Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: h8tred
Showing results 1 to 25 of 497
Search took 1.39 seconds.
Forum: Honda CRX / EF Civic (1988 - 1991)
09-16-2008, 01:11 PM
Replies: 6
Views: 3,186
Posted By h8tred

Re: water leaking from door speakers (phoenix_iii)

The above posted could help, but it's not the cause of the issue. Mine didn't start doing it until I put a passenger side mirror on. So check your mirror gaskets.
Forum: Honda CRX / EF Civic (1988 - 1991)
08-12-2008, 11:14 AM
Replies: 5
Views: 428
Posted By h8tred

Re: no power when giving it gas (driftam1)

It's a Honda haha. That's your problem...

Sounds like you're on the right track though, it sounds to me like a fueling issue. Obviously somewhere between the fuel pump and injectors...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-08-2008, 06:31 PM
Replies: 2
Views: 564
Posted By h8tred

Re: does anyone have a write up on how to take a roof off and reskin it for a hatch (black0hatch)

If you pull the weather stripping off in the gutters, and clean the sealant up, you'll see tack welds.
Forum: Honda CRX / EF Civic (1988 - 1991)
08-05-2008, 06:57 PM
Replies: 5
Views: 1,576
Posted By h8tred

Re: (efsublime)

Wow, it's like the schools aren't even trying anymore, so long as you can breath on your own, and manage not to crap yourself they'll pass you.
If I read your jumble of crap correctly, it sounds...
Forum: Tech / Misc
05-02-2008, 04:00 PM
Replies: 129
Views: 246,765
Posted By h8tred

Re: (h8tred)

Nothing? There is a severe shortage of EGs in the scrap yard, or I would look. Judging by the date code, I feel safe assuming that it's a 93-94... Meh...
Forum: Tech / Misc
04-30-2008, 02:39 PM
Replies: 129
Views: 246,765
Posted By h8tred

Re: (showbowt)

Anyone ever figure out what the PM9-7 came from? The one I just got has a 93 stamp.
Forum: Honda CRX / EF Civic (1988 - 1991)
03-07-2008, 09:33 PM
Replies: 5
Views: 514
Posted By h8tred

Re: Glow Shift gauges into '90 Si, help please?! (Importcustomx)

^

Thanks, it's been so long since I've actually been active in the Honda-Tech forums, that I wouldn't have known which way to point him.
Forum: Honda CRX / EF Civic (1988 - 1991)
03-06-2008, 09:45 PM
Replies: 5
Views: 514
Posted By h8tred

Re: Glow Shift gauges into '90 Si, help please?! (Arthas)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arthas &raquo;</TD></TR><TR><TD CLASS="quote">Hey all,

I bought an OIL PRESSURE and FUEL PRESSURE...
Forum: All Motor / Naturally Aspirated
03-06-2008, 09:41 PM
Replies: 4
Views: 1,529
Posted By h8tred

Re: Hayabusa Throttle Body on a SOHC has anyone done it (mars-EF-LS)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mars-EF-LS &raquo;</TD></TR><TR><TD CLASS="quote">Where's a good website where I can find some info on...
Forum: Welding / Fabrication
01-25-2008, 05:59 PM
Replies: 24
Views: 1,409
Posted By h8tred

Re: (96 GSR-T)

Wow, good to know who I'm not buying products from there Tony. I guess every square/rectangular catch can ever designed is ripping you off. Shape is nothing more than pure aesthetics. It's what's...
Forum: Vehicles for sale
09-25-2007, 06:59 PM
Replies: 4
Views: 2,809
Posted By h8tred

When I seen the "Custom Suzuka Blue" I was like...

When I seen the "Custom Suzuka Blue" I was like oh god, here we go... But, damn is that a beautiful paint job. The whole car is damn near flawless. With one exception. You screwed into the dash, just...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-23-2007, 09:18 AM
Replies: 4
Views: 407
Posted By h8tred

Re: is the Dx ad Si heads the same?? (JustAnotherRex)

Like he said, the casting of the head is the same, the only difference is the valve springs, and the cam. Just swap over all the SI valvetrain into the DX and slap it on.
Forum: Honda CRX / EF Civic (1988 - 1991)
05-11-2007, 10:58 AM
Replies: 8
Views: 1,617
Posted By h8tred

Re: Right blinker=blown fuse?? (xjustinx)

Right on, glad you got her figured out.
Forum: Honda CRX / EF Civic (1988 - 1991)
05-11-2007, 10:54 AM
Replies: 10
Views: 673
Posted By h8tred

Re: d16a6 headgasket interchangability (89efDUSTY)

I only paid 3x.xx for mine from Auto Zone. However, I would get the head surfaced and be damn careful scraping the old gasket off the block, the metal ones are less forgiving when it comes to gouges...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-11-2007, 10:50 AM
Replies: 11
Views: 1,136
Posted By h8tred

Re: PLEASE! NEED OIL LIGHT ADVICE ! (Crx Jimmy)

You ever heard of using atf and letting it idle for a bit or something? A friends dad was telling me about it. He said he did it at every oil change, and when he finally pulled the engine apart 10 or...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-09-2007, 03:49 PM
Replies: 11
Views: 1,136
Posted By h8tred

Re: PLEASE! NEED OIL LIGHT ADVICE ! (saikouEF8)

The sensor itself reports on oil pressure, not level. So you're loosing pressure somewhere. Could be the oil pump going, or perhaps the screen getting clogged. I think I would start with the flush...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-09-2007, 09:43 AM
Replies: 10
Views: 673
Posted By h8tred

Re: d16a6 headgasket interchangability (njn63)

I urge you to use the D16z6 head gasket as it's metal... Makes for less headaches when the head has to come off again. I think it's just a hair thinner than the OEM A6 one. I can't remember though.
Forum: Honda CRX / EF Civic (1988 - 1991)
05-09-2007, 09:41 AM
Replies: 8
Views: 860
Posted By h8tred

Re: b18c1 in a crx (JustAnotherRex)

I have yet to come across one with power steering...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-08-2007, 11:04 AM
Replies: 8
Views: 2,347
Posted By h8tred

Re: code 10 (stemiched)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stemiched &raquo;</TD></TR><TR><TD CLASS="quote">So my car has been running perfectly fine but im tired...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-08-2007, 10:58 AM
Replies: 9
Views: 1,385
Posted By h8tred

Re: intake manifold swap problems (89efDUSTY)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89efDUSTY &raquo;</TD></TR><TR><TD CLASS="quote">I still don't get why people throw water and soap on...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-06-2007, 09:56 PM
Replies: 12
Views: 2,000
Posted By h8tred

Re: (iandavis90)

The only difference with the SI/DX is the final drive, the DX has a longer/taller final drive hence the higher top speed. Depending on mods, the si will be quicker, but if you're putting down some...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-05-2007, 10:58 PM
Replies: 12
Views: 2,000
Posted By h8tred

Re: (enkeiteg)

My D16a6 was faster with my DX trans than the SI that's in it now. I can't pass 115 now, however, with the DX, I had the needle buried. The only downfall of the DX trans is the bearings. Other than...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-05-2007, 10:31 AM
Replies: 8
Views: 1,617
Posted By h8tred

Re: (mrcrxtra)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrcrxtra &raquo;</TD></TR><TR><TD CLASS="quote">http://kalecoauto.com/index.ph..._id=6...
Showing results 1 to 25 of 497
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 03:23 PM.