knock sensor code help??????????????????????????????????????????
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: dacono, colorado, USA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
knock sensor code help??????????????????????????????????????????
i am throweing a knock sensor code but im stilll hiting vtec wht the expletive is up with that and im also havea code 2 witch is o2 should i change it and my ks is starting to freak me out cuz im suffing massive power loss on my b16a so im not driving it
#2
Honda-Tech Member
Re: knock sensor code help?????????????????????????????????????????? (ten second crx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ten second crx »</TD></TR><TR><TD CLASS="quote">i am throweing a knock sensor code but im stilll hiting vtec wht the expletive is up with that and im also havea code 2 witch is o2 should i change it and my ks is starting to freak me out cuz im suffing massive power loss on my b16a so im not driving it </TD></TR></TABLE>
mods done to it, blah blah blah. give us details about the enigne. help us help you.
mods done to it, blah blah blah. give us details about the enigne. help us help you.
#3
Honda-Tech Member
Join Date: Jan 2002
Location: Haltom City, Tx, USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I've always been under the impression that throwing a knock sensor code will put your fuel and ignition curves in safe mode meaning (no performance) I am pretty sure you would still be able to hit vtec but if you are detonating you might want to find out why and correct it before you have to replace a bearing and or con rod.
#4
Honda-Tech Member
Join Date: Oct 2003
Location: feed us
Posts: 6,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Haltom Hatch)
it retards your timing when you throw a knock sensor code. get a chipped p28 and eliminate the knock sensor so you dont throw the code anymore
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2005
Location: dacono, colorado, USA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dohcMONSTER)
i have a stock b16a with a pw0 ecu and a p28 wont work with the obd0 motor unless i get the harness witch i have and the ecu is a piece of **** i hate that program i blow to much **** up with it so should i just have it replaced or chiup the pw0 ecu
Thread
Thread Starter
Forum
Replies
Last Post
Grip
Honda Civic / Del Sol (1992 - 2000)
5
07-13-2004 08:43 AM
TRhatchCRAP
Honda CRX / EF Civic (1988 - 1991)
10
08-10-2003 11:52 AM