Cluster Swap Question
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: knee deep in the dead
Posts: 4,529
Likes: 0
Received 0 Likes
on
0 Posts
Cluster Swap Question
Ive been reading up on archived information and material but couldnt seem to find an answer for my question. Im planning on doing a JDM ITR cluster swap into my 94cx. Well anyway, I have the pinout information that I need, but I was wondering as to if having a pre 98' JDM ITR cluster or 98'+ Cluster would make any sort of difference what so ever as far as having the cluster work properly considering the wiring diagram/info i've obtained from here:
https://honda-tech.com/zerothread?id=504396
Thanks in advance.
-ian
https://honda-tech.com/zerothread?id=504396
Thanks in advance.
-ian
#2
Honda-Tech Member
Join Date: Aug 2003
Location: Ottawa, Ontario, Canada
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cluster Swap Question (ian)
You will need to rewire alot of stuff. It's not tough or anything, but it's not plug and play. Acquire the wiring diagrams for your clips, and the cluster.
As for fitment, you will need to get your plastic tram remolded to accomodate the new cluster, since it's longer/winder and more rounded off than your current one.
Good luck, should be fun.
Andre
andre@totaljdm.com
As for fitment, you will need to get your plastic tram remolded to accomodate the new cluster, since it's longer/winder and more rounded off than your current one.
Good luck, should be fun.
Andre
andre@totaljdm.com
Thread
Thread Starter
Forum
Replies
Last Post