Midwestrider

I am looking for the most needed gauges for a nitrous setup (with the execption of the nitrous gauge).
I have a wet kit. I have the norm.. I/H/E, fuel rail(aem), fpr(aem), and fuel gauge.
The motor is a sohc, D16. I will be soon swap in a DOHC.
From doing some searching on the site here, the 3 gauges for a all motor are:

oil press, oil temp, and water press,

I have space for 5 gauges, (2) in dash bezel, and (3) on the pillar.
I was looking at a greddy a/f, egt, water temp, oil press, oil temp.

Another question has anyone be able to dremel a autometer (triple) 2-1/16 pod to fit a 60mm gauge?
Reason I ask cause I would like to install the greddy a/f (only comes in 60mm) and egt (60mm) in the pillar pod and put a 52mm gauge in the last opening.
And then put (2) 52mm in the bezel.

What 5 gauges would be best suited for what I have mentioned?
thx

Eric

CanadaCivicSIR

I have in my car: A/F guage, Oil Pressure, Fuel Pressure, EGT and Nitrous Pressure.

Midwestrider

You wouldn't happen to have any pics of your gauges installed would you?
What model gauges are you using?

Thanks

CanadaCivicSIR

No pics right now,scanner busted!!!!

I have AutoMeter guages Phantom series(I like the white faces)

EGT, Nitrous pressure and Fuel Pressure on A pillar in triple guage mount. Oil pressure and A/F guage in instrument cluster.

Midwestrider

Thx man
Anyone else??