Notices
Tech / Misc Tech topics that don't seem to go elsewhere.

Idle is messing up

Thread Tools
 
Search this Thread
 
Old 08-15-2005, 07:41 AM
  #1  
Thread Starter
 
B bOy CrAyOn's Avatar
 
Join Date: Feb 2005
Location: Sacramento, CA, United States
Posts: 423
Likes: 0
Received 0 Likes on 0 Posts
Default Idle is messing up

I own a 93 EG wit a jdm b16 and ur basic bolt ons and a lil more but no internal work..... its alway drove fine and given me no problems but about 2 weeks ago the idle keeps fluctuating when i stop at a light or any time im idling... it will idle fine till the car warms up...once the engine is warmed up and should be running great it will idle at 700 or 500 or 1,000 or 100 .... and itll change through all these idle positions within maybe a 3 block radius of stop and go traffic... and if im driving around 50 or higher or any speed actually and i put it in neutral and coast to a stop somtimes it will totally just turn off and i have to turn the car on again... cuzz the car seems to idle at 100 a lot now... wich in my perspective i thought the car should turn off at that low of a rpm.... anyone know what it could be?
Old 08-15-2005, 10:39 AM
  #2  
Junior Member
 
zman's Avatar
 
Join Date: Feb 2004
Location: Hamilton, ON, Canada
Posts: 551
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Idle is messing up (B bOy CrAyOn)

idle air control valve on the back of the intake manifold....very common problem. Take it off and clean the screen, if that doesn't work get a new one, or a used one that works....they aren't cheap from honda.
Old 08-15-2005, 11:05 AM
  #3  
Thread Starter
 
B bOy CrAyOn's Avatar
 
Join Date: Feb 2005
Location: Sacramento, CA, United States
Posts: 423
Likes: 0
Received 0 Likes on 0 Posts
Default

i have a skunk2 intake manifold so would it be any different?..prolly not... just for a lil more help what does the idle control valve look like and how do i take it off?
Old 08-15-2005, 11:13 AM
  #4  
Thread Starter
 
B bOy CrAyOn's Avatar
 
Join Date: Feb 2005
Location: Sacramento, CA, United States
Posts: 423
Likes: 0
Received 0 Likes on 0 Posts
Default

nvm i think i found it....it has some hoses that go in to it ad a sensor i think and bolted up by 2 bolts... so ill take it off and clean it
Old 08-15-2005, 12:08 PM
  #5  
Thread Starter
 
B bOy CrAyOn's Avatar
 
Join Date: Feb 2005
Location: Sacramento, CA, United States
Posts: 423
Likes: 0
Received 0 Likes on 0 Posts
Default

ok i cleaned it and it was super clean and all..i took my car for a ride... and its still doing the same thing....what else could it be?
Old 08-15-2005, 12:38 PM
  #6  
Junior Member
 
zman's Avatar
 
Join Date: Feb 2004
Location: Hamilton, ON, Canada
Posts: 551
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (B bOy CrAyOn)

well cleaning it doesn't always fix the problem. Try replacing it with a known working one....lots of other honda ones fit, there is one with wide bolt holes and there is one with closer bolt holes, and some have 2 wires and others have 3. I am currently using a 91 integra IACV on my 2nd gen b16.
Old 08-20-2005, 03:31 AM
  #7  
 
i_kick_turtles's Avatar
 
Join Date: May 2005
Location: Milford, NE
Posts: 681
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (zman)

make sure to check for any leaky or cracked hoses. also take the radiator cap off and let the car idle for a long time.
Old 08-21-2005, 09:48 AM
  #8  
 
jdm420da6's Avatar
 
Join Date: Feb 2004
Location: usa
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (I R Tylor)

im having troubles with idling myself...it idles way too high, like 16-2100 rpms...at a light...talk about killer fuel economy...anyway...u think leaving the rad. cap off for awhile will help any?
Old 08-21-2005, 09:34 PM
  #9  
 
i_kick_turtles's Avatar
 
Join Date: May 2005
Location: Milford, NE
Posts: 681
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (jdm420da6)

if it fluctuates its sometimes just air in the cooling system. you can bleed it with the screw or just idle with the cap off. if it's just going to high its probably something else. have you worked on the throttlebody recently?
Old 08-22-2005, 04:18 PM
  #10  
 
jdm420da6's Avatar
 
Join Date: Feb 2004
Location: usa
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (I R Tylor)

i noticed that when i push on the throttle plate some it goes down..but not enough...i even tried cleaning it and it doesnt help...i dunno what else to check for
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VTECwalka
Honda Civic / Del Sol (1992 - 2000)
2
11-04-2012 06:58 PM
B bOy CrAyOn
All Motor / Naturally Aspirated
2
08-15-2005 02:01 PM
raene
Tech / Misc
15
11-07-2002 08:21 PM



Quick Reply: Idle is messing up



All times are GMT -8. The time now is 06:20 PM.