how do i wire the si cd player in my integra???
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: texas, usa
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
how do i wire the si cd player in my integra???
i got the si cd player for my teg to go with my type r guage cluster cuz it is amber so what is the wiring for the cd player i got the harness but 1 wire doesnt match up??help pleeze
#3
Honda-Tech Member
Join Date: May 2004
Location: Portland, OR, USA
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
Re: how do i wire the si cd player in my integra??? (b18_crx)
take your stock deck or find a stock one. Cut the plug off the back of it. cut the plug off the SI cd player and match up the wires and connect them properly.
should be fairly simple.
constant power, ignition signal, ground, light ilumination, remote wire, +/- front left speaker, +/- front right, +/- rear left, +/- rear right. that should be it.
just find which one is witch for the Si deck and which one is which for the Integra plug and connect them together. If you need diagram for the Integra hit me up.
should be fairly simple.
constant power, ignition signal, ground, light ilumination, remote wire, +/- front left speaker, +/- front right, +/- rear left, +/- rear right. that should be it.
just find which one is witch for the Si deck and which one is which for the Integra plug and connect them together. If you need diagram for the Integra hit me up.
Thread
Thread Starter
Forum
Replies
Last Post