Build for home made intake pipe
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Houston, TX, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Build for home made intake pipe
I am needing to put together a custom intake for my new TB and manifold.
The TB is top mount 3" outlet. Is going inside 2001 bb6 engine compartment.
What I was thinking was running a 90º elbow off the TB, then running a pipe to near the passenger side of the vehicle then putting on the BPI stack with the AEM filter.
What I need is a shop or place that can offer me the aluminum piping and 3"-3" couplers and clamps I will need. Suggestions are welcomed, all I find on ebay with 3" aluminum and 3" silicone is few pipes I might actually have a use for.
The TB is top mount 3" outlet. Is going inside 2001 bb6 engine compartment.
What I was thinking was running a 90º elbow off the TB, then running a pipe to near the passenger side of the vehicle then putting on the BPI stack with the AEM filter.
What I need is a shop or place that can offer me the aluminum piping and 3"-3" couplers and clamps I will need. Suggestions are welcomed, all I find on ebay with 3" aluminum and 3" silicone is few pipes I might actually have a use for.
#2
Join Date: Sep 2007
Location: San bernardino, ca, 92407
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: Build for home made intake pipe (harmonichonda01)
muffler shops my good friend. they would have everything you need and even be able to bend stuff for you.
on the couplers.... i hate to say it but i suggest "autozone" untill you order some good ones from the net best of luck.
on the couplers.... i hate to say it but i suggest "autozone" untill you order some good ones from the net best of luck.
#4
Honda-Tech Member
Join Date: Jan 2006
Location: The 757
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: Build for home made intake pipe (harmonichonda01)
Trending Topics
#9
Re: Build for home made intake pipe (harmonichonda01)
Would you mind posting pics of your new TB. It seems like it would be hard to get all that under the hood of a lude. Maybe thats not an issue, but I would be interested in seeing what you have going on.
#10
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Houston, TX, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: Build for home made intake pipe (M@)
no can do, is prototype with billet manifold too
pix wil be posted after proper photographer takes them for magazines and the machinists
Likesay hopefully come mid January we can release it to the public, expect 300 for the manifold ported and anodized, 300 for TB also
Ax, that dude on ebay isnt really selling the pipe, does he or his comp have a #?
Modified by harmonichonda01 at 12:23 PM 12/13/2007
pix wil be posted after proper photographer takes them for magazines and the machinists
Likesay hopefully come mid January we can release it to the public, expect 300 for the manifold ported and anodized, 300 for TB also
Ax, that dude on ebay isnt really selling the pipe, does he or his comp have a #?
Modified by harmonichonda01 at 12:23 PM 12/13/2007
#11
space cadet
Join Date: Nov 2002
Location: Spec Shakesland
Posts: 6,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: Build for home made intake pipe (Acidcrakker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Acidcrakker »</TD></TR><TR><TD CLASS="quote">Ive even heard you can use PVC piping to get that job done.</TD></TR></TABLE>
If you want to pass out you can. PVC piping creates toxic gases when heated to the degree of an engine compartment.
If you want to pass out you can. PVC piping creates toxic gases when heated to the degree of an engine compartment.
Thread
Thread Starter
Forum
Replies
Last Post