FNWERKZ Performance - K20 K20Z3 K20A2 head on a K24Z7 block
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
FNWERKZ Performance - K20 K20Z3 K20A2 head on a K24Z7 block
I want to give shots out to Jen and Fern at FNWERKZ for helping me out on my project. I am going to dyno my car with a stock internal K20Z3 motor (205 on a Mustang dyno untunned) and then dyno it again with the same parts just a different block, and that block is the mysterious K24Z7.
This will be a 100% write up, no secrets will be kept from stopping some one to do this on their own. There is some hearsay that HPD and Hytech put something like this together but who knows, no one has stepped up and shown how to do it. The MAIN write up will be here on HT. All the other forums are gonna get cliffs and a link to here.
Once again I need to give shots out to Fern and Jen at FNWERKZ in Las Vegas for making this possible. But for the meantime, I will just leave this here:
This will be a 100% write up, no secrets will be kept from stopping some one to do this on their own. There is some hearsay that HPD and Hytech put something like this together but who knows, no one has stepped up and shown how to do it. The MAIN write up will be here on HT. All the other forums are gonna get cliffs and a link to here.
Once again I need to give shots out to Fern and Jen at FNWERKZ in Las Vegas for making this possible. But for the meantime, I will just leave this here:
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: FNWERKZ Performance - K20 K20Z3 K20A2 head on a K24Z7 block
FA5 that looks like a base model & FlashPro it's going to be tuned by Church in Las Vegas. The build is going to take a bit longer than expected because I am waiting John Russakoff @ http://jspfab.com/ to start on the custom header.
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: FNWERKZ Performance - K20 K20Z3 K20A2 head on a K24Z7 block
Motor is done. Timing cover and chain issues have been solved. My buddy John Russakoff from JSP performance JSP Fab is making the header. I just an RRC with a custom TB and adapter, RDX injectors on deck along with the clutch and fly wheel custom tranny etc etc.
But HT is Fing dead. I'm gonna let this thread die. A magazine has interest so I will drop this **** and just hook them up.
Later HT, you were dope as **** 6 years ago.
But HT is Fing dead. I'm gonna let this thread die. A magazine has interest so I will drop this **** and just hook them up.
Later HT, you were dope as **** 6 years ago.
Thread
Thread Starter
Forum
Replies
Last Post
jdm_xsi206
Honda Civic / Del Sol (1992 - 2000)
9
04-15-2010 11:26 PM