Windwalker

Not sure if intersection light is correct. I've seen them called cornering\side fog lights

these are lights that would replace the side\front turn signals and stay on as you're making a turn.

here's a set that sold on that auction site
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

I've got a lead on them locally and wondering if plug and play is really true

any pointers?

JDMLude850

i would imagine it being plug & play

cfran55

how do you install these? do i need to remove the stock harnesses

the harness i have has everything in line but im wondering if i remove the stock one on my car how about the fog and the horn wiring?

|eG|BB4

I would not imagine it being plug and play, because our factory set-up does not stay on while our turn signal is on. I do believe it can be done without the harness needed for it as well.

cfran55

sorry i have the harness that includes everything for the turn signals/sidemarker and the cornering light i just dont know how to hook it up

Kane666

shimee on prelude power has a writeup on putting these in

cfran55

his was for a 5th gen im looking for one for a 4th gen

cfran55

ok i got this from a seller

You`ll need to find the relay which is behind the left headlight, close to the cruise control actuator (a big round thing with a single wire going to the firewall). You have to disconnect this relay and piggy back the blue fuse in it, then you disconnect the left and right turn signals and piggy back the left and right cornering lights, and last you disconnect the right corner light/which illuminates first when you turn on the lights switch once, and piggy back the two connectors left to it.
Easy enough, it makes sense when you think about it.
Hope that helps!

by piggybacking does he mean splicing?

cfran55

any idea i want to get these in today