ok i hVE THE b18c1 MOTOR and never got the timing belt covers when got the motor in peices, now my question is, i can see the triangle mark on the oil pump but what line do i use on crank pulley to time it? i know the white is TDC, but see a red one with a mark on each side of it as well. been at it for a few hours and still dont seem to get it timed just right so please help me out, THANKS! Belt doesnt seem to line up right when i put marks with marks

 

search, this topic has been covered numerous times

 

did and nothing comes up but with timing covers

 

just turn your crank with the crank pulley on it until the markings line up with the marking on the oil pump...i usually line it up with the middle mark on the three red markings which is stock 16 degrees

 

i did it on the white since that was TDC, so try it on the red then?

 

honestly i've done timings on both the markings...and never had any trouble...but i as of today line it up to the 16 degree mark.

 

will try that when there is daylight then

 

yeap goodluck

 

http://www.team-integra.net/sections...ArticleID=1049