i cant remember which side this axle is for (either passenger side or drivers side). its for my 92 integra gsr with manual trans.





Modified by 92integraVTECgsr at 3:48 PM 9/9/2006


Modified by 92integraVTECgsr at 3:49 PM 9/9/2006

 

hahaha flip it around facing to the left....same thing

 

that would be your passenger side which goes into the tranny, some one correct me if im wrong but im almost postive.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lak8 &raquo;</TD></TR><TR><TD CLASS="quote">that would be your passenger side which goes into the tranny, some one correct me if im wrong but im almost postive.</TD></TR></TABLE>

same here

 

Get a full shot, the driver side is longer i ebleive, when you take the old ones at do 1 at a time and compare them...I did the same thing and its nothing hard!

 

Got a better pic? From here, looks like the passenger side.

pass = long
driver = short and goes into the half shaft.

 

lol.. ive changed my axles a ton of times, but just forget lol. and i dont wanna pull one side out and have it be the other side. lol..

im just wanting to know if its the passenger side into the tranny or the drivers side into the half shaft.

 

there added another pic

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lak8 &raquo;</TD></TR><TR><TD CLASS="quote">that would be your passenger side which goes into the tranny, some one correct me if im wrong but im almost postive.</TD></TR></TABLE> Yes SiR the shorter one goes on the tranny side!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92integraVTECgsr &raquo;</TD></TR><TR><TD CLASS="quote">

(either passenger side or drivers side) </TD></TR></TABLE>


hahaha sorry i just found that funny...i don't know if you guys caught that or not.

 

tooks to be the pass side

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CW_98gsr &raquo;</TD></TR><TR><TD CLASS="quote">hahaha flip it around facing to the left....same thing </TD></TR></TABLE>^^This guy, no it's not the same thing^^

 

thanks.. so this axle is the one that goes into the tranny (pass. side). Damn, guess I gotta go order the driver side now.

 

yup!

 

pass side. but will work in driver side i have done it before and never run into problems

 

PASSENGER SIDE

 

both

 

looks like pass side to me, driver is shorter b/c of the half shaft.......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SINFULintegXsi &raquo;</TD></TR><TR><TD CLASS="quote">PASSENGER SIDE</TD></TR></TABLE>

pass side= half spline

driver side= full spline