Notices
 
Search: Posts Made By: skuded
Showing results 1 to 25 of 246
Search took 0.63 seconds.
10-25-2012, 06:59 PM
Replies: 7
Views: 3,816
Posted By skuded

Re: running rich, wont start, help!

well plugs were a good cheap starting point, first induce a vacuum leak by pulling off the brake booster hose off the intake, and try and start it up, if no change or worse, put the hose back on and...
10-25-2012, 06:44 PM
Replies: 11
Views: 2,257
Posted By skuded

Re: Gsr stalling when given gas

you should just go buy a new distributor from any aftermarket store that offers a lifetime warranty, believe me i replaced mine twice in one year, cost is somewhere between 200-300$
10-14-2012, 06:28 PM
Replies: 9
Views: 1,205
Posted By skuded

Re: car wont move, help please

you need to pull out the new axle and compare the old with the new make sure they are the same exactly, if the car goes into gear fine then the clutch should be working perfectly fine, pull the axle...
10-14-2012, 06:12 PM
Replies: 45
Views: 8,543
Posted By skuded

Re: My Ej7 Progress (97 Civic)

the car is clean as hell man, job well done, by far the best looking body style of civic in my opinion and you brought that thing back to life for sure, i used to have those wheels in gold, but they...
10-14-2012, 06:04 PM
Replies: 7
Views: 3,816
Posted By skuded

Re: running rich, wont start, help!

throw those shitty e3 plugs in the trash and go buy oem NGK spark plugs, these plugs will cause huge driveability problems, it doesnt matter if they are new or not
10-14-2012, 05:59 PM
Replies: 3
Views: 935
Posted By skuded

Re: 2000 civic Si starting problem

at what rpm does it idle? i have heard this growling noise in an intake when idle drops so low that the engine dies, if idle is running really low your o2 readings will not be accurate, but your iacv...
10-14-2012, 05:52 PM
Replies: 2
Views: 4,191
Posted By skuded

Re: DOME LIGHT FUSE BLOWNLED 98 civic coupe

if its blowing a 10 amp fuse for an led light which shouldnt require many amps to run, i would say you have a short in the wiring somewhere, you should check your wiring first, you could use any size...
10-14-2012, 05:49 PM
Replies: 25
Views: 2,428
Posted By skuded

Re: vtec not working properly

Why dont you buy a cheap toggle switch and spool of wire and bypass the ecu and use a toggle for the vtec soleniod, for testing purposes this seems like a good start
10-06-2012, 03:54 PM
Replies: 25
Views: 2,428
Posted By skuded

Re: vtec not working properly

Have you checked the vtec oil pressure switch, maybe it has something to do with that, the car gets warmed all the way up oil pressure does drop off some this drop in oil pressure compared to oil...
10-06-2012, 03:20 PM
Replies: 16
Views: 1,765
Posted By skuded

Re: 94 Coupe/GSR swap - horrible gas mileage and cracked distributor cap

I would start by replacing the plugs with the proper ngk's i think its bkr8's i may be way off on that its been a while but thats the proper ngk plug for your motor, if you already have the correct...
09-30-2012, 05:41 PM
Replies: 29
Views: 2,966
Posted By skuded

Re: Uncorking a 93 Civic VX - I want to open the airflow a little bit

what is the main difference between the vx and a dx? i have a 92dx that is pretty well worn out, and it gets pretty good gas mileage like around 35-40mpg but nowhere near 50+
09-30-2012, 05:32 PM
Replies: 27
Views: 3,013
Posted By skuded

Re: my first honda build!

damn man, i miss those days, of course my pockets were never as deep, but i miss the building process, its always fun putting something together and experiencing the finished product, what are you...
09-30-2012, 05:17 PM
Replies: 16
Views: 2,060
Posted By skuded

Re: issue with current rims and what are my options? 95 civic lx

you could just have serious alignment issues as far as the wear on the inside and outside, one could be toe the other could be camber, as far as the wheels hopping, i would stick them on a balancer...
09-30-2012, 05:06 PM
Replies: 25
Views: 2,428
Posted By skuded

Re: vtec not working properly

I had a similar issue before, i would pay close attention to coolant temperature at what temps it cuts out, i had a blown head gasket issue in my boosted gsr that seemed to be doing similar things,...
09-27-2012, 10:41 PM
Replies: 11
Views: 22,099
Posted By skuded

Re: P1508 - How common is ECU failure?

