Wont rev past 1k with chipped po6!! HELP
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: storrs, CT, 06850
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Wont rev past 1k with chipped po6!! HELP
My bb6 runs perfectly with the stock H computer but when i plug in my chipped po6 the engine wont rev past 1k when the car is moving, and it will rev past 1k when standing still. my speedometer doesnt work but im getting no CEL's. Can anyone please help me!!!! the
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: storrs, CT, 06850
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wont rev past 1k with chipped po6!! HELP (Acidcrakker)
It is a JK-tuning ECU, Do you really think its the ecu? We tried the ecu in my friends integra and it ran perfectly. I just went outside and i took apart my gauge cluster to get the vss working, but i couldnt get it working. I took it around the block on the stock obd2 ecu and the car ran perfect, plugged in the p06 with a h22basemap and wont rev past 1.5k. I am using a obd2a to obd1 conversion harness as well. Everything was bought from jk tuning. Ugh
#6
Honda-Tech Member
Join Date: Oct 2003
Location: Chicago
Posts: 6,619
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wont rev past 1k with chipped po6!! HELP (Eucalyptus lude)
Post this in the ECU/Tuning forum. There's only one person here who can reliably help you with this, and that's 98vtec. You should get more / quicker responses there with more users.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: storrs, CT, 06850
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wont rev past 1k with chipped po6!! HELP
I know I am 5 years late with this reply but the issue was a bad fuse box under the dash. I replaced my fuse box and all my issues went away..... just FYI
Thread
Thread Starter
Forum
Replies
Last Post