Help with header install
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: San Diego, CA, USA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Help with header install
Ive already searched and found nothing. What are good methods to install a header? I was able to remove the stock one after some wiggling and jacking the car up high. Then I removed the subframe stiffener bar and the passenger side engine mount/bracket. The new header gets caught up on the subframe.
#4
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with header install
the engine needs to come out for the header install.
naw jk, loosen a motor mount if you need more space (tilt the engine to the other side). You should be able to twist/tilt/wiggle it in there.
naw jk, loosen a motor mount if you need more space (tilt the engine to the other side). You should be able to twist/tilt/wiggle it in there.
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: San Diego, CA, USA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with header install
Looks like that is the only way. Loosen the mounts, lift, tilt engine to get it in.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with header install
i didn't loosen the motor mount, i just had a friend tilt the engine using the crankpulley bolt and a breaker bar (away from the header).
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: San Diego, CA, USA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Thread
Thread Starter
Forum
Replies
Last Post
RHardin15
Acura RSX DC5 & Honda Civic EP3
8
03-28-2007 05:49 PM