help me decide which cams will get me over 190whp on b16
#76
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: CA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: help me decide which cams will get me over 190whp on b16 (strsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by strsi »</TD></TR><TR><TD CLASS="quote">funny how this came to the top again cuz i posted it so long ago.
anyways, some how this thread got turned into which header i should get instead of cams, but anyways i went with rmf. there is a thread around here showing the results.
as for cams, the general consensus was that i dont have enough displacement or CR to run larger cams so i've decided to stick with my s2s1's. the end. thanks for everyones help </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by todaVTECDA9 »</TD></TR><TR><TD CLASS="quote">m22x.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sa90eg »</TD></TR><TR><TD CLASS="quote">just get a really nice header.....dtr, smsp, hytech,anr,rmf ect.....
i think the header will put you over 200....the cams are good. </TD></TR></TABLE>
does no one read? seems like everyone just reads the first post & responds without reading the entire thread
anyways, some how this thread got turned into which header i should get instead of cams, but anyways i went with rmf. there is a thread around here showing the results.
as for cams, the general consensus was that i dont have enough displacement or CR to run larger cams so i've decided to stick with my s2s1's. the end. thanks for everyones help </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by todaVTECDA9 »</TD></TR><TR><TD CLASS="quote">m22x.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sa90eg »</TD></TR><TR><TD CLASS="quote">just get a really nice header.....dtr, smsp, hytech,anr,rmf ect.....
i think the header will put you over 200....the cams are good. </TD></TR></TABLE>
does no one read? seems like everyone just reads the first post & responds without reading the entire thread
#77
Honda-Tech Member
iTrader: (2)
Join Date: May 2003
Location: POSeRs, NJ, US
Posts: 1,740
Likes: 0
Received 0 Likes
on
0 Posts
Re: help me decide which cams will get me over 190whp on b16 (strsi)
in my b16 STOCK bottom end, made 175whp @ 8300, and 118-122 tq from 6k - 7.5k.
0, 0 on the cam timing with stock headgasket. 23 psi fuel pressure with 370cc injectors (too big)!
Toda B cams, STOCK ITR TB/Mani
When i used a 65mm TB and AEBS manifold i peaked 170whp @ 8900, 115 tq. and this was with 310s and 32 psi fuel pressure.
try CTR cams, or your stage 1s, stock injectors, stock b16 TB/manifold and an ITR manifold and you'll be happy with a good tune and a header with no bigger than 2.25" at the collector throat. this doesn't mean your flange can't be 2.5" where the exhaust bolts to.
mod a B16 exhaust manifold where you would keep the 2.0" outlet, but cut the collector off at the throat and weld a tapered collector out to your exhaust diameter.
you can thank me later.
Modified by JerseySiPOS at 12:11 AM 12/16/2005
0, 0 on the cam timing with stock headgasket. 23 psi fuel pressure with 370cc injectors (too big)!
Toda B cams, STOCK ITR TB/Mani
When i used a 65mm TB and AEBS manifold i peaked 170whp @ 8900, 115 tq. and this was with 310s and 32 psi fuel pressure.
try CTR cams, or your stage 1s, stock injectors, stock b16 TB/manifold and an ITR manifold and you'll be happy with a good tune and a header with no bigger than 2.25" at the collector throat. this doesn't mean your flange can't be 2.5" where the exhaust bolts to.
mod a B16 exhaust manifold where you would keep the 2.0" outlet, but cut the collector off at the throat and weld a tapered collector out to your exhaust diameter.
you can thank me later.
Modified by JerseySiPOS at 12:11 AM 12/16/2005
#78
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: CA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: help me decide which cams will get me over 190whp on b16 (strsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by strsi »</TD></TR><TR><TD CLASS="quote">funny how this came to the top again cuz i posted it so long ago.
anyways, some how this thread got turned into which header i should get instead of cams, but anyways i went with rmf. there is a thread around here showing the results.
as for cams, the general consensus was that i dont have enough displacement or CR to run larger cams so i've decided to stick with my s2s1's. the end. thanks for everyones help </TD></TR></TABLE>
why does this keep coming back up from the dead. already have a conclusion
anyways, some how this thread got turned into which header i should get instead of cams, but anyways i went with rmf. there is a thread around here showing the results.
as for cams, the general consensus was that i dont have enough displacement or CR to run larger cams so i've decided to stick with my s2s1's. the end. thanks for everyones help </TD></TR></TABLE>
why does this keep coming back up from the dead. already have a conclusion
#79
Honda-Tech Member
iTrader: (7)
Join Date: Apr 2005
Location: Between my mind and reality.
Posts: 7,680
Likes: 0
Received 0 Likes
on
0 Posts
Re: help me decide which cams will get me over 190whp on b16 (strsi)
Your thread has become the groundwork for alot of b16a builds. I know b/c Im using the info for my research.
Thread
Thread Starter
Forum
Replies
Last Post
yoorang
All Motor / Naturally Aspirated
17
08-18-2006 10:00 PM