Prudz 4G N20 87.25mm 11.5 comp Build
#52
#56
Junior Member
Join Date: Aug 2007
Location: Mesquite, Texas
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Re: Prudz 4G N20 87.25mm 11.5 comp Build
Is that a DEI "remote start" warning on the radiator support? Familiar sticker. Also I see OP is familiar with a certain anonymous image board.
#57
Re: Prudz 4G N20 87.25mm 11.5 comp Build
i think im going to beat both of you guys on the finished build up lol
haha ,,,,but stayed tunned to mine as well,,maybe by the time i spray my car you guys will have ur motors finished,,, but dyno for me this monday wish me luck,,,i have a feeling im going to need it
haha ,,,,but stayed tunned to mine as well,,maybe by the time i spray my car you guys will have ur motors finished,,, but dyno for me this monday wish me luck,,,i have a feeling im going to need it
#58
Re: Prudz 4G N20 87.25mm 11.5 comp Build
Haha yah, i knew you would be finished long before me. Who knows though, maybe when you get your nitrous tune i will be getting my tune and nitrous tune. I am HOPING for my car to be fully tuned by the beginning of July but we will see. There are a bunch of issues i still need to take care of. At least i am almost done buying parts. I am really sick of spending money lol.
#60
Junior Member
Join Date: Aug 2007
Location: Mesquite, Texas
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
#62
Junior Member
Join Date: Dec 2008
Location: Las Vegas Nv
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: Prudz 4G N20 87.25mm 11.5 comp Build
nice build, wish you luck. July isn't to far away hope you get done on time. Props on the head light they look clean as f**k. I'm gonna save that post in case. i'm sure it'll come handy
#64
Re: Prudz 4G N20 87.25mm 11.5 comp Build
Thanks flacO, it suprisingly was more work than i thought it would be. They turned out pretty decent though. I'll probably redo them in fall and drop some TSX projectors in them.
BlackCatt, The colour that i am going to paint the car is the colour off the lexus is350 sedans. It is called Black Sapphire Pearl. It is a really dark grey pearl. Looks soooo nice in person. That or Smokey Granite Mica. Both are so nice, i will have to go look at both colours in person again to make my final decision.
BlackCatt, The colour that i am going to paint the car is the colour off the lexus is350 sedans. It is called Black Sapphire Pearl. It is a really dark grey pearl. Looks soooo nice in person. That or Smokey Granite Mica. Both are so nice, i will have to go look at both colours in person again to make my final decision.
#65
Honda-Tech Member
Join Date: Jul 2007
Location: Garage, Australia
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Re: Prudz 4G N20 87.25mm 11.5 comp Build
That should look awesome. My last prelude i painted jaguar gun metal grey and it looked great but i think it would have been better even darker grey. Goodluck with it.
#66
Re: Prudz 4G N20 87.25mm 11.5 comp Build
Today after a long day of studying i decided that the few hours i had to rest i would put towards my wiring harnesses. I started doing my headlight harnesses today. Stopped by a Princess Auto to look for wire loom, heat shrink, zip ties, and a few other misc things. Sadly, they did not have the wire loom i was looking for so i did not purchase anything yet.
Tonight i unplugged the passanger and driver side headlight harnesses and started pulling the old wire loom and electrical tape mess apart. I just used a knife too cut everything apart (carefully) and then some painters tape to temporarly label everything. my Helms did not really come in much use this time around like the last time i did the harnesses. I now do not remember what a couple of plugs are for and the Helms fails to have the wire colours for the plugs, just numbers and a picture that is difficult to read since not all harnesses (for example this one) were identical. By that, i mean that where the main harness would branch off into 3 sections lets say, and their lengths would be obvious to find the labelled numbers, this harness would brand off in 2 and have another single branch off. That probably made very little sense but whatever. If anybody knows of a file on the net floating around with the wire colour diagrams please let me know, i could really use it. Other wise i have to find someone with a lude to let me look at their harnesses.
Here are some pictures i took tonight. Once i figure out which connectors i can get rid of i'll show in detail how to remove the pins and properly remove the connector. At that point i'll go buy the heat shrink, loom etc and show once again in detail how to use the stuff to make a custom harness
Harnesses with all the old tape and loom
Both harnesses stripped
Passanger side
Driver side
More to come guys/girls!
Tonight i unplugged the passanger and driver side headlight harnesses and started pulling the old wire loom and electrical tape mess apart. I just used a knife too cut everything apart (carefully) and then some painters tape to temporarly label everything. my Helms did not really come in much use this time around like the last time i did the harnesses. I now do not remember what a couple of plugs are for and the Helms fails to have the wire colours for the plugs, just numbers and a picture that is difficult to read since not all harnesses (for example this one) were identical. By that, i mean that where the main harness would branch off into 3 sections lets say, and their lengths would be obvious to find the labelled numbers, this harness would brand off in 2 and have another single branch off. That probably made very little sense but whatever. If anybody knows of a file on the net floating around with the wire colour diagrams please let me know, i could really use it. Other wise i have to find someone with a lude to let me look at their harnesses.
Here are some pictures i took tonight. Once i figure out which connectors i can get rid of i'll show in detail how to remove the pins and properly remove the connector. At that point i'll go buy the heat shrink, loom etc and show once again in detail how to use the stuff to make a custom harness
Harnesses with all the old tape and loom
Both harnesses stripped
Passanger side
Driver side
More to come guys/girls!
Thread
Thread Starter
Forum
Replies
Last Post
Cap'N Chronic
All Motor / Naturally Aspirated
7
11-16-2012 10:40 AM
gookspeed
All Motor / Naturally Aspirated
9
09-01-2004 10:05 PM