JDM H22 Crank Posistion Sensory bypass help
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: San Jose, CA, USA
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
JDM H22 Crank Posistion Sensory bypass help
Car: 99 Prelude base model. 5 spd, blown engine. USDM ECU.
Motor replacement: JDM H22 (no crank sensor)
My question is how to bypass the sensor. I have been reading up articles on how to bypass it on Civics/integra but haven't found any useful info on 97+ Prelude
Any info would on how to bypass this would be GREAT!
Thanks!
Motor replacement: JDM H22 (no crank sensor)
My question is how to bypass the sensor. I have been reading up articles on how to bypass it on Civics/integra but haven't found any useful info on 97+ Prelude
Any info would on how to bypass this would be GREAT!
Thanks!
#2
Honda-Tech Member
Join Date: Oct 2008
Location: Jacksonville Beach, Florida, United States
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM H22 Crank Posistion Sensory bypass help
You can't bypass it, the sensor on the JDM engine is inside the distriubutor, you either have to rewire or swap your old distributor, external coil, oil pump, ckp sensor and lower timing gear over from the old engine.
#4
Re: JDM H22 Crank Posistion Sensory bypass help
can you tell me how to wire ckp sensor to dizzy or ecu. In 95 honda accord manual ex
Thread
Thread Starter
Forum
Replies
Last Post
rig9896
Honda Accord (1990 - 2002)
2
05-22-2013 04:29 AM