UGR cams?
#151
Honda-Tech Member
Join Date: Jul 2003
Location: western, PA
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
Re: (reddohcvtec)
Had to wait for a new set of ls/vtec dowel pins to come in from Power Rev Racing. I smashed my full-race pins up being careless.
This weekend the car WILL BE RUNNING.
This weekend the car WILL BE RUNNING.
#156
Honda-Tech Member
Join Date: Jul 2003
Location: western, PA
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gakkuken)
ITS ALIVE!!
Got it running last night. Smooth at silk. Gained some low end, lost a lil midrange, and gain a **** TON of topend vs. the Crane Stg II's. (all results were to be expected)
There is no dyno tune on it. Just a .bin from the crane stage II's that i modified a lil bit. Had to pull just a lil bit of fuel in the midrange. but from about 5,600 rpms to 9,500 rpms i had to add a bunch!
On my wideband, the cranes were tuned to a 13.5ish ratio topend and with the juns dropped in I had to stop because they were leaning the motor to mid 17 to one. Got the fuel dialed in quickly via CROME and it pulls nicely.
Between the new valve job (before was just a port and stock valve job and the JUN III copies it is carrying power to 9,500 where the cranes seemed to give up at 8,800 give or take.
maybe next week time permitting i will get a dynojet tune on these with crome and go from there! Haters beware.
Got it running last night. Smooth at silk. Gained some low end, lost a lil midrange, and gain a **** TON of topend vs. the Crane Stg II's. (all results were to be expected)
There is no dyno tune on it. Just a .bin from the crane stage II's that i modified a lil bit. Had to pull just a lil bit of fuel in the midrange. but from about 5,600 rpms to 9,500 rpms i had to add a bunch!
On my wideband, the cranes were tuned to a 13.5ish ratio topend and with the juns dropped in I had to stop because they were leaning the motor to mid 17 to one. Got the fuel dialed in quickly via CROME and it pulls nicely.
Between the new valve job (before was just a port and stock valve job and the JUN III copies it is carrying power to 9,500 where the cranes seemed to give up at 8,800 give or take.
maybe next week time permitting i will get a dynojet tune on these with crome and go from there! Haters beware.
#158
Honda-Tech Member
Join Date: Apr 2005
Location: boston, MA, USA
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tim_adams85)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Used2beAb16 »</TD></TR><TR><TD CLASS="quote">ITS ALIVE!!
Got it running last night. Smooth at silk. Gained some low end, lost a lil midrange, and gain a **** TON of topend vs. the Crane Stg II's. (all results were to be expected)
There is no dyno tune on it. Just a .bin from the crane stage II's that i modified a lil bit. Had to pull just a lil bit of fuel in the midrange. but from about 5,600 rpms to 9,500 rpms i had to add a bunch!
On my wideband, the cranes were tuned to a 13.5ish ratio topend and with the juns dropped in I had to stop because they were leaning the motor to mid 17 to one. Got the fuel dialed in quickly via CROME and it pulls nicely.
Between the new valve job (before was just a port and stock valve job and the JUN III copies it is carrying power to 9,500 where the cranes seemed to give up at 8,800 give or take.
maybe next week time permitting i will get a dynojet tune on these with crome and go from there! Haters beware. </TD></TR></TABLE>
that is definetly the kind of stuff i was expecting to hear god stuff meng good stuff
Got it running last night. Smooth at silk. Gained some low end, lost a lil midrange, and gain a **** TON of topend vs. the Crane Stg II's. (all results were to be expected)
There is no dyno tune on it. Just a .bin from the crane stage II's that i modified a lil bit. Had to pull just a lil bit of fuel in the midrange. but from about 5,600 rpms to 9,500 rpms i had to add a bunch!
On my wideband, the cranes were tuned to a 13.5ish ratio topend and with the juns dropped in I had to stop because they were leaning the motor to mid 17 to one. Got the fuel dialed in quickly via CROME and it pulls nicely.
Between the new valve job (before was just a port and stock valve job and the JUN III copies it is carrying power to 9,500 where the cranes seemed to give up at 8,800 give or take.
maybe next week time permitting i will get a dynojet tune on these with crome and go from there! Haters beware. </TD></TR></TABLE>
that is definetly the kind of stuff i was expecting to hear god stuff meng good stuff
#161
HT White Ops
Re: (xDEFTONESx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDEFTONESx »</TD></TR><TR><TD CLASS="quote">titan has real jun3s for 550. but anyway....glad to see this stuff works. probably what ill use in my next build.</TD></TR></TABLE>
I believe thats per cam though. So it would be 1100 for the set.
I believe thats per cam though. So it would be 1100 for the set.
#162
Honda-Tech Member
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rochesterricer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rochesterricer »</TD></TR><TR><TD CLASS="quote">
I believe thats per cam though. So it would be 1100 for the set.</TD></TR></TABLE>
Correct, just looked it up myself....
http://www.titanmotorsports.com/juntype3cams.html
Lets see a sheet already!
I believe thats per cam though. So it would be 1100 for the set.</TD></TR></TABLE>
Correct, just looked it up myself....
http://www.titanmotorsports.com/juntype3cams.html
Lets see a sheet already!
