jdmspoonitr

iTrader: (1)

We need non-wussy offsets and non-wussy widths

I'll take some 15x7.5 or 15x8 in +20 offset

Kicker773

C & F please...

jetydosa

I already have black TE37s

BlueR

iTrader: (10)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Todd00 &raquo;</TD></TR><TR><TD CLASS="quote">Honestly, you can get lightweight 15x7's and 16x7's everywhere. If you are making a custom order, then why not go for a 15x7.5 or 16x7.5? That extra 1/2" is well worth it, and it might lure a few more folks in.

I might go for a 16x7.5, but a 16x7 is no big deal.

16x7.5", 5x114 +42 would be perfect.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmspoonitr &raquo;</TD></TR><TR><TD CLASS="quote">We need non-wussy offsets and non-wussy widths

I'll take some 15x7.5 or 15x8 in +20 offset</TD></TR></TABLE>

i am sorry but the above is NOT going to happen...

i have been give the choices i listed and those choices ONLY

kid vtecnik

if the 15's are really gonna come in 10 spoke for the ce's then im intrested!

Another Drew

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KnowForever &raquo;</TD></TR><TR><TD CLASS="quote">what kind of price are we looking at?
</TD></TR></TABLE>

Another Drew

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KnowForever &raquo;</TD></TR><TR><TD CLASS="quote">what kind of price are we looking at?
</TD></TR></TABLE>



I'm very interested in 15x7 ET35

BlueR

iTrader: (10)

pricing will be set once i narrow down the choices

again people, please post if you from what i listed on the first page

Todd00

I thought that if you could get 10 people, then Volk would make you about anything you wanted.

thk

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dave-ROR &raquo;</TD></TR><TR><TD CLASS="quote">

I have 17" TE37's sitting in the garage.

Going to run 17x9" +65 front and 17x7.5" +48 rear.

</TD></TR></TABLE>

Bah. 17x9 all around. Do it.

SuperTwinz

15x7s do clear Spoon calipers (on my buddy's car):

BlueR

iTrader: (10)

those are the +43 offset?

can you even fit a piece of paper inbetween there?

SuperTwinz

Yeah they are +43 but 4x100. 1mm clearance between the caliper and spokes.

Speed Infliction

ce28n in 16x7 would be nice. about how much are we talking here?

KOALA YUMMIES

I seriously dont get this, why not buy a used set, or any set and have them powdercoated black with a red lip or some other professional paint job. Its just the finish, the wheels are exactly the same...

Its not like the 15x7/7.5/8" special order Slipstreams, because all those sizes listed are already made by Rays just without the "color". I just sold a set of 15"7 5-lug volks and the only way this would interest me was if it was a custom size as well (15x7.5 or 8").

teamsoy1320

i really wanted these wheels but they have a flat black finish instead of a spoon like matte finish

BlueR

iTrader: (10)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KOALA YUMMIES &raquo;</TD></TR><TR><TD CLASS="quote">I seriously dont get this, why not buy a used set, or any set and have them powdercoated black with a red lip or some other professional paint job. Its just the finish, the wheels are exactly the same...

</TD></TR></TABLE>

how much do you think your method would cost at the end of it all including buying a set of wheels, professional powdercoated, shipping to and from?



please think b4 you start ranting non-sensical bullshit

AoiGSR

I'd have an interest but not part of the 5 lug club

And I won't get 15's either

KOALA YUMMIES

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR &raquo;</TD></TR><TR><TD CLASS="quote">

how much do you think your method would cost at the end of it all including buying a set of wheels, professional powdercoated, shipping to and from?



please think b4 you start ranting non-sensical bullshit

</TD></TR></TABLE>

Buy a set like mine, sold to GK for $950 shipped, mint condition. 15x7" 5x114.3 +43 same exact wheel as stated above. Powderocating incuding full sandblast ~ $200 (I've had wheels powdercoated out here and in the city of Chicago, same prices ($50 a wheel). Done and dead cheaper than a a new set (which best prices I found two years ago new shipped, special order form Japan with a three month wait mind you was $320 shipped a wheel). But its 'non sensical' bullshit fu You're paying for the color black, red stickers and a red stripe when its the same exact wheel. That seems "non sensical" to me and thats just my opinion.

Jon D

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KOALA YUMMIES &raquo;</TD></TR><TR><TD CLASS="quote">

But its non sensical bullshit fu </TD></TR></TABLE>

relax dood... Marc has never done anything but help probably 75% of this board! If you don't think its a good deal then by all means don't include yourself, but keep your negative comments out of the post.

Marc FTW

jdmspoonitr

iTrader: (1)

wow 950 shipped thats a really low price man....i would have kept them if thats all i could get

jdmspoonitr

iTrader: (1)

OK i vote A or D because i like the offsets

thanks for doing this marc!! hows the header??

Dave-ROR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thk &raquo;</TD></TR><TR><TD CLASS="quote">

Bah. 17x9 all around. Do it.</TD></TR></TABLE>



Nah, too much effort.

archmage

I like the ce28n (I have bronze 15x7 ce28n 10-spoke in 5x114.3 (though it says 5 x 100 on it)).

So if I were to get:

15": 15x8
16": 16x8 or 16x8.5 or 16x9

otherwise it's not worthwhile...

I really did want to upgrade to 16's though...but 15's are fine for now.

nholmes

iTrader: (1)

How much are we talking per wheel here?

Like give me a rough idea...

I'm thinking about the CE28N in 16x7, 5x114.3, +42 offset wheels.