JDM b18 Hatch

I am putting some lowering springs on a friends car, and we aren't sure what springs go where.


2 of them are tall skinny & 2 of them are short and fat? So what goes where????


Isaac-

allmotorgizzles

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM b18 Hatch &raquo;</TD></TR><TR><TD CLASS="quote">I am putting some lowering springs on a friends car, and we aren't sure what springs go where.


2 of them are tall skinny & 2 of them are short and fat? So what goes where????


Isaac-</TD></TR></TABLE>

just to be shure, this is what you do. take out your stock springs, look at the front and the back. one of them should be longer. then replace that with the longer of the skunk2. get it?

on my dc2, the longer springs go in front, but not shure about eg

Sic_DA_Nine

skinny ones go in front..fat ones go in back

ernald711

sounds like your gonna do this for the first time. i don't know your level of experience but you'll need a spring compressor.

Sic_DA_Nine

if its springs you need a compressor, if its coilovers you dont...

shoot that shizz outta your old shocks!!