cleaning weld els
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Atlanta GA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
cleaning weld els
how are you guys cleaning your sch 10 els before you weld them? whipe them down with acetone then are you using anything to kinda polish them up a bit before you weld them or no?
#2
Honda-Tech Member
Join Date: Mar 2009
Location: New Castle, Pa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: cleaning weld els
I use a stainless wire wheel on a bench grinder and also use the 3m roloc pads for my angle die grinder scotch brite basically to kinda polish them up.
#3
Honda-Tech Member
Re: cleaning weld els
Just make sure to give it a good stainless wire brushing and wipe with acetone. Don't forget a nice knife edge bevel on the weld joints.
Thread
Thread Starter
Forum
Replies
Last Post
FastCougar
Welding / Fabrication
9
11-27-2006 03:14 PM
BlueShadow
Welding / Fabrication
5
04-28-2005 04:18 PM