ITR brake issue
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2001
Location: Land of Oz, KS
Posts: 2,339
Likes: 0
Received 0 Likes
on
0 Posts
ITR brake issue
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2001
Location: Land of Oz, KS
Posts: 2,339
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR brake issue (Soup ****)
and your positive the brakes were installed properly?
that is the most uneven wear/glazing i have ever seen....
are you using stock spec rotors?
that is the most uneven wear/glazing i have ever seen....
are you using stock spec rotors?
#7
Re: ITR brake issue (Bob#455)
it looks as tho the rotor was made out of two different metals and heated up differently and cause the uneven color, my second thought was the coatings they put on the rotors for shipping and storage so they done rust might have taken toll on the metal.
You stumped me on this
good luck!- did you speak with a Co rep about the problem, maybe they could give you advise on whats happening
You stumped me on this
good luck!- did you speak with a Co rep about the problem, maybe they could give you advise on whats happening
Thread
Thread Starter
Forum
Replies
Last Post
mrlegoman
Road Racing / Autocross & Time Attack
7
01-21-2015 10:12 AM