really quick questions before i start...
09-08-2004, 03:31 AM
#1
Thread Starter
Join Date: Aug 2004
Location: Ca
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
really quick questions before i start...
alright guys i have a few questions before i start these projects..
1. i have a blown gsr block and i was going to put in a LS crank and LS rods, what pistons can i use? what will be needed to fit the crank in the block correctly?... do i need to machine anything? will i still be able to use the oil squitters, heard it gets in the way but is there any way around it? how about the gsr block girdle? can i use that?
2. i also have a b20 block and want to put a vtec head on. i just wanted to know if the pr3 pistons will fit properly, if it does, i see that compression is like 11.9, is that too high on stock b20 sleeves? what rods can i use? how is the piston to head clearance?
Modified by b18c_ek at 4:47 AM 9/8/2004
1. i have a blown gsr block and i was going to put in a LS crank and LS rods, what pistons can i use? what will be needed to fit the crank in the block correctly?... do i need to machine anything? will i still be able to use the oil squitters, heard it gets in the way but is there any way around it? how about the gsr block girdle? can i use that?
2. i also have a b20 block and want to put a vtec head on. i just wanted to know if the pr3 pistons will fit properly, if it does, i see that compression is like 11.9, is that too high on stock b20 sleeves? what rods can i use? how is the piston to head clearance?
Modified by b18c_ek at 4:47 AM 9/8/2004
Thread
Thread Starter
Forum
Replies
Last Post