ecu question
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
ecu question
my friends 94 dc hatch has a d16y8 motor swap and is running a chipped p28 ecu. the rev limiter is up at around 7500 rpm. i plugged his ecu into my 94 ex coupe and my rev limiter was still at 6800rpm. do i have to wait for a little while for the ecu to reset or something? any help is appreciated.
#3
Honda-Tech Member
Re: (perseverance)
like sometime if it has a check engine it wont work. i have a p28 ecu but mine go all the way 2 9 1/2 i tryed it on my bros b18c1 it work but when it was hitting 9 1/2 it was dieing. ur engine has to soupert the ecu.
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
well i put his 7500 rpm rev limit ecu in my car and it still had the rev limiter at 6800. and no cel's... and btw i swapped clusters the other day so i know everythings plugged in and the bulbs aren't broken.
Thread
Thread Starter
Forum
Replies
Last Post