#163
B*a*n*n*e*d
Join Date: May 2005
Location: Hessian Aggression
Posts: 6,291
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-egb16a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-egb16a »</TD></TR><TR><TD CLASS="quote">
Correct, just looked it up myself....
http://www.titanmotorsports.com/juntype3cams.html
Lets see a sheet already!</TD></TR></TABLE>
oh...my bad. that makes more sense. what a rip.
i glanced at your screen name for a second and thought it said "brokebacktuner"
Correct, just looked it up myself....
http://www.titanmotorsports.com/juntype3cams.html
Lets see a sheet already!</TD></TR></TABLE>
oh...my bad. that makes more sense. what a rip.
i glanced at your screen name for a second and thought it said "brokebacktuner"
#166
Honda-Tech Member
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xDEFTONESx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDEFTONESx »</TD></TR><TR><TD CLASS="quote">
i glanced at your screen name for a second and thought it said "brokebacktuner" </TD></TR></TABLE>
So looks like everyone now knows that you like to ponder some gay cowboy movie(as if people couldn't already tell by the 2nd quote in your sig). hmm, sucks to be you....litterally.
<U>PS: NEVER POST AGAIN!</U>
i glanced at your screen name for a second and thought it said "brokebacktuner" </TD></TR></TABLE>
So looks like everyone now knows that you like to ponder some gay cowboy movie(as if people couldn't already tell by the 2nd quote in your sig). hmm, sucks to be you....litterally.
<U>PS: NEVER POST AGAIN!</U>
#167
B*a*n*n*e*d
Join Date: May 2005
Location: Hessian Aggression
Posts: 6,291
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-egb16a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-egb16a »</TD></TR><TR><TD CLASS="quote">
So looks like everyone now knows that you like to ponder some gay cowboy movie(as if people couldn't already tell by the 2nd quote in your sig). hmm, sucks to be you....litterally.
<U>PS: NEVER POST AGAIN!</U></TD></TR></TABLE>
wow guy, you cant take a joke? who **** in your coat closet this morning? jeeez....dont ruin a 7 page thread by geting all offended over nothing.
So looks like everyone now knows that you like to ponder some gay cowboy movie(as if people couldn't already tell by the 2nd quote in your sig). hmm, sucks to be you....litterally.
<U>PS: NEVER POST AGAIN!</U></TD></TR></TABLE>
wow guy, you cant take a joke? who **** in your coat closet this morning? jeeez....dont ruin a 7 page thread by geting all offended over nothing.
#168
Member
Join Date: May 2005
Location: Macon, GA, U.S.
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-egb16a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-egb16a »</TD></TR><TR><TD CLASS="quote">
<U>PS: NEVER POST AGAIN!</U></TD></TR></TABLE>
Wow ur a douche bag..How bout u never post again....
<U>PS: NEVER POST AGAIN!</U></TD></TR></TABLE>
Wow ur a douche bag..How bout u never post again....
#169
Honda-Tech Member
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xDEFTONESx)
Some how I think if either of your sexualities came into question especially on a public board like this where an unlimited # of people could see that ****(much less by someone you don't even know), whatever it may be, I think you'd want to defend yourself too. It's sort of like making a scammer thread/post and then realizing you mentioned the wrong person/shop and the one you accidently named lost business. Just don't do that **** again, just keep it to yourself.
#170
B*a*n*n*e*d
Join Date: May 2005
Location: Hessian Aggression
Posts: 6,291
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-egb16a)
so youre worried about what people on hater-tech think? wow. becuase someone said brokebacktuner? i still think its kinda funny. maybe you shouldnt take a board so seriously.
to the cams. thats what this is abotu right? the cams! ahaha.
to the cams. thats what this is abotu right? the cams! ahaha.
#171
Honda-Tech Member
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xDEFTONESx)
yes on both counts, and you're right I shouldn't take things so litterally but things like that just **** me off when it is absolutely useless. Where's the sheet already!?!? I really want to see it
#172
Honda-Tech Member
Join Date: Jul 2003
Location: western, PA
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-egb16a)
hopefully this weekend i can get a tune on them. Its not easy when i work 6 days a week. Same reason it took so long to get this thing up and running but it was worth all the hassle.
#173
Honda-Tech Member
Join Date: Jan 2003
Location: Fullerton, ca, usa
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xDEFTONESx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDEFTONESx »</TD></TR><TR><TD CLASS="quote">so youre worried about what people on hater-tech think? wow. becuase someone said brokebacktuner? i still think its kinda funny. maybe you shouldnt take a board so seriously.
to the cams. thats what this is abotu right? the cams! ahaha.</TD></TR></TABLE>
it was funny...and it was a joke.
take it easy broketuner...
to the cams. thats what this is abotu right? the cams! ahaha.</TD></TR></TABLE>
it was funny...and it was a joke.
take it easy broketuner...
#174
Member
Join Date: May 2005
Location: Macon, GA, U.S.
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Used2beAb16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Used2beAb16 »</TD></TR><TR><TD CLASS="quote">hopefully this weekend i can get a tune on them. Its not easy when i work 6 days a week. Same reason it took so long to get this thing up and running but it was worth all the hassle. </TD></TR></TABLE>
Awesome man. Good luck on the tune and im ready to see a sheet!
Awesome man. Good luck on the tune and im ready to see a sheet!