Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 6
1
2
3
Last »
Search: Posts Made By: bmxtrev
Showing results 1 to 25 of 144
Search took 0.48 seconds.
Forum: Audio / Security / Video
01-10-2015, 09:38 PM
Replies: 8
Views: 10,998
Posted By bmxtrev

Re: DIY: Using a Factory Dash Button as a Fuel Pump Cutoff

thanks everyone! glad to help.




No prob! yep, if you use more than one switch, just connect them all in series (one after another; power - switch - wire - switch - wire - ). When the first...
Forum: Audio / Security / Video
01-04-2015, 02:42 PM
Replies: 8
Views: 10,998
Posted By bmxtrev

Icon6 DIY: Using a Factory Dash Button as a Fuel Pump Cutoff

It's like push to start x 0.5

This is my write-up on how to turn an unused button or switch on your dash into a fuel pump cutoff switch.

You're going to need:

-A relay switch that can handle...
Forum: Honda CRX / EF Civic (1988 - 1991)
11-13-2013, 12:55 PM
Replies: 3
Views: 1,030
Posted By bmxtrev

I was gonna say cracked dizzy. My ls swapped ef...

I was gonna say cracked dizzy. My ls swapped ef has the same problem. Moisture gets into the dizzy I think. I figured this out because the bogging/misfiring happens way more often after it rains....
Forum: Audio / Security / Video
06-29-2013, 04:53 PM
Replies: 1
Views: 5,183
Posted By bmxtrev

radio fuse blowing out, weak/distorted sub signal

i have a 1988 honda civic. i've had a single 10 inch sub setup for about a year now and never had any problems until about a week ago. there was alternator whine and a really dirty signal coming...
Forum: Honda CRX / EF Civic (1988 - 1991)
06-04-2013, 03:48 PM
Replies: 0
Views: 578
Posted By bmxtrev

idling/ sputtering/ bad ground?

-LS b18 obd0, stock everything, pr4 ecu


-constant alternator whine through my subwoofer, subwoofer ground is good.

-static "pop" noise from the sub whenever i use blinkers, turn lights on, or...
Forum: Honda CRX / EF Civic (1988 - 1991)
02-02-2013, 10:08 AM
Replies: 34
Views: 20,657
Posted By bmxtrev

Re: 88-91 CRX/EF Civic Picture & Video Thread (NO COMMENTS)

http://i282.photobucket.com/albums/kk268/bmxtrev/3rd_zps7fc02c83.jpg
Forum: Suspension & Brakes
01-16-2013, 12:51 PM
Replies: 34
Views: 2,751
Posted By bmxtrev

Re: Function and form type 1 on efs

i'm talking about FF's, not Koni/GC. On the EF/ED Chassis, you can lay frame in the rear and still have more to go, without altering anything.

for the fronts, just swap out the top hats for the...
Forum: Suspension & Brakes
01-15-2013, 05:18 PM
Replies: 34
Views: 2,751
Posted By bmxtrev

Re: Function and form type 1 on efs

wrong. use the stock top hats on the fronts. with 15's you'll be about an inch away from tucking rim. rear end has no problems getting low
Forum: Honda CRX / EF Civic (1988 - 1991)
06-28-2012, 09:17 PM
Replies: 4
Views: 2,123
Posted By bmxtrev

Re: b18a obd0 o2 sensor wiring question

^thank you! ill check that ground. if its bad the o2 could be building up interference and throwing that code..
Forum: Honda CRX / EF Civic (1988 - 1991)
06-28-2012, 08:09 PM
Replies: 4
Views: 2,123
Posted By bmxtrev

Re: b18a obd0 o2 sensor wiring question

so i should keep the brown/blk wire connected to the o2 wire? where exactly does the brown/blk wire go? maybe the ground is bad...
Forum: Honda CRX / EF Civic (1988 - 1991)
06-28-2012, 07:04 PM
Replies: 4
Views: 2,123
Posted By bmxtrev

b18a obd0 o2 sensor wiring question

alright, so i'm going to rewire my o2 sensor. It's just a single wire sensor for OBD0. but when i look at how i have it wired now (in an EF civic, PR4 ecu), the white wire (the only o2 wire) runs...
Forum: Honda CRX / EF Civic (1988 - 1991)
06-01-2012, 11:32 PM
Replies: 2
Views: 2,968
Posted By bmxtrev