I think you need to watch your live data and wiggle all your connections at your problem areas also at the pcm connector and your main harnesses, see if data changed like bad connection or if you...
09-23-2012, 05:48 PM
Replies: 80
Views: 33,707
Posted By skuded

Re: Thmanx's R-DOT B18C5 project

Subscribed man, good luck with the car, i support your idea 100%, and i have to say personally going from k series back to b series myself, the k series is an excellent platform, But I will go B...
Forum: Acura Integra
09-16-2011, 06:18 AM
Replies: 0
Views: 2,394
Posted By skuded

2000 gsr p1456, clear code then flashes cyl 4 misfire

its a 2000 gsr runs great, has a p1456 evap code, when i clear the code automatically the check engine light starts flashing code p0304 and stays flashing until i turn the car off, the car doesnt...
07-17-2011, 08:41 AM
Replies: 3
Views: 1,031
Posted By skuded

Re: codes 8 and 9, car shutting off intermittently

its a 92 civic dx 1.5, so your saying the wiring between the internal parts, and the connector on the outside of the distributor is the main suspect, cause the wiring seems to be ok, i have done...
07-17-2011, 06:13 AM
Replies: 3
Views: 1,031
Posted By skuded

codes 8 and 9, car shutting off intermittently

i replaced the ignition coil a about a month ago when the car died on me and cranked but didnt start, it fixed the problem for a while, but the code started throwing 8 and 9 again and now its dieing...
06-17-2011, 10:26 AM
Replies: 6
Views: 2,337
Posted By skuded

Re: fuel cut and cel, cant pull codes obd1 need help

I will look into all that, thanks for the advice, what car did the p28 come out of?
06-17-2011, 09:28 AM
Replies: 6
Views: 2,337
Posted By skuded

Re: fuel cut and cel, cant pull codes obd1 need help

My laptop is broken at the time, but my modis has the obd1 connector that plugs into the 3 pin connector next to the ecm, it just wont communicate, and im not sure if its because hondata is installed...
06-16-2011, 06:37 PM
Replies: 6
Views: 2,337
Posted By skuded

Re: fuel cut and cel, cant pull codes obd1 need help

Ok I know that was a lot of info, but has anyone had any problems with using hondata s300 and a p 28 ecm, or has anyone had problems reading cels with hondata
06-16-2011, 05:03 PM
Replies: 6
Views: 2,337
Posted By skuded

fuel cut and cel, cant pull codes obd1 need help

my car is a gsr on 9 lbs, it runs good most of the time, until i drive for an extended period of time, if i drive on the highway for usually more than 10 miles the cel comes on, and under wot i will...
05-15-2011, 05:50 PM
Replies: 5
Views: 1,955
Posted By skuded

Re: in depth a/c question, alternative oem condensor fan?

what exactly are you talking about when you say the evaporator coil, you mean the expansion valve, because there are no wires to the expansion valve, could you elaborate on what your describing, im...
05-09-2011, 05:47 AM
Replies: 5
Views: 1,955
Posted By skuded

Re: in depth a/c question, alternative oem condensor fan?

i work on cars for a living, so i know i have flushed the system correctly, and i have pulled multiple vacuum for hours multiple times, and i have charged it to capacity, my question is not in that,...
Showing results 1 to 25 of 246
 


 
Forum Jump


All times are GMT -8. The time now is 08:57 PM.