instead of glass beading these sch40/10 buttweld pieces, what steps do you take in cleaning them to shine bling bling...

I was thinking cleaning them up and polishing before fabing.... or

 

Wire wheel after your done welding. My pipe is already cleaned, if anything I take acetone to it.

Engloid always said never to use a wire wheel before hand because parts could fall off and lay on the surface.

 

i'm pretty sure you are okay with a wire brush before hand as long as you use a stainless brush for stainless base metal only and not ms.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weiRtech &raquo;</TD></TR><TR><TD CLASS="quote">i'm pretty sure you are okay with a wire brush before hand as long as you use a stainless brush for stainless base metal only and not ms.</TD></TR></TABLE>
yes true...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weiRtech &raquo;</TD></TR><TR><TD CLASS="quote">i'm pretty sure you are okay with a wire brush before hand as long as you use a stainless brush for stainless base metal only and not ms.</TD></TR></TABLE>

Engloid said he would never do it before hand to, I don't question him.

 

you use toilet paper to clean ur butt and it might hurt tryin to weld it