going all motor b-series, need suggestions...
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: dearborn, Michigan, USA
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
going all motor b-series, need suggestions...
hello fellow HT memebers, I currently have a d16z6 in my EG8 ferio, its either I do a b16a2 or ls/vtec swap, for prices I came out with around 2700 for the complete b16a2 swap as for the Lsvtec I dont really know how exspensive it would be considering how im going to find a A1 or B block.... which is a better bet for the money? the b16a2 or the lsvtec? not to technical; sorry if this is in the wrong forum/ thankyou
-profounder
-profounder
#2
well, this exact subject has been covered a billion times, so it would be wise to search. There is limitless info on this question. quick advice, Ls/vtec has more torque, but needs to be built and tuned right. B16 is a great motor with plenty aftermarket support, if your not mechanically inclined, a b16 swap maybe better, just bolt in and go. Moral of the story:
Search, read, research. Inform yourself man.
Search, read, research. Inform yourself man.
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: dearborn, Michigan, USA
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: (808_si)
hey thanks man for not being a dick, I thought I was going to get it worse than that, anyway I appreciate the advice, have a mod delete this thread
#4
Re: going all motor b-series, need suggestions... (Profounder)
go for this....and I have more info on it if needed....
https://honda-tech.com/zerothread?id=1249703
it has CTR internals
https://honda-tech.com/zerothread?id=1249703
it has CTR internals
Thread
Thread Starter
Forum
Replies
Last Post
B18Sleeper
Forced Induction
13
09-09-2008 07:11 PM