Notices
Tech / Misc Tech topics that don't seem to go elsewhere.

need help with no start condition

Thread Tools
 
Search this Thread
 
Old 11-25-2013, 09:29 AM
  #1  
Honda-Tech Member
Thread Starter
 
scott757's Avatar
 
Join Date: Oct 2011
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default need help with no start condition

my b18c motor has been bogging down lately so I replaced fuel filter , did oil change , new fuel pump , spark plugs and wires also replaced my grounds . after that it ran for a little (bogging less ) n when warm it would die at idle .. it would start with WOT but nothing else and it would still bog . I foubd a vacuum leak and replaced hose yet still same problem .. this leaves me to think the tps , brand new autozone remanufactured dizzy or map sensor bAd .. also the car won't start now and plugs are covered in fuel cranks but won't start
Old 11-25-2013, 09:33 AM
  #2  
Honda-Tech Member
 
Fliptard's Avatar
 
Join Date: Jan 2011
Location: Elkland, PA
Posts: 1,377
Likes: 0
Received 0 Likes on 0 Posts
Default Re: need help with no start condition

check the mechanical timing.

Replace the plugs, wires, dizzy cap and rotor as well
Old 11-25-2013, 09:44 AM
  #3  
Honda-Tech Member
Thread Starter
 
scott757's Avatar
 
Join Date: Oct 2011
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

I have timed the motor again this morning still to no avail waiting for cap and rotor to come in
Old 11-25-2013, 09:47 AM
  #4  
fcm
Old Fart
 
fcm's Avatar
 
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes on 14 Posts
Default Re: need help with no start condition

Sounds like no spark, check coil and ICM. 94
Old 11-27-2013, 11:20 AM
  #5  
Honda-Tech Member
Thread Starter
 
scott757's Avatar
 
Join Date: Oct 2011
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

could a bad icm or coil cause motor bogging at certain loads ? or would that be due to an improperly calibrated tps
Old 11-27-2013, 11:21 AM
  #6  
Honda-Tech Member
Thread Starter
 
scott757's Avatar
 
Join Date: Oct 2011
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

got it started by sanding down terminals on rotor cap still bogs and only starts at wot
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
honda20crx
Honda CRX / EF Civic (1988 - 1991)
9
04-19-2010 12:51 PM
Honda Sport
Honda Prelude
12
06-04-2003 05:27 PM
Spoonin
Tech / Misc
13
05-29-2003 07:23 PM
si00000
Honda Civic / Del Sol (1992 - 2000)
3
11-01-2001 06:10 PM
96whitels
Acura Integra
6
08-19-2001 02:06 AM



Quick Reply: need help with no start condition



All times are GMT -8. The time now is 07:31 PM.