60 ft times gentlemen
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2001
Location: Montreal, Qc, Canada
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
60 ft times gentlemen
I was wondering if some of you may be able to share your 60 ft time secrets. I have Falken Azenis 205-50-15 on stock rims @ about 20 psi and I cannot get better than a high 2.3 60 ft. I had a few 2.2s with my Potenzas.
Before launching I always do a burn to warm them up a bit (the Potenzas acted like slicks after a burn out they were great) but the Falkens don't seem to grip as well.
What are your secrets?
Before launching I always do a burn to warm them up a bit (the Potenzas acted like slicks after a burn out they were great) but the Falkens don't seem to grip as well.
What are your secrets?
#2
Honda-Tech Member
https://honda-tech.com/zerothread?id=635736
Good info in here
BTW, best 60ft Ive had is 2.1 but that was on BFG drags. I suck at launching though and should be able to get that way down eventually. 2.0-.1's on street tires is pretty good.
Modified by RTW DC2 at 1:13 PM 5/28/2004
Good info in here
BTW, best 60ft Ive had is 2.1 but that was on BFG drags. I suck at launching though and should be able to get that way down eventually. 2.0-.1's on street tires is pretty good.
Modified by RTW DC2 at 1:13 PM 5/28/2004
#4
Honda-Tech Member
Join Date: Jun 2003
Location: Richmond,, British Columbia, Canada
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: 60 ft times gentlemen (DannyITR)
This best 60' time I got was a 2.177 with the azenis on stock rims @ 25 psi launching at 7.5k rpm
Thread
Thread Starter
Forum
Replies
Last Post
sushibug
Road Racing / Autocross & Time Attack
10
05-27-2002 09:18 AM