I have a 1995 acura integra gsr and I was checking my brake pads today and i noticed that the front passenger side the pads are almost completely out and when i checked the front driver side the pads still have almost most of its life left whats causing this and also sometimes when im braking and i turn the wheel the pedal jumps and feels as if something grinding whats going on with my brake setup anyone????

 

Check the driver side caliper for free motion on the slide pins. The caliper piston could also be seized.

 

its most likely that the piston is seized, if not i would say that your rotors are warped, make sure the slide pins are lubed up with brake grease

 

does it pull to one side when you apply the brakes? if so then the opposite side that its pulling to has problems.

 

na the only thing i noticed is that when im coming to a stop i could feel the rotors i guess the person before didnt cut the rotors when he changed the brakes, so ya but no the problem is only when im braking and i turn the wheel it feels like grinding a lil

 

grinding? my car used to do that then i ripped the brake dust covers off cuz they were junk and so damn noisy. are you pads all the same? replaced the same time? does the piston in the caliper operate normally? check these things...

 

so if my piston is siezed what do i do????And are they any diagram or pictures so i could get a better idea of what of what you are talking about??

 

Look at my signature for a manual.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stevegunit16 &raquo;</TD></TR><TR><TD CLASS="quote">so if my piston is siezed what do i do????And are they any diagram or pictures so i could get a better idea of what of what you are talking about?? </TD></TR></TABLE>

Sometimes you can get away with just taking the piston out and cleaning everything up.

If you don't feel like doing all that, just buy another one