Re: OBD0 Codes 1 and 43 - O2 sensor Question

code 1 is gone now, and the car drives great, until the CEL comes on. It always comes on right when the engine reaches its normal operating temp, with code 43. And RIGHT when the CEL comes on with...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-31-2012, 11:14 PM
Replies: 2
Views: 2,968
Posted By bmxtrev

OBD0 Codes 1 and 43 - O2 sensor Question

stock b18a1
OBD0
PR4 ECU
DPFI to MPFI


Alright, so im throwing a code 43 (4 long, 3 short), which is fuel supply system, and I have had this code since I swapped last year. Apparently people...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-30-2012, 10:21 AM
Replies: 5
Views: 1,287
Posted By bmxtrev

Re: b18a gutless under 4k rpm, bad throttle resolution

idles perfect, right around 800 rpm. no fluctuation or hunting. someone mentioned it could be bad spark plug wires causing the problem. could it be?
Forum: Honda CRX / EF Civic (1988 - 1991)
05-28-2012, 02:15 PM
Replies: 5
Views: 1,287
Posted By bmxtrev

Re: b18a gutless under 4k rpm, bad throttle resolution

its an obd0 engine, b18a1, running on the stock pr4 ecu.
Forum: Honda CRX / EF Civic (1988 - 1991)
05-27-2012, 06:57 PM
Replies: 5
Views: 1,287
Posted By bmxtrev

b18a gutless under 4k rpm, bad throttle resolution

i have a b18a, obd0 LS in my ef hatch. at low rpms, (under 4k) i have a very noticeable loss in power, almost like its bogging (doesnt sputter though), and will have to down shift to accelerate up a...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-20-2012, 10:38 AM
Replies: 1,158
Views: 409,735
Posted By bmxtrev

Re: ► ► for sale / would like to buy 88-91 crx/civic parts only◄◄

FS: AUTO EF civic cluster. 88/89 style. asking $30 plus shipping. pm me
http://sphotos.xx.fbcdn.net/hphotos-ash3/558595_4053395216009_1315903730_3766867_2113271324_n.jpg
Forum: Honda CRX / EF Civic (1988 - 1991)
05-17-2012, 01:59 PM
Replies: 49
Views: 3,077
Posted By bmxtrev

Re: My new sedan. only 38k original miles

lol, 938,xxx miles? nice
Forum: Suspension & Brakes
04-11-2012, 11:45 AM
Replies: 7
Views: 3,983
Posted By bmxtrev

Re: best front UCA replacement bushings?

there was zero play at 12 and 6 on the front wheels, but after i started hearing squeaking, thats when i noticed play, and the car pulling to the right very slightly (day after installing parts and...
Forum: Suspension & Brakes
04-09-2012, 06:34 PM
Replies: 7
Views: 3,983
Posted By bmxtrev

Re: best front UCA replacement bushings?

but why would there be play when i push/pull the front wheels at 6 and 12?

anyone tried energy suspension poly UCA bushings?
http://www.energysuspensionparts.com...rod=16%2E3103#

also, if...
Forum: Suspension & Brakes
04-09-2012, 12:59 PM
Replies: 7
Views: 3,983
Posted By bmxtrev

best front UCA replacement bushings?

I installed some stock replacement front UCA's on my EF, got it aligned, and 2 days later, now I am hearing squeaking with shock movement up front, and i can wiggle the front wheels at 12 and 6 quite...
Forum: Honda CRX / EF Civic (1988 - 1991)
03-27-2012, 06:51 PM
Replies: 95
Views: 75,284
Posted By bmxtrev

Re: FAQ: DIY: How-to: Fuel Pump Cut Off Switch

so if im using a relay, it can have any amp rating above 20 amps, but must be a 12v right?
Forum: Suspension & Brakes
03-22-2012, 12:55 PM
Replies: 28
Views: 4,132
Posted By bmxtrev

Re: Ebay front UCA quality?

in a very unclear and inefficient form. I must assume you are being sarcastic and not a moron to gain any information. thanks " "bro" "
Forum: Suspension & Brakes
03-22-2012, 12:48 PM
Replies: 28
Views: 4,132
Posted By bmxtrev

Re: Ebay front UCA quality?

well if they are up to par with oe replacements, then i would get the ebay ones as they are cheaper. I didn't know they weren't and thats why i asked to find out. thats how a question works bro.
Showing results 1 to 25 of 144
 
Page 1 of 6
1
2
3
Last »


 
Forum Jump


All times are GMT -8. The time now is 04:01 PM.