L8ApexH22

Ok, I have a '95 'Lude VTEC which is stock (GS). Recently changed the tranny, and recently had the main and rod bearings and the oil pump replaced.

Now, it's a bit hotter than it was before the work was done, but all of a sudden, my radiator fan won't come on. I replaced the thermostat, made sure there was a good coolant / water ratio, and it still heats up to the bar just past halfway. Radiator was replaced about two years ago, and yes, I checked the fan fuse...it's good.

Any other ideas? Bueller? Bueller? Anyone?

95PreludeSi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by L8ApexH22 &raquo;</TD></TR><TR><TD CLASS="quote">Ok, I have a '95 'Lude VTEC which is stock (GS). Recently changed the tranny, and recently had the main and rod bearings and the oil pump replaced.

Now, it's a bit hotter than it was before the work was done, but all of a sudden, my radiator fan won't come on. I replaced the thermostat, made sure there was a good coolant / water ratio, and it still heats up to the bar just past halfway. Radiator was replaced about two years ago, and yes, I checked the fan fuse...it's good.

Any other ideas? Bueller? Bueller? Anyone? </TD></TR></TABLE>

Check out part number 16. That is the fan switch. It may not be telling the fans to cut on.


Have fun in GS with the celica GTS's, cooper S's, and mazdaspeed proteges...

vtec161

i just swap in a h22a and my fan wont come on either..i've check all my fuses and the cooling fan module near the ecu but now im kind of maze. I've also check out the ECT sensors..i feel your pain

vtec161

nevermind it works now :-D...good luck man