Has anyone converted 98 harness to 95 harness ecu plugs only
07-31-2003, 06:03 PM
#1
Thread Starter
Join Date: Jan 2003
Location: Matrix
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone converted 98 harness to 95 harness ecu plugs only
anyone ....i did one today and when i start the car it misses constantly
i know there is another kinda crank trigger on the crank i dont know what purpose it serves ...
has anyone done this ...am i missing somethin ...i had two wire diagrams side by side ...i thought i had it done right
i know i got the tdc cyp and cpk ...wires done correctly ...
Uggh
thanks in advance
i know there is another kinda crank trigger on the crank i dont know what purpose it serves ...
has anyone done this ...am i missing somethin ...i had two wire diagrams side by side ...i thought i had it done right
i know i got the tdc cyp and cpk ...wires done correctly ...
Uggh
thanks in advance
07-31-2003, 09:41 PM
#4
Join Date: Jul 2003
Location: San Diego, Ca, USA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone converted 98 harness to 95 harness ecu plugs only (K20 EG)
On the OBD2 motors, the crank angle sensor is located on the block itself. That is the sensor you see.
On the OBD1 motors, the crank angle sensor is located inside the distributor.
Just rewire accordingly and it should fix the problem.
On the OBD1 motors, the crank angle sensor is located inside the distributor.
Just rewire accordingly and it should fix the problem.
07-31-2003, 11:48 PM
#5
Thread Starter
Join Date: Jan 2003
Location: Matrix
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone converted 98 harness to 95 harness ecu plugs only (deepstaged)
should i be going in the direction of the way the harness is in the engine compartment or the ecu location
08-01-2003, 04:25 AM
#6
Honda-Tech Member
Re: Has anyone converted 98 harness to 95 harness ecu plugs only (deepstaged)
OBD2 engines integrated a Crankshaft Fluctuation sensor for misfire detection, which is located by the oil pump.
They [OBD2] distributors have always had a Crank Position sensor, as well as the TDC and CYL sensors.
They [OBD2] distributors have always had a Crank Position sensor, as well as the TDC and CYL sensors.
08-03-2003, 11:50 AM
#7
Honda-Tech Member
Join Date: Aug 2002
Location: too busy to make carbon parts
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone converted 98 harness to 95 harness ecu plugs only (EE_Chris)
Did you change the ECU plugs yourself or use an adapter harness?
Trending Topics
08-04-2003, 03:39 AM
#8
Thread Starter
Join Date: Jan 2003
Location: Matrix
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone converted 98 harness to 95 harness ecu plugs only (Fabrik8)
i changed the Ecu plugs myself
pain in the *** ...
Hot weather outside
Hot soldering iron
bad mix
pain in the *** ...
Hot weather outside
Hot soldering iron
bad mix
Thread
Thread Starter
Forum
Replies
Last Post
Slammerdc2
Honda Civic / Del Sol (1992 - 2000)
6
10-22-2016 05:16 AM
SlowSOHC-T
Honda Civic / Del Sol (1992 - 2000)
5
12-13-2007 11:46 AM
MrAngry
Tech / Misc
10
09-13-2005 05:05 PM
MrAngry
Acura Integra
6
09-05-2005 05:03 PM
