1994 civic cx with h22 swap- drivers side axle rub-
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2015
Location: Las Vegas
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
1994 civic cx with h22 swap- drivers side axle rub-
Hey guys, just bought a 94' hatch with a Jdm h22a swap in it for cheap, And now I know why. Went to replace some broken wheel studs, and came across the drivers side axle rubbing against the fork. The passenger side looks to have about a .25-.5 inch of clearance from the fork.
Little background on the car:
*It was originally slammed on the ground, but I raised it up about an inch.
*Guy went backyard ghetto cheap with everything.
*The alignment is really badly off.
*Complete **** wiring job.
What can cause rubbing of the axle on the fork? I will post up pictures tomorrow.
Any info will help get me in the right direction with this car.
Little background on the car:
*It was originally slammed on the ground, but I raised it up about an inch.
*Guy went backyard ghetto cheap with everything.
*The alignment is really badly off.
*Complete **** wiring job.
What can cause rubbing of the axle on the fork? I will post up pictures tomorrow.
Any info will help get me in the right direction with this car.
Thread
Thread Starter
Forum
Replies
Last Post
blend-in
Honda Civic / Del Sol (1992 - 2000)
8
07-03-2008 07:38 PM
SloCivicHMM
Honda Civic / Del Sol (1992 - 2000)
4
05-06-2002 05:36 PM