HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!!
10-02-2002, 02:23 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: East Coast
Posts: 2,015
Likes: 0
Received 0 Likes
on
0 Posts
HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!!
liek the topic says, im bought an exedy clutch 90-91 integra trans and the clutch wont mate up with the b18b1 flywheel. the dowel holes are in different positions. Is the b18b1 and b18a1 flywheel different? will a 92 93 b18a1 flywheel work anyone had this problem in their crx/integra swaps or its jsut i happend to have a b18b block with a 90 91 ls tranny that wont fit.
[Modified by Giovannie, 11:25 PM 10/2/2002]
[Modified by Giovannie, 11:25 PM 10/2/2002]
10-03-2002, 12:43 PM
#2
Honda-Tech Member
Join Date: Mar 2002
Location: NoVA, VA, USofA
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!! (Giovannie)
u need the clutch kit for the cable operated cars, b18b is hydraulic, b18a is cable
10-03-2002, 01:27 PM
#3
Honda-Tech Member
Join Date: Feb 2002
Location: Dandridge, TN, USA
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!! (Giovannie)
the dowel pins do go a certain way. have you rotated it?
when i put my exedy clutch on my CM flywheel, it did take a little persuasion (rubber mallet). one dowel pin was off slightly.
hydraulic and cable should have nothing to do with it.
when i put my exedy clutch on my CM flywheel, it did take a little persuasion (rubber mallet). one dowel pin was off slightly.
hydraulic and cable should have nothing to do with it.
10-03-2002, 02:22 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: East Coast
Posts: 2,015
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!! (Jeff C)
the dowel pins do go a certain way. have you rotated it?
when i put my exedy clutch on my CM flywheel, it did take a little persuasion (rubber mallet). one dowel pin was off slightly.
hydraulic and cable should have nothing to do with it.
when i put my exedy clutch on my CM flywheel, it did take a little persuasion (rubber mallet). one dowel pin was off slightly.
hydraulic and cable should have nothing to do with it.
10-03-2002, 02:36 PM
#5
Honda-Tech Member
Re: HELP! b18b1 flywheel wont mate with 90-91 LS/b16 exedy clutch!! (Giovannie)
if you get stuck hard I have 2 B18A flywheels I'm not using. Email me if you need one. zip 45219
Thread
Thread Starter
Forum
Replies
Last Post
Jonny Rocket
Honda CRX / EF Civic (1988 - 1991)
5
05-18-2009 09:03 AM
impreziv
Honda CRX / EF Civic (1988 - 1991)
4
07-20-2008 10:53 AM
Origin
Tech / Misc
9
09-11-2005 08:00 PM
