kirkland

Love how it gets rid of that thing hanging from the firewall.

Charlie Moua

iTrader: (3)

so how do you remove the stock fuel rail inlet fitting?
is it threaded on the other side or do I just pull it out with force?

MadLorGLK

awesome tnx

traction issuez

Threaded, u can try double nutting it to remove it but much easier if u have someone with a torch to heat up the fuel rail but make sure there is no fuel in the rail for ovious reasons to ease of removal.

It was definite a bitch a half to remove it, so have fun

thegatekeeper14

theres always this option, they have a banjo style as well. id check with them. its a great design and works well.

http://www.mnhondas.com/showthread.php?t=11594

coupedragracing

quick question how do these work.. Swivel-Seal Straight Hose End. does it just slide over hose and no leaks. or what.. is there clamp hiding like the Russell Tube Seal Hose Ends? thanks Jose

spAdam

iTrader: (1)

If assembled properly, they seal themselves quite well. No janky hose clamps involved. Watch the tech videos on anplumbing.com and you'll see how it works.

thedb63

your not going to use it again so just vicegrip the the threads and lefty loosey!!

sh!ft

old thread back for the newbies lol.

so, did any one ever answer the question of using the stock flare nut on the oem line coming out of the fire wall to a braided line? instead of just cutting and reflaring??

sh!ft

still waiting....

nineohnine

yes you can i have done it.
use this part
http://www.summitracing.com/parts/EAR-9894DBHERL/
if your stock fitting has a small unthreaded portion on the end you have to carefully cut it off with a dremel. and make it as strait as possible.

its not that hard it took me a while to get the ***** to cut the unthreaded portion off...
but cutting and reflaring isnt hard either and i actually ended up doing that anyhow..
but the stock fitting worked for me for over a year untill i decided to clean it up more and use bulkhead fittings.

sh!ft

so you attach the female end onto the hard line and attach the male end to the 6an fitting after you cut the spaced out portion of the nut?

nineohnine

yes sir. be very careful not to cut the hardline when you cut that spaced portion off(like me lol) otherwise you are going to have to reflare it anyway. and make sure to use teflon paste on the fitting as well.. then just tighten that earls fitting onto the stock fitting then the an fitting onto the earls fitting... instant an conversion lol

page 4 also has an explanation of this and alos a picture of the fitting without the threaded portion that is in question

sh!ft

thank GOD, i did not want to have to go to the extent of cutting and what not.

nineohnine

its actually not that bad using the right tools... i re-routed my fuel lines using 5/8 aluminum hard line so both exit the firewall where the feed line exits stock.. surprisingly it wasn't too hard.. just time consuming...

rhdjdm86

does any one knw how to contact wesv iv got alot problems im runing into . i need this project done thnx guys

rhdjdm86

i got alot of questions need to help

spAdam

iTrader: (1)

What questions do you have? I'm sure someone here could help.

TheSauceSpot

Im sorry to inform but, Wes V passed on a few years back, RIP to a great enthusiast.



While this thread is back to life.. I have a question. anyone with experience using the Jiffy Tite quick connect fittings?

rhdjdm86

hey yea ohhh mannnnnnn that really sux im trying to find out how im supose to get a fitting on the that braket. im thinkn how to do this i got all my fittings i just now need to knw how to get my an fittings on the braket,

rhdjdm86

yea so do i weld on the line ???

spAdam

iTrader: (1)

Show us a picture of what you're talking about, your description is a little vague. You shouldn't need to weld anything.

sh!ft

did you have to re-flare the hard line when you installed this????

spAdam

iTrader: (1)

No. That's a compression fitting.

jdmkid1989

im soooo confused on this! So i cut off the fuel line that meets with the filter, but where exactly do i cut it? sorry for the newb question, but im really interested in this