Building bottom end for my F20B
11-17-2003, 12:37 PM
#1
Thread Starter
Join Date: Nov 2003
Location: Toronto, Ontario, canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Building bottom end for my F20B
I just purchased a hybrid T3/T04E with Spearco intercooler and etc. I want to set my boost at around 16 to 20psi. My goal is at least 400 whp.
I now have to build my bottom end and I was quoted some number at Arias and Race Engineering for complete forged Pistons and aluminum rods. They have to custom fabricate them because they don't stock my F20B internals.
Is there any cheaper way or other manufacturers that provide parts for F20B?
Also, where can I get head gasket for this engine? I don't think an F22a would fit.
Any help in this matter would be highly appreciated.
I now have to build my bottom end and I was quoted some number at Arias and Race Engineering for complete forged Pistons and aluminum rods. They have to custom fabricate them because they don't stock my F20B internals.
Is there any cheaper way or other manufacturers that provide parts for F20B?
Also, where can I get head gasket for this engine? I don't think an F22a would fit.
Any help in this matter would be highly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
