of course.
Exterior
of course, body work is first, I got lucky and I have a family friend that is going to do it super cheap.
We have to grind, and weld all of the pop rivet holes, fix the driver-side quarter panel damage, shave the side moldings, and prime everything black.
Suspension
Interior
There is alot more I am keeping out but this is it for know
Thanks for reading !!
So I am going out of town for a week, and I doubt I will find a computer
I did not get around to cleaning the head today, but my gf's step-dad and I built shelves in the garage, and are building a workbench tomorrow. So I am still happy seeing how I have been practically living in the garage. We need the extra space, and with the up-coming wire tuck yes, wire tuck "minor" the work bench will be great!
I will be gone for abot a week, so here is a list of parts, and plans for when I get back , any comments, or info would be great. I am also looking for some coilovers, cheap ones of course.
Exterior
of course, body work is first, I got lucky and I have a family friend that is going to do it super cheap.
We have to grind, and weld all of the pop rivet holes, fix the driver-side quarter panel damage, shave the side moldings, and prime everything black.
- I still have to order some Ctr headlights, and the Ctr grille.
- Then its on to lips.
- Type-r lips all the way around See the pattern
- Then on to fog lights.
Suspension
- I have a warped lower control arm, so I am going to replace those with either megan racing, or blox.
- Go with asr brace, and undecided sway bar.
- 3- point strut bar for the engine bay, and strut bar for the trunk
- 4- point roll cage, done by a local shop
Interior
- I dont know how many people have done this, but I cannot stand the gray interior, I want to black out all of the interior peices (any advice/ideas)
- gsr seats wrapped in black leather (maybe red stitching??)
- back seats wrapped in black leather (maybe red stitching??)
- type-r shift boot, ****, and steering wheel
There is alot more I am keeping out but this is it for know
Thanks for reading !!
#75
Re: 1998 Honda Civic Dx -From Ricey to Right-
If only Honda Corp knew that there were people restoring a car that costs 18k 10-13 years ago they would just start making the same model again, that be kind of cool to